Love this truck super clean. I hope my 68 F100 comes out like this. True inspiration thanks guys. Love to share my truck on the channel when it’s closer to completion.
I like that bumper; the suff the prerunner fiber bed crowd use & do is diff than jeepers, learning alot about worldly shit & how much ppl in this country love their trucks.
Cool truck Ihave a full size Bronco I built long travel TTB gusseted and plated cut and turned long chomemoly heim joint radius arms. F-250 slipshaft and chromoly axles on King Shocks. The 96 front end glass fenders hood grill lights (made HID) Deaver springs and frame to frame upper King mounts. I rebuilt improved my transfer case, got a Monster built trans, new shafts, gears and lockers on both. Got a nice engine just installed just recent. I need a tailgate rear fenders (ordered) and A/C compressor installed and paint job to get better insurance. Also plan on a 9" off road race truss gears rear, a good GPS, etc.. Lots of work but is great and fun. Maybe see ya in the dirt. Greg of Total Performance from a tip from Fast On Wheels fab shop built my engine and Auto Fab are all down there in Santee.
How are the heimed radius arms on the road? Is there noticeably increased vibration transfer to the chassi/driver? I'm sure it's hard to isolate a difference with 37's. Running heimed radius arms on my f100 build, and bushings on my 96 obs. Have not been able to compare yet. Like the truck! One criticism however, I believe the rims are gaudy and distract from the truck itself. To each his own though!
How are the deaver spring packs working out? I'm building a 69 f100 with f350 beams (1 inch king pins) and was planning on running them as well. Thanks!
What cb antenna is that? Also I’ve always wondered what those red circle things are on the inner fender towards the front of the truck are? A lot of the trucks I see on insta have em
If yall could hit me up id like to talk to yall i got a 93 and would like to go prerunner style instead of mud truck and would like to know where yall got your parts from
I’m surprised these guys don’t have more subscribers based on how knowledgeable they are and how much work they put in.
I appreciate that!
really makes me want to go into crippling debt on my 95 f150
Don’t do it just save for a couple years and do it piece by piece
Carson Schneppershoff me too
@@jeffanderson7256 **Johnny Cash plays** I got it once piece at a time!
i'd rather be in debt for having a badass truck than student loans hahahaha
Aidan Anderson big facts
Such a clean truck, one of my favorite builds on DR.
we followed this build for so long on DR and once the owner Taylor posted it for sale, we had to get it!
Love these type of videos. I always like walk-arounds. Gives better details of the build.
Love this truck super clean. I hope my 68 F100 comes out like this. True inspiration thanks guys. Love to share my truck on the channel when it’s closer to completion.
I've got a 92 Ford Bronco and this set up really put things into perspective!!! Keep up the good work!
That frame is amazing. The rad support mounts and it's absolutely beautiful
I FEEL THE NEED!! THE NEED FOR TWEEEED!!
Man that 94 body style looks nice still
cool video...love the BTR's (my son has them on his F150 Pre-runner)..and I'm a true I-Beam guy..a lot of clean fab...Thanks!
Very cool truck!! I would love to have that for a daily driver!!!
Very nice truck!
I've been wanting to build that exact truck forever! That is badass. I started with a 1993 flareside. Thinking of keeping the stepside bed though.
Literally my dream truck, that’s exactly what I want to do.
Top work as always guys..
I really love this truck!!!
Love the walkaround series idea! Keep it up!
Oh man I'm in love with the head lights must have
Sweet vid and truck! I love the truck reviews
Really nice work.
Friggen awesome truck!
I know this video is old but rad truck! Gonna copy this for my bronco build
I like that bumper; the suff the prerunner fiber bed crowd use & do is diff than jeepers, learning alot about worldly shit & how much ppl in this country love their trucks.
I like the placement of the horns
Taylor is a great guy to buy a rig from. Top notch all the way. I love his builds on GFB.
Sick truck
Hello, how can I get the front coilover mount?
Great video bros 🍻
This is most likely crazy but do you think theres any way to make a similar build running a 7.3?!
Building my 94 bronco literally my ideal set up I’ve been slowly working on her for about 3 years
How does the inspection and emissions work in CA? Does the model year 1994 help?
This truck is so dope
Where can i find btr’s? I cant find them. Did the company go under?
Very nice
Tony rojo makes amazing headlight's he is the best in the business
Pretty sure I just seen your build on a raptor forum? Super badass!
This is so bad ass, I wish I could afford a desert truck or to atleast build my Chevy into one
Do the gas hood struts ever make the fiberglass hood bow?
Cool truck Ihave a full size Bronco I built long travel TTB gusseted and plated cut and turned long chomemoly heim joint radius arms. F-250 slipshaft and chromoly axles on King Shocks. The 96 front end glass fenders hood grill lights (made HID) Deaver springs and frame to frame upper King mounts. I rebuilt improved my transfer case, got a Monster built trans, new shafts, gears and lockers on both. Got a nice engine just installed just recent. I need a tailgate rear fenders (ordered) and A/C compressor installed and paint job to get better insurance. Also plan on a 9" off road race truss gears rear, a good GPS, etc.. Lots of work but is great and fun. Maybe see ya in the dirt. Greg of Total Performance from a tip from Fast On Wheels fab shop built my engine and Auto Fab are all down there in Santee.
