Now it's time to install Windows on the Raspberry Pi 5. Will it work?
Вставка
- Опубліковано 30 вер 2024
- In this video I'm going to install Windows 11 on the Raspberry Pi 5. And let's check if it's going to work this system.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To access the BIOS settings required for the Raspberry pi 5 check out:
github.com/wor...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To download the Windows Installer and image then check out the website:
worproject.com/
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Leave your comment and share it with your network. It's always good to know what needs to be improved.
Don't forget to subscribe to the channel to receive tips and help.
I watched this video on a RPi5 running Windows. I used nearly the exact same setup that you have. What I found was that my USB dongle would disconnect like you mentioned but if I unplug and replug it back in it would work for a bit longer. Doing that repeatedly was enough to get Windows Update to find a new driver for my USB dongle. As soon as it installed the new driver that problem went away and it worked great afterwards. Hope this helps.
0.3 released!
I have a Pi5 purchased with an NVME 512Gb SSD (bought pre-installed.)
I followed this to get Win11 installed on the NVME SSD in a USB 3 enclosure.
Once I had Windows 11 installed, I tried moving the NVME card back into the NVME hat. The UEFI boot was able to boot it but Windows failed with a blue screen and message that "boot files" were missing.
Any suggestions?
swears that the version of the device is not the same and asks to change the config file. hangs after change
i don't have a windows, i tried install windows into a mac from 2011 haha, but need a special version, on my mac m1 windows 11 amd is not sopported, i tried with vitual machine as well but need mutipatition, i tried from the repository for command lines sh, but have problem downloading resources , using custom files, always fails, pff doesn't worth this
I've this error botting the SD: the installed operating system does not indicate support for raspberry pi 5
Same error showing
Same error
Errror showing when i connected a bootable drive to raspberry pi 5 that is the installed OS doesn't indicate support for raspberry pi
once you have done everything in the video, is it possible to remove the SD card and boot from the other hard drive?
Are you sure to have a Raspberry pi 5 ? or in your fantasy.... Doesn't work nothing.....
I'm getting "kernel or device tree is not found or compatible" when trying to boot. What do I do?
Will it work, LAN
waste of time😑
did not understand one word
Can I use USB inside of SD card
don't worry, doesn't works anyway.......