Tabletop Review and look at a CZ 2075 Rami
Вставка
- Опубліковано 8 вер 2024
- CZ makes a 75 for every occasion. Check this one out and see if it is right for you!
Use My amazon Affiliates and help the channel grow.
Camcorder I use: amzn.to/33fhZJh
Cleaning Mat amzn.to/3m4KwKq
Ram: amzn.to/35kdFLD
Just got mine 2 weeks ago. Msrp sky rocket to $845. Out the door for me was $965. A year ago msrp was at $699, and yes they’re discontinued for this model. Great value,great gun, and great edc.
any idea were to buy a new barrel ?
@@dj-gf9co Midway USA
If you live in a state that limits you to 10 rounds, or you just don't want to accommodate a 14-round magazine when you carry, there is a grip extension that allows a little more purchase with the smaller magazine. It's for sale on eBay, and can be found by searching on "CZ 2075 grip extenstion." It is modified from an extension manufactured for another gun, so the front surface sticks out about 1/8 inch beyond the front surface fo the grip, but it's not hard to make the adjustment. I have large hands and I can get about 2/3 of my pinkie on the grip. It took a bit of practicing to squeeze all three digits together, but it now feel spretty natural.
Just found a Rami sitting all alone in the gun case at my local gun store. Jumped on it. Can't wait to pick it up after the wait time.
Great thorough review! Very helpful. I pick up my RAMI on Monday.
Mine came with tritium sights
Just picked up my rami last week. Says 20 on it.. and same unfinished inside. Thanks for the video!
I’m getting mine next week Tuesday can’t wait. I have the same one as you.
thanks, going to the range for my 3rd x tomorrow, ill check back in when i fieldstrip it.
Update (Mine didn't have the finish on the inside too)
Thanks for the info!
Bro where can you even find these I e been looking can find them
Sadly they're out of production. You have to try to find one on the used Market
Love the rami very comfy for edc.
Yah, mine looks unfinished on the inside also.
Purchased a 2075D in June it worked perfectly until it didn't last week when change it when you click click instead of Bang bang.. Now I need to return the weapon to the factory which was a rather annoying process due to the fact I was not able to contact anyone in person regarding my problem until I contacted the marketing department and they explained I had to go through the website to return the weapon. I'm not sure if I'm gonna keep this weapon after it's returned from the factory I've lost confidence with it because it's my Carry weapon and there can be no doubt in my mind that this weapon will work if I need to defend my life.
Watch some video you may be able to fix by yourself, Cajun work have many components. Check your fire pin and fire pin retainer pin, along with spring
Yes it looks like that
nice video 👍
Thank you 👍
Any problems with the failure to feed? I've heard this gun has a decent number of issues with that.
My 2nd mag would not feed. First time shooting it today. Little scary. Maybe a defective mag. Have to try to shoot it again and possibly contact CZ.
I have one since a year ago, just for test purposes I shoot 300 rds of CCI Blazers 115 grain without cleaning it. Non of the round get clogged or misfeed. Its a great gun. By the way, today I did a full clean in it and now its way more sweet with the break in.
Sorry auto correct feature on my device made the first sentence look idiotic. When I took the weapons to the range the last week it failed to fire. To their credit CZ responded quickly via email and sent me a return label to send the weapons back to the factory and it was received within two days, however the email stated it could take 4-6 weeks for them to get the weapon back to me, great!
No worries. CZ has a decent Warranty, but yeah, most Manufacturers are a little slow on repair turn around. Covid isn't helping. I totally understand if you don't keep it. You should always trust your carry.
Another review also spoke of a low bore axis - yet I think it may be an optical illusion caused by the frame being taller so it can ride on the outside of the slide. A taller frame and compact slide = a lower appearing barrel even if the barrel is the same height a.bove the trigger (which is what counts for recoil). You have the gun in front of you (or did) what do you think?
No this design truly does actually lower the boraxis because if you look at where the barrel sits with say a traditional 1911 standing next to a cz-75 at trigger height meaning the triggers are at the same height equal to each other the top of the slide is lower on the cz-75. it's not as much an optical illusion as they literally tuck more of the slide into the frame itself lowering everything else
Any upgrades any of you would recommend? Just purchased a rami looking to conceal it Thank u in advance
Ethan Winters loadout
I use qutips to clean my rails of my rami is that a good idea. Mine was made just like yours
Yes of course you can. I use a q-tip when I apply the lube sometimes on some guns because sometimes the rails aren't as easy to access. Just keep an eye out for fibers that may come off if the q-tip snags a sharp angle. But otherwise it shouldn't affect anything
2019 model has unfinished internals of the frame.
Gun has been discontinued
Thanks for the info
You lost me at let’s look at the box.