How are the heimed radius arms on the road? Is there noticeably increased vibration transfer to the chassi/driver? I'm sure it's hard to isolate a difference with 37's.
Running heimed radius arms on my f100 build, and bushings on my 96 obs. Have not been able to compare yet.
Like the truck! One criticism however, I believe the rims are gaudy and distract from the truck itself. To each his own though!
Did you guys have to change the pump for the fuel tank swap?
I have a 1993 F-150 and was wanting the Coilover system. What do I need to do to put them on the truck??
Looking for more I fo on the switch plate in the dash and the headlights. Any help would be awesome. Love the build
Super clean obs. Mine isn't that clean but just put it on 39' projects. Would be sick to run into you guys out in the desert!
Super clean This made me want to sell my 2nd gen cummins.
did you guys see Camburg posted that first walk around of this video on their FB page yesterday.
Super clean!!!!!!!!!!!
Still can’t find that switchboard on wiring specialties website
Where did they get the wide fenders?
I dig the trucks dudes
Truck is perfect 🤤
What size is the steering wheel? Seriously so sick. Very awesome build.
Should be a 350mm!
Wings World thank you so much
Goals right there!!
Can I get that bumper online? I cant tell what the company name is for the bumper? Who made it?
I can't wait till I get my f150 this far on my channel.
Do you still have A/c in that with a 37s??? Or are you limiting the travel?
still has ac and heat!
Hi, what kind of shocks did you use for the hood? I would love those on my Bronco!! Thanks!!!
👍🏼 yea buddy
Where do I find videos of this truck jumping
Bart Barnett @thechristianewing on Instagram 🤘🏼
Quick question, where did you get that center console, I have a 93 4x4 and I’d like to install that into it
Center console ***
What company did you say makes that bumper? I can’t find it when searching google. Thanks dude, love the truck
where can i find that front bumper
Excuse the stupid question. Pre-runner trucks are all rwd?
How are the deaver spring packs working out? I'm building a 69 f100 with f350 beams (1 inch king pins) and was planning on running them as well.
Thanks!
How much money did it take to build this. I’m getting my dream truck a one f250
Where did you get the trans cooler?
its a cbr cooler! I am pretty sure we got it from kartek off road, we get a lot of our parts there. We have a video on mounting it on the channel!
Hey guys, where did you relocate the VSS when swapping from an 8.8 to a 9" rear end? Thanks!
Its on the end of the tailhousing for the trans! Desolate motorsports has a kit to do it, runs about $350
@@WingsWorldChannel Thank you!
Amazing truck, Any advice on getting rid of the white lettering on the ko2’s?
Will Gebhardt Turn them around
So if someone wants to reach out to you for help and tips on building there first prerunner for baja 1000 what would they have to do?
Very clean OBS Ford rig. How come no 4x4?
What does OBS mean?
Camhin1 old body style
@@Camhin1 Old Body Style
Because prerunners arnt 4x4
Is there additional info. On the hub and steering wheel would really appreciate it for my 93
Great video. Is the cab solid mounted? My single cab would flex like hell and the bed would dent the back of the cab.
i have the same truck with a 5.8 and bought j beams from cho at richer racing doing a ttb build like that
cho does super nice work!
Clean
Super sick build! Who did the exhaust?
Us! We made a video on it, go check it out!
Do you guys do customer work?
@@Nck_134 yes, check out @vital_designs on instagram
Does it have 4WD?
Also, if you take a factory long bed and make it a short bed (factory length) does that disqualify you from class 8?
Hey man can you send me the link for the bumper if you can please.
What cb antenna is that? Also I’ve always wondered what those red circle things are on the inner fender towards the front of the truck are? A lot of the trucks I see on insta have em
Rockovert Adventures I think it is the horn
yea those are the horns, as far as the antenna, not sure on the brand, got it at the local ham radio.
Led kit come resistors??
Any night shots of them headlights??
love the videos!!! what kind of dough does that thing take to build?
I would estimate 25k in upgrades + base value of the truck itself.
What about the front suspension and under the hood
What did you use to make the bed stiffner bro!?
My bone stock 460 in my 95 f250 ext cab is begging for this upgrade. To use a 95 Pre Runner to haul cars I buy would be sick
Like the rear bumper, sell? $
What pattern are you running on your Baja Designs S2 Sport? Thanks
Flood pattern for the amber on the rear
How is your front diff mounted with those aftermarket I-beams
Prerunner is rear wheel drive only....lots of suspension travel!
GOOD SHIT RIGHT HERE 💪🏽🤨
Thinking about doing this on a 92
If yall could hit me up id like to talk to yall i got a 93 and would like to go prerunner style instead of mud truck and would like to know where yall got your parts from
Bad ass 🙌
is it 2wd or 4wd?
who made the front bumper?
Daniel Olivares Richer Racing in Oceanside, Ca built this one
The sound turned off after last tweet. If u hear Me not u.
what is your truck???
this is my brothers (Christians), I have a 96 f150, mostly stock though.
Dudes how about some vids of 2000 Tundra I-beams and builds.
LEGIT AF!
Ah carne asadooo burrito 🌯
Get me another beer dragon lady.
I want those same seats in my Colorado