TARA Labs Cascade - white & pink noise for burn-in acoustic, headphone, amplifier, DAC, cables
Вставка
- Опубліковано 7 лют 2021
- Exclusive white and pink noise for burn-In acoustic, headphone, amplifier, DAC, cable and others audio electronic component from TARA Labs Cascade htaralabs.com/media/cascade-fr...
Although there have been other “burn-in” test discs used by audiophiles in the past, the discs have mostly been a mix of pink noise and sweep test tones. The new CASCADE noise burn-in disc is a proprietary combination of white noise with frequency tone bursts and pink noise mixed at different levels. However, what makes it really effective is a series of descending and ascending (cascading) multi-octave square sweeps for better and more complete results than any other “burn-in” discs that have been made to date. The CASCADE noise burn-in disc may be used with audio electronic component and with audio cable including cables with attachments such as batteries or filter networks. Before and after results will be obvious with any of these cables.
Red more and download taralabs.com/media/cascade-free-burn-in-disc/
It's a zip file. Be careful.
Silver cables and silver plugs takes 2-3 times more to burn in than copper, 200-300 hours or even more, according to KLE Innovation and others!
KLE Innovations invented the RCA bullet plug using a single point connection instead of the normal ring for the negative connection, a HUGE improvement! Even their copper plug will sound much better than other plugs, most plugs are just using brass coated with gold or silver.
Этот трек НЕЛЬЗЯ НЕЛЬЗЯ НЕЛЬЗЯ использовать для прогрева наушников и динамиков, только для "железа", т.е. цапы, усилители, кабели!
Почему?
@@salezer1906 Очень сложный сигнал, который портит динамик. Читайте инструкцию на сайте для чего этот трек.
Что за бред угараешь что ль?
@@T86670 Посторонний ресурс пишет!
Где ты видешь хамство угараешь что ль надо мною.
Пришли текст сюда меня не запутывай больше.
If I play it on x2 speed, will it burn faster?
No, it is not necessary. The warming-up rate depends on the power
Isn't there sound quality compression on UA-cam? Wouldn't it be better to download from the Internet?
Don't worry for compression, but in any case an pinned comment with link for download.
Is this good for a dac? I just got the hipdac 2 and some new iems. And what volume would be best for it? 😁
Also, I can't find the link to download it on your page 😰
I don't think it should be used for DAC.
The download link has been corrected in the description.
@@all-tech oh okay. Do you know what I could use for my DAC?
@@cottage_pie It just takes time for the electronics to warm up. Usually it is 1-3 months minimum.
@@all-tech okay. Thank you 😊
@@cottage_pie Enjoy!
For sony wh 1000xm3 how long it must be played? 30 min ok?
Usually for headphones at least 100 hours at medium volume
@@all-tech am, just sony is not writing anywhere about white/pink noise in instruction. Very strange. Ok. Thank you! Will do it for 5 hours a day:)
@@valtervalter6441 Usually they do not indicate, there are manufacturers who deny it. But for example, the instructions for one of the MOON cd-player indicated 150,000 hours of warm-up!
Challenge the accelerator because of the sound.
What volume do I leave the phone ringing? 50%, 75%, or 100%?
The higher the current, the faster the warming up. But for new speakers, it is better to start with a low volume gradually increasing the volume or the speakers may deform.
@@all-tech This track is exclusively for burn-in "iron", cables. NOT FOR HEADPHONES OR ACOUSTICS!
@@T86670 pls check description!