manilove2pwn my friend had one with the bodykit amd everything from the movie lol. He ended up chopping it up and parting it out because it was too much work.
I come to UA-cam and this is posted. Made my day. If I can't work on my car right now at least I can watch one of my favorite UA-camrs work on their car. Wish I lived closer. No good shops that I know of around here.
Thank you for the awesome videos, David. I hope to soon get a new car once I can sale my current one. Hopefully it will get some mods done in the next year. Always hard picking a four door family car that is still fun to drive.
No snow here. But my two cars are both bad off now. 03 Jetta with a bad trans and a 96 Corolla my baby. But it has some work to do. Need to go through the engine and trans, and it looks like one of my axles is about to snap. :(
Went to a shop for new tires for my mustang. Noticed on the way home it felt like it needed an alignment. Next day was going around a corner (slowly) and my back left wheel just came off my car... Turns out they didn't tighten the lug nuts. Can't be too careful these days with double checking what the shop has touched.
Andre Hevesy lmao I once torqued my wheels on with a rattle gun and I absolutely hammered them on. Took them off a week later and they were hand loose. Turns out my rattle gun was low on battery and torqued to less than hand tight 😂
You have to watch shops like sears,tire discounters, Pep Boys,ect,alot of the time the guys doin the tires (mount balances, rotation) are low on the payroll. New to the job,sears you actually have to go to a class to get out of tire rotation and tires to upgrade to alignment Etc. Even then you cant be to safe.
I usually don't comment on UA-cam videos but keep up the great videos. I been watching your videos since I was a senior in high school about 3 years ago and I've got to say Im so excited for your Integra build. It's nice seeing a build I can relate to and something that would be realistic for a broke college student like me. Keep up the great work!!
i had the same problem with my civic, i bought skunk 2 camber, and lost all the bolts on the driver side while driving. super dangerous. glad you were safe and you guys figured out the problem
Hey David, only 1:30 into the video, just wanted to let you know the orientation you were describing the wheel on BlueJZ with is known as "toe", as in "toe in" or "toe out". One of the three elements of alignment-caster, camber, and toe. Camber you obviously know, caster (on a MacPherson strut susp.) is the angle relative from the top of the strut to the center of the wheel, and toe is the lateral angle of the wheel relative to the ground.
Hey David! Look into the Yonaka Exhaust it’s fairly cheap and has practically a normal sized muffler and res. It opens up the car while providing a deep tone! Not too ricer loud and obnoxious.
I've followed your channel for a while now and I'm glad to see you're building an integra now as i recently bought a 2000 integra ls in addition to my turbo 350z . I'm really interested to see what you do with it. Keep putting up good content !
I recently bought a fujitsubo power getter for my dc5 integra. It has a nice note and it isn't excessively loud. Also the build quality is really good. I'm sure they make a dc2 exhaust. You should look into getting one!
Exactly man. UA-cam makes people have to one up themselves/each other, so a minimal bolt on’s Return to how we all got into the scene is super fun. Wish more Tubers would sprinkle these in with all of the 1000hp monsters that are unrealistic without sponsors or owning a company.
Same thing happened to me when I got a camber kit installed on my 2000 Honda civic hatchback. The next day was driving and I kept seeing smoke every time I turned left. Then I found out later on that the two inner bolts came out and was rubbing on my tire. Had to buy a new summer tire...on payday..
ThatDudeinBlue David, I know that happens but DAMN😬 It couldve be worse...😯 awsesome timing! As always, if you wanna build it right the first time around, its always gona be somethin!
This is why I inspect every car before and after I work on them. That "alignment" could have ended badly. The male rbf during the train horn had me dying. 😂
This happened in my gt86.. I was so confident in turning left. But turning right I thought I’d die 😂 Turned out after weeks of looking at it (same problem your wheels has) that it was my LCA ball joint... 🙄 All fixed now. Anyways, I’m gonna watch the rest of this video ✌🏼
Well the power to weight ratio would be awesome. I had cars from d15- j35. K series are better than b series hands down. I had a type r k20a in eg hatch and turbo b18c.... So I honestly can say k is the all motor way
Driveway-built I had all motors and the k series are best for a fresh build. If I didn't have a completely built from top to bottom turbo b series. I would be k.series again
2:46 Liking the Satin Sliver metallic RSX Type S! I own one very similar. Love these old “Integras.” Chill out internet I understand the USDM DC5 is not actually an Integra.
hahah those adjustable upper control arms. same exact thing happened to me with my skunk 2 uppers you really gotta tighten those down good!! glad nothing terrible happened. Love the Honda content David
Same thing happened to me after getting an alignment at tires plus. They messed up my camber and I had brand new coilovers installed and they tried telling me my suspension wasn't working.
