How to plumb the ClariSea 3000 to a Red Sea Reefer 425XL

Поділитися
Вставка
  • Опубліковано 10 вер 2024
  • How to plumb the ClariSea 3000 to a Red Sea Reefer 425XL

КОМЕНТАРІ • 19

  • @archiebfunfacts1296
    @archiebfunfacts1296 3 роки тому +2

    Love this ❤️

  • @kevinclasher3160
    @kevinclasher3160 3 роки тому +1

    Very neat job 👍

  • @bobbyknox9258
    @bobbyknox9258 2 роки тому +1

    Nice! 👌

  • @PDMAmit
    @PDMAmit 2 роки тому +1

    Is it a pain to get to the return if you needed…..

    • @paulukreefer5012
      @paulukreefer5012  2 роки тому

      Slightly more hampered but I have had it a year and been able to access it and take it out for cleaning

  • @stuartmartin935
    @stuartmartin935 3 роки тому +1

    Hi Paul, finally got round to getting the sump cut out (was pretty scary!!) plumbed in the Clarisea today (now qualified as a NVQ for Plumber 🤣)
    Thank you so much for your help, and the very helpful vlog 👌🏻
    How is yours running now, with the height set up? Cheers mate 👍

    • @paulukreefer5012
      @paulukreefer5012  3 роки тому +1

      So glad it was some help!! Mine is running great and the roll is not burning too fast... so far so good 🤞

  • @lawrencemann3578
    @lawrencemann3578 2 роки тому +1

    Could you share links of where you got the extra bits from please and size

    • @paulukreefer5012
      @paulukreefer5012  2 роки тому

      32mm plumbing at complete aquatics in the uk. I got pipe, 45 degree, 90 degree and unions😂

  • @karlhal8165
    @karlhal8165 3 роки тому +1

    Where did you get your pipe joiners from bend joiners as in uk as well as thinking putting one in my Red Sea 425 ty

    • @paulukreefer5012
      @paulukreefer5012  3 роки тому +2

      Hi Karl below is a link for the 32mm unions and also the 32mm 90 and 45 degrees joints
      www.completeaquatics.co.uk/catalog/product/view/id/7802/s/amed-adaptor-union-32-mm/
      www.completeaquatics.co.uk/catalog/product/view/id/7909/s/amedic-elbow-45-deg-32-mm/
      www.completeaquatics.co.uk/catalog/product/view/id/7906/s/amedic-elbow-90-deg-32-mm/

  • @logansreef3079
    @logansreef3079 3 роки тому +1

    Following the initial pipe work measure, did you have to adapt the length of pipe work coming from the valve to raise the level of the clarisea?

    • @paulukreefer5012
      @paulukreefer5012  3 роки тому

      I put the Clarisea in the tank on the highest setting I could get it and then measured back from the Clarisea inlet to the return line and did it piece be piece to fit it exactly... does that make sense or answer your question? 🤦‍♂️

    • @logansreef3079
      @logansreef3079 3 роки тому +1

      @@paulukreefer5012 it does, I will be putting one on my upgrade only asked as I’ve seen ‘ read that people put them on stands afterwards to make them more efficient

    • @paulukreefer5012
      @paulukreefer5012  3 роки тому

      @@logansreef3079 yes the brackets that come with it will hang it on the sump wall or a baffle wall in the sump

  • @26Tackle.reviews
    @26Tackle.reviews 2 роки тому +1

    how much water you running through your clarisea (what return pump you got on tank) and how long the role lasting!

    • @paulukreefer5012
      @paulukreefer5012  2 роки тому

      Hi all of my return water runs through the Clarisea. I have. A vectra m2 return pump running at about 55% and the rolls last about 2 months or sometimes more 👍

    • @26Tackle.reviews
      @26Tackle.reviews 2 роки тому +1

      @@paulukreefer5012 sounds money well spent lasting that long! Do they really keep your water crystal clear more than socks? iv just got myself a red sea e260 max with sump! im going to cut the baffle with socks in like you did to fit the clarisea to return water pipe"

    • @paulukreefer5012
      @paulukreefer5012  2 роки тому

      @@26Tackle.reviews I would not start a tank without one… you could probably argue that thick socks might do a slightly better job…. But man!!! You don’t need to clean them… worth its weight in gold