Oreck Orbiter Tile & Grout VLM Cleaning.
Вставка
- Опубліковано 5 вер 2024
- Tile and Grout cleaning video using challenger op, oreck orbiter and or powr flite orbiter. Vlm low moisture style tile and grout cleaning. How to clean tile and grout without the use of expensive chemicals or equipment by Corey Thibodaux. You may also click on the link to donate to first responders.
tunnel2towers....
www.woundedwar...
www.challenger...
www.triforceca...
I usually do hwe however I just cleaned one of my own chairs using your vlm technique after seeing you do a couch in your garage using HEB cloth
This looks 100 times more efficient than what I've been doing to clean the grout. I need one of those machines right away.
Still learning which brushes work well on what surfaces with the Oreck, so these videos are _super_ helpful.
I've been cleaning my Sister's coated garage with the orange brush and some Carpet Details.
The Carpet Details is a nice formula, because it takes the same two scoops of powder for both carpet and concrete, so I can clean the garage with any leftover solution I have from other jobs.
Anywho, I was initially afraid of scratching the epoxy, but it's been working _wonderfully._
Only places I've needed to be sensitive around were areas where the coating was already cracking.
Edit: I like how you used the brush as a driver for the giant pad - I've thought about doing that when the situation warrants it, and that makes me want to give it a try.
Had the same idea when I saw the bigger OP machines that use brushes for their pad-drivers.
About to clean my tile and so glad I came across this video!
The chemicals your using are getting the grout clean !!! Amazing
Hey I was wondering how to use the oreck on tile, this was super helpful thanks man !
Love your videos, thank you very much for your time and information on how you do such a good tile job. You have proved you can get great results with a polished. I want to ask you, I saw that you once made a wet vac into an extraction wand to remove water from indoor tile cleaning. My question is, how would you rate a MOSMATIC surface cleaner WITH vacuum port. So, you could basically clean tile and grout like a truck mount, as in hit the tiles with water from pressure water/gun and not get water everywhere, because the mosmatic would vacuum it out to a drain. Which technique would get better results 1 (scrubbing or pressure), and which method would be easier for the operator 2?
Love your channel and really respect your ethnic Bro! You are a very hard worker AND an impressive body builder! More power to you Bro and THAVK YOU🙏 (the inspirational muscle man)
Hey man thank you for posting this! it has been very educational. I was wondering what floor stripper you use? also would Grout smart, which is a hydrogen peroxide based cleaner work as the hydrogen peroxide cleaner, or what would u recommend? can u do this process without removing the wax from floors?
Great video as always. I have a tile clean up.on Sunday. Do you have or mind sharing the ratio of the floor cleaner / stripper
what pads would you recommend to do the same cleaning on epoxy covered concrete floor using Oreck orbiter scrubber?
How do you know you’re not going to ruin the tiles? X
I wish you could have done this video with a white or light grey grout
I have better than 2500 videos. Maybe you can look around on my channel. I clean what the client asks me to clean. Color has nothing to do with the process
With the chemicals that you use, what kind of risk do they pose to any nearby wood such as cabinets or flooring? I noticed you saying that you spray the tile more lightly by the wood flooring edges to reduce overflow. Is there anything that you do to protect them besides trying not spray too close? Do you neutralize them with the vinegar just in case? Do you wipe it down by hand with a clean cloth afterwards to remove chemicals? How much spray does the Oreck kick up onto cabinets and nearby floors? That’s the only part that has me nervous about doing this myself.
Thanks for the videos that you have made! I find them very helpful.
It won’t hurt the wood, but at the same time it doesn’t seem reasonable to put the wood floor through the same treatment that the tile is getting if you can avoid it. The Oreck doesn’t kick up any cleaning solution. The bigger machines will. I recommend using the Oreck in small areas.
How much totally awesome did you use per each gallon? And peroxide
Would doing that once a week damage the tiles or would I be fine to do so ?
This was a very good video. Thank you for this! I have a question for you. What was the amount of floor stripper, hydrogen peroxide, and water that you combined?
I haven’t measured anything in so many years. It’s like cooking without a recipe. I salt to taste.
I completely understand. Are you able to tell me what I'm looking for when I'm mixing the ingredients?
I seen the pre spray that you was using but, after you got done you sprayed it again was that the same as the Pre Spray
What did you use to soak up the water solution?
Where can i find those drying towels that youre using with your scrubber?
No longer available.
What machine are you using
@@jammihutton2470 the answer is in the title of the video 👍👍
Peroxide/floor stripper / totally awesome ??
Hello,, what's is VLM
Does anyone have any idea what that cloth is he used after the water was extracted? Thank you! : )
Large micro fiber pad
Are you using the orange ring for a house I was under the impression that was for concrete
You want to select a brush that the bristles stay erect. If it is too soft they bend and don’t agitate. If they are too stiff it’s ineffective. Red usually works best on tile and concrete.
Hey Corey. I dont have the orbital, can i use the floor scrubber 175? And if so, which brush to use?
Great video! If I was to do tile with my oreck but I don’t have a shop vac, would what be my next step after using the brush
You would have to try to use enough towels to pick it all up. A shop vac is much more efficient. Please subscribe 😀
Does the white Oreck orbiter have more power than the black one? I was told it did just wanted to check with you.
They are all the same to me. The on off switch is on the handle of the white models
What kind of attachment you using on the orbitor?
Hi there thank you for the videos they are great. I was wondering if you could offer me some help cleaning my floor. I have a very textured porcelain tile floor in my kitchen. I bought the oreck orbiter with a blue brush and the brush seems to not even touch the dirt on the floor if I hold it in the same spot for a minute, where as if I take a small scrub brush and do it by hand the area some clean. Am I using the wrong brush, are the bristles to stiff? Should I use a green or black brush or any cleaner I can try out?
Change your cleaning solution to something stronger. Use zep floor stripper from Home Depot. Mix it 50/50 with water. This will dissolve whatever is on the floor.
@@CarpetMuscleTV is there a color brush you like to use over others?
@@jonathondenys6843 i tend to use the red brush the most. There is a chance that you may be trying to remove floor finish if it was mistakenly applied. Mop n glow is common. This will require the mix I mentioned and a black pad under the Oreck to remove more efficiently
Hello quick question? Can I use floor stripper or totally awesome or both together? Also can i use regular peroxide also?
In general mixing chemicals is not a good thing especially when you're not sure
What floor cleaner are you using? I bought my orbiter over 20 years ago. Just moved to Florida with all tile floors so I’m back to using it. However the zep grouper cleaner and brightened I’m afraid will strip the sealer. Thoughts?
Cleaning solutions video
ua-cam.com/video/c8YzqlSDZSY/v-deo.html
@@CarpetMuscleTV haha. Not grouper. Grout! But I’m sure you knew what I meant. 😁
@@CarpetMuscleTV ok I saw carpet cleaning solutions. Are you saying use the same for tile? Did I miss something!
@@CarpetMuscleTV "This video is unavailable" 🥲
Question, do you wet the pad before going over with the the oreck? Or is it dry?
No the towel is dry when you begin. If it gets too wet it will throw water around. One towel goes a pretty long way
@@CarpetMuscleTV awesome! Ty sm. Keep up the awesome work. Love your videos.
Whats the name of your machine and model number?
Orbiter xl
Do you have to neutralize after using floor stripper?