I have had the same muffler as the one in the video on my integra for about 3 years. the material inside is slowly deteriorating and it just gets louder and louder by day. definitely time for a change lol
in my experience is doesn't matter what kind of exhaust you buy or whether you run a test pipe or not no exhaust can tame the buzz of the honda engine. Embrace the rasp of your bumble bee exhaust and fly that flag proud brother that's what the honda life is all about.
David do you also have ktuned front lower control arms? i just installed the k1 coilovers, Front upper control arms and rear lower control arms with the camber kit but i do not remember seeing front lower control arms on their site?
David pin this! 😊
Oh I didn’t expect that.. lmao
the mad man actually did it
Ask and you shall receive I guess?
Elijah Olvera lmao
I can't believe that actually works
Thanks for watching guys!
Who out here is part of the Honda life?
I have a Honda Accord
2008 civic si
I have an Integra
on my second Accord with a blown tranny rear quarter panel wall tap damage, 3 rear ends and blown tires to my name
ThatDudeinBlue Not yet. Have to get my license first. I have a hotwheels NSX and a yet-to-be-built revell Civic Si model kit, if that counts. 😂
"Thomas, I Swear!"
- David Patterson 2018
that had me going too haha
lmfaoo
Heyy thats my name
That was so funny!!! 😂😂😂
Sounds a bit like the exhaust from the black Civics in the first Fast & Furious in my opinion
Jonathan Pitchford always wanted to build a civic coupe because of them one's
manilove2pwn my friend had one with the bodykit amd everything from the movie lol. He ended up chopping it up and parting it out because it was too much work.
Just needs a Spoon engine
Lmao I was comment this. Sounds just like it
If only it was a motec exhaust
That thing screams for Type R swap with basic upgrades. Also a JDM front swap would rock.
Pirkka Ruuska no #bugeyes ftw!
He already said no to the bricks
Jdm nose for sure. I don't know how anybody can not put one on.
How/what parts do you need to front swap it??? Only thing I don’t like about the Teg is the headlights
Keep the bug eyes.... America! Plenty of accords on the road.
install a fart can on to alejandra's car and don't tell her
Tjalle V Buuren this ^^^^
Or loosen the flange so it's basically straight piped
I come to UA-cam and this is posted. Made my day. If I can't work on my car right now at least I can watch one of my favorite UA-camrs work on their car. Wish I lived closer. No good shops that I know of around here.
Thanks so much!
you jus don't nkoe dey way
Thank you for the awesome videos, David. I hope to soon get a new car once I can sale my current one. Hopefully it will get some mods done in the next year. Always hard picking a four door family car that is still fun to drive.
Same, because of the temps and snow!
No snow here. But my two cars are both bad off now. 03 Jetta with a bad trans and a 96 Corolla my baby. But it has some work to do. Need to go through the engine and trans, and it looks like one of my axles is about to snap. :(
Loved the Owen Wilson "WOW" at 6:07
Greddys sound really good on anything. It’s not annoying
Aww, you should have chopped up that Greddy exhaust, it actually sounded decent
Didn’t sound as bad as I was expecting lol.
Ryan Shaw it actually didnt sound to bad at all
CDGCaleb I was expecting a lot more raspy and more Honda sound lol.
Actually reminded me of how the Eclipse sounded in the first Fast & Furious
Tabarnacos2 actually yeah kinda did huh? Lol
I had been going through movie cars in my head, because I knew it reminded me of something lol
Went to a shop for new tires for my mustang. Noticed on the way home it felt like it needed an alignment. Next day was going around a corner (slowly) and my back left wheel just came off my car... Turns out they didn't tighten the lug nuts. Can't be too careful these days with double checking what the shop has touched.
Damn that’s crazy man stay safe
Andre Hevesy lmao I once torqued my wheels on with a rattle gun and I absolutely hammered them on. Took them off a week later and they were hand loose. Turns out my rattle gun was low on battery and torqued to less than hand tight 😂
You have to watch shops like sears,tire discounters, Pep Boys,ect,alot of the time the guys doin the tires (mount balances, rotation) are low on the payroll. New to the job,sears you actually have to go to a class to get out of tire rotation and tires to upgrade to alignment Etc. Even then you cant be to safe.
I would fucking sue the SHIT out of them.
I usually don't comment on UA-cam videos but keep up the great videos. I been watching your videos since I was a senior in high school about 3 years ago and I've got to say Im so excited for your Integra build. It's nice seeing a build I can relate to and something that would be realistic for a broke college student like me. Keep up the great work!!
Please go for N/A build
TheHondaTuner turbo will sound much better
wot
Supercharged would be badass
Bailey Rodgers fuck it centrifugal turbo, best of both worlds....
He said he's staying na when he first revealed it
I love the Integra best car Honda ever made.
Bigrich 439 I’ll have to disagree with that, s2000 is the best car Honda has ever mad
Made
NSX?
Nsx
just because its the most expensive doesn't mean its the best
Should of got NOS and a Motec exhaust system
i had the same problem with my civic, i bought skunk 2 camber, and lost all the bolts on the driver side while driving. super dangerous. glad you were safe and you guys figured out the problem
LOVE the vlogs David. They're so fun to watch. Feels like I'm right there with you.
These are great can’t wait till final look, need to upload them quicker!!
Hey David, only 1:30 into the video, just wanted to let you know the orientation you were describing the wheel on BlueJZ with is known as "toe", as in "toe in" or "toe out". One of the three elements of alignment-caster, camber, and toe. Camber you obviously know, caster (on a MacPherson strut susp.) is the angle relative from the top of the strut to the center of the wheel, and toe is the lateral angle of the wheel relative to the ground.
Nice to see you having fun with a project even when things go wrong. That's what it's all about after all.
David is going down 2 cylinders each vehicle, next is a motorcycle
Blacksmith Lewis then rotary?
Tesla next
Its very refreshing seeing someone do stuff to a fwd/honda/acura. So many drift builds can get bland at a point.
GReddy EVO 2 is a great exhaust honestly, I have it on mine and it sounds great but not too loud/raspy compared to other IMO
Just sold my integra for a 2018 sti back in July , oh how I miss it. Kind of , glad David is doing a build lol
If you can, get the 1320 UEL headers for the car. With that header, you'll sound like a subaru.
the alignment people didnt screw it up, they screwed down.
Hey David! Look into the Yonaka Exhaust it’s fairly cheap and has practically a normal sized muffler and res. It opens up the car while providing a deep tone! Not too ricer loud and obnoxious.
"But Daavid! It's where all your performance is.. Daavid!" Loving this series dude, keep it up! 🤙
Will you eventually do an ITR 5 lug swap?
I have to say David, you have good taste, that Integra just looks sick and im stoked to see where it goes.
"Hey Marty do you think this will fit on my Honda?? - Mightycarmods
That sounded pretty damn good
Poor mans type R
BLACkxCLOUdz very poor mans
I've followed your channel for a while now and I'm glad to see you're building an integra now as i recently bought a 2000 integra ls in addition to my turbo 350z . I'm really interested to see what you do with it. Keep putting up good content !
I recently bought a fujitsubo power getter for my dc5 integra. It has a nice note and it isn't excessively loud. Also the build quality is really good. I'm sure they make a dc2 exhaust. You should look into getting one!
Yaassss. Been eagerly awaiting the next episode of this Integra “build”
Yeah, build is a loose term on this one. Just a fun project that people can do themselves easily!
Exactly man. UA-cam makes people have to one up themselves/each other, so a minimal bolt on’s Return to how we all got into the scene is super fun. Wish more Tubers would sprinkle these in with all of the 1000hp monsters that are unrealistic without sponsors or owning a company.
That exhaust actually sounds really good. I vote you make it work
@thatdudeinblue thanks to you and this series I finally went out and bought a civic hatchback to play with, I've always wanted one.
If you don’t need the adj front UCA’s to get the camber back to > -1deg, use the OEM arms.
David... it needs that exhaust... make it work... MAKE IT WORK!
Why is this video soooo much better when you watch with the sound off?! 💯
Same thing happened to me when I got a camber kit installed on my 2000 Honda civic hatchback. The next day was driving and I kept seeing smoke every time I turned left. Then I found out later on that the two inner bolts came out and was rubbing on my tire. Had to buy a new summer tire...on payday..
Nothing should come loose as long as you toque everything and not rush
Been a while, what's up!? Just sold my DC on Letgo not too long ago. One of my favorite handling cars ever. Take care and good luck!
Excited to see the nice project integra coming along fairly smoothly
I had the tanabe medallion touring on my 95 civic. Not loud, loved it
ThatDudeinBlue David, I know that happens but DAMN😬 It couldve be worse...😯 awsesome timing! As always, if you wanna build it right the first time around, its always gona be somethin!
That sounds just like Paul Walker’s Eclipse from “THE Fast and THE Furious”!! Keep it!
This is why I inspect every car before and after I work on them. That "alignment" could have ended badly. The male rbf during the train horn had me dying. 😂
This happened in my gt86.. I was so confident in turning left. But turning right I thought I’d die 😂
Turned out after weeks of looking at it (same problem your wheels has) that it was my LCA ball joint... 🙄
All fixed now. Anyways, I’m gonna watch the rest of this video ✌🏼
Yes! I’ve been waiting for you to upload the teggy 🙌🏼
That car is going look so good visually... Engine wise a k24a2 would be the best bang for your set up...
Omar Sprauve nah b18 anyday
How would a b18 be better than a K24?
Gabriel Kraft more fun. I own a dc5r so I know the k20 well. B engines are true vtec engines and are more aggressive.
Well the power to weight ratio would be awesome. I had cars from d15- j35. K series are better than b series hands down. I had a type r k20a in eg hatch and turbo b18c.... So I honestly can say k is the all motor way
Driveway-built I had all motors and the k series are best for a fresh build. If I didn't have a completely built from top to bottom turbo b series. I would be k.series again
2:46 Liking the Satin Sliver metallic RSX Type S! I own one very similar. Love these old “Integras.” Chill out internet I understand the USDM DC5 is not actually an Integra.
hahah those adjustable upper control arms. same exact thing happened to me with my skunk 2 uppers you really gotta tighten those down good!! glad nothing terrible happened. Love the Honda content David
I'm loving this project already. Can't wait to buy my 1st car and start modifying it
The Camber kit I bought had loc-tite on the threads. I wonder if the alignment shop didn't put some type of thread locker on?
You should look into the apexi ws2 exhaust. It’s super quiet but with just the right deepness.
Exhaust hanger pliers. Know them. Use them. Love them.
I have the exact same muffler on my ek hatch! Cut it up and made my own over "axle" section. Sounds decent.
Had a bad day. This made up for it! For a second i thought i heard some F&F eclipse when revving
Dude! I had this that greddy muffler on my 99 Maxima, sounded great. I always called it the potato cannon because it’s so damn big!
my yonaka exhaust catback from my em1 directly bolted onto my dc2.... fits like it was made for the dc2.
Greddy Evo2 is one of my favorites! If only it came with a smaller tip...
Best video I've seen all day so far
There is something oddly wonderful about the little 4 beep thing when the key is in the ignition, but that might just come from me driving a Honda.
Safety first, always make sure your integra is elevated by a minimum of 5ft before starting the engine
Same thing happened to me after getting an alignment at tires plus. They messed up my camber and I had brand new coilovers installed and they tried telling me my suspension wasn't working.
Like .... I used to have that exhaust on my old dc5 back in 04, miss it.
I know that feeling of hearing a train come by because I live right next to train tracks
Yo David that greddy evo actually sounds really good, buddy of mine is running it on his dc and sounds real clean
EM1 axleback is slightly longer than one for a DC2, big difference is that JDM headers and B-pipes are longer than non-JDM versions, hence the issue.
*waves hand*
"you want to turn it into a grip missle/ pull monster with a old school 90's style"
Happy you made it to the shop in once piece! haha
I love your projects not gonna lie.
Deadass sounds nice. Thought it was gonna be raspy.
If the seatbelt indicator beeping bothers you when the door is open you can go under the seat and there's a plug that you can undo and it'll go away
I have had the same muffler as the one in the video on my integra for about 3 years. the material inside is slowly deteriorating and it just gets louder and louder by day. definitely time for a change lol
That exhaust sounded pretty sweet
You made me finally use this car in Forza, AND I painted it blue...
It's not half bad actually!
in my experience is doesn't matter what kind of exhaust you buy or whether you run a test pipe or not no exhaust can tame the buzz of the honda engine. Embrace the rasp of your bumble bee exhaust and fly that flag proud brother that's what the honda life is all about.
bdan 1324 someone’s never heard of big ass resonators.
hey look! your buddy wore a TFC (toccoa falls college) hat!! i got tons of friends that goes over there!
David i had the same problem with skunk 2 camber kit i lost 2 bolts and my steering felt weird
I would recommend you to use loctite on the camberkit bolts just to be safe mine came loose without anyone messing with them
Exhaust sounds pretty good!
I have that exact same greddy exhaust in my ej coupe.
Love it so much.
Hey David you should check out the Yonaka cat back. Great sound even better price. Its full 2.5" btw.
Best car ever! (now)
I had the same exact thing happen to my teg after my coilover and control arm install
Those exhaust bends are definitely smoother, that with the larger diameter is always a plus. What size piping did you use? 1.75 or 2?
Same thing happened to me on my integra but luckily i didn’t loose the bolts.
10:19 Thanks David, I love you too ❤❤❤
David do you also have ktuned front lower control arms? i just installed the k1 coilovers, Front upper control arms and rear lower control arms with the camber kit but i do not remember seeing front lower control arms on their site?
Actually, never mind haha, found them but they are not available for an EM1 :(
@ThatDudeinBlue so are you planning to keep the integra NA, or do you think you’d go power adder?
You should try to buy Spoon Sport's rigid collars to improve the handling
For me, being an old f-body guy, the screaming chicken is the final word in muscle. I've own 3 and I'm still on the lookout for another one.
Check out the K-tuned 3 inch oval exhaust!
talk about that orange 3G eclipse in the back like what’s been done to it? 2:14
Apexi World sport 2 muffler sounds amazing on my EM1, just a suggestion.
Dang that 3000GT at the beginning is nice.
Is there anyway you can fix the lighting cause sometimes it’s hard to see