Resin coaster Tutorial: molten lava flowing - vibrant red, orange and yellow, with 3D effects
Вставка
- Опубліковано 2 чер 2024
- Lava Flow- I can't tell you how amazing these look in person - the glass adds a nice sparkle to it when it hits the light - Hope you enjoy these as much as I do!
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
0:00 Lava Flow
2:26 Black base - glass -red resin
4:10 Layer 2 - LAVA
10:53 Layer 3 More LAVA
13:42 Layer 4 final - fill in with clear (This was done in the space of an hour because the clear was so deep)
17:07 sand and prep
18:12 Finished!
I am an Amazon associate, I receive commissions from the qualifying links to amazon listed below:
Base Layer: Basics Mars Black (base color): amzn.to/302qqHD
Red: amzn.to/3gBsMCr
Pinata alcohol ink “Chili Pepper Red”: amzn.to/2QtOXji
Broken Glass (I found mine at a craft store -used for putting in a vase as an accent)
amzn.to/2VO8b6m
Mixed with Black pinata alcohol ink: amzn.to/3lset6D
Red: amzn.to/3gBsMCr
Lava:
Brilliant Yellow (artist’s loft): amzn.to/2EJkqeA
Dr PH Martin’s Bright Red Ink (its really orange): amzn.to/2D51jeA
Pinata alcohol ink “Chili Pepper Red”: amzn.to/2QtOXji
Coaster molds: 5 inch: amzn.to/31S96X0
Typical Tools I use:
Hair Dryer (the brush tip is removable): amzn.to/3bp2kfh
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com/Variable-Tempe...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu
2:26 Black base - glass -red resin
4:10 Layer 2 - LAVA
10:53 Layer 3 More LAVA
13:42 Layer 4 final - fill in with clear (This was done in the space of an hour because the clear was so deep)
17:07 sand and prep
18:12 Finished!
Pro trick : watch movies at Kaldrostream. Me and my gf have been using it for watching all kinds of movies these days.
@Trenton Joziah Yea, been using kaldroStream for years myself =)
@Trenton Joziah Yup, have been watching on KaldroStream for years myself =)
@Trenton Joziah yea, been watching on KaldroStream for since december myself :D
@Trenton Joziah definitely, been using Kaldrostream for months myself :D
when I grow up, (I'm 63, so there's not much hope of that) I wanna be just like you!
LOL Yup me too:)
Oooh I don’t think I have watched this video of yours before.
I love your work. You have some of the more magical and unique resin art coasters.
Cooooolllll cooooolllll coooooolll, and the music is ❤❤❤❤..... i like it,i love it ❤
Your patience in your processes is impressive.
Thank you so much 🎉 you’re amazing ☯️☮️💛
I feel the heat.
WOW the detail, the layers, the technique! Fantastic
I'm addicted to your videos. You make it look so easy. It is certainly not. Only really good people can achieve this. Thank you for sharing the magic
These are gorgeous! Love everything you did here from the layering of colors to really see the yellow come thru to only using the black glitter on the jagged black rocks was perfect. I've been looking at a lot of lava resin things lately and I think you nailed it!
I'm gonna try this tonight into a hole in a log.
Got some LED in, some red glass rocks.
Thanks for the inspiration, hope that will work well :D
Spectacular colors! Beautiful pieces.
These are beautiful
Wow absolutely amazing ❤️🙏
Dang you did an excellent piece of work!
so cool! will definitely try this for a project
thank you for the great idea!
Brilliant
Great idea with the red ink.
This is simply beautiful.
Incredible.
i love your artwork!!
Nicely done
Beautiful
what an artist! Stunning results
Very lovely
Beautiful love it thx 😊
Du hast eine super Idee mit sehr viel Liebe zu der Arbeit .Alle Achtung 👍
Beautiful amazing...very creative
Awesome!!
🔥🔥🔥🔥🔥🥰🥰🥰 I’m speechless!!! This is real art!!!
They look so real think these are my favorite
I'm so glad I found your channel. Now, when I see anything from you, I jump on it. UA-cam screws up my notifications, so I might be late, but always happy to see a post from you. This is beautiful, and for certain, something I want to try! I have bought some raw, big mica chunks I'm going to try to flake out and dye, and I have gotten some broken mirror glass also just for the same process. YAY!
I might have to work in reverse with the molds I have, but I'm excited to try and use this technique to make dice and a dice rolling tray. Great tutorial!
Amazing 😱😍
Resin as You Wish- I love your videos, you are a true artist making beautiful coasters. Each is a mini work of art and I've learned much from you. However, I watch your videos to make myself better and am interested in what you do not that annoying music in the background. Too loud, and the same 4 lines over and over and over the whole video. Somehow I don't think these guys will ever make it into the music hall of fame so if you ditch it my feelings would not be hurt. I'm so looking forward to watching more of your amazing art!
Hi, I have two videos that have this song and the response is either "OMG i need this song who is the artist!" or "OMG PLEASE make it stop!" 😂😂 I have learned a lesson from this LOL! I am starting to re-do my videos and talking instead, I will get to this one soon - thank you for the feedback!
I really love ur creations 😍 Greetings from Mexico 🧡
Just finished my 1st Lava flow coasters,Thank you sooo much they will not be my Last . I have also been working on Fel Green Magic ready for 3rd layer Again …Thanks, your an Awesome Teacher 🍎
Hello! Well done! It is truly spectacular work! It seems to see the lava flow, as if it were real! 🤩🌟 Sabina
I am doing this one tonight. I bought the milkyway glitter you advised in your other video. I LOVE IT! It's my new play thing for tonight. I may try doing this and using that to give it a smoky look.
I love these sooo much, I have a FB page, and Instagram, post your results and tag me - I'd love to see them when you are done
For a while, I couldn't understand why you were applying the epoxy in that manner. About 3/4 of the way through, then I saw it. Amazing work & very time consuming.
Do you have a video showing your sand and prep? I struggle with hand sanding and would like to know how other's do this. Thank you for your tutorials and video's. You are an amazing artist ❤️
😯😯😯😯😯 magnificent
Beautyfull 👍👍❤🎉
So awesome 😁🤙 when you pour resin on the bottom at last, and you just drag your finger around the edge, doesn't it build up something under, on the front side?
رائع حقا
Love-love-love did I say LOVE! Your work!?! If not, I love your work!! 😊😂 Question: at what point do you add your signature? Is it before or after you sand?
I usually add it before the last layer - so it is inside the design. If I forget, I can add it on a sanded coaster right before I do the final clear coat. I forget a lot 😂
Thank you so much for responding. I always wondered how you did it 🤣 thank you for sharing that with us.
Christy you really make stunning pieces with colors that pop it’s really a beautiful look 😍 Again saw the watch out for bubbles 😉but there was glass still exposed so I thought and glass shards!😂did you add extra coat or did you sand it I’m confused because I have done this where I have a shell or glass or something still popping out but I’ve had to cover with resin so do tell me how you covered or eliminated it because the sand and prep was perfect no holes or glass exposed without resin. 😳Also the bottoms were there open spots because there wasn’t a base to start? I have done this with sand and shells and I have also done with glass like but bottom of coaster when pulled out there were little open holes where there was no resin but instead either glass or shell or whatever I used 🤣 it didn’t really matter because it was bottom and I covered it but just curious 🤓 Anyway clever you another Beauty 👏🏻👏🏻💋👍🤩
Caron Stone since the glass was the base coat you can see through the coaster in tiny spots - you are right I can just add a bottom and it’s just that easy. Only one of the two coasters ended up with a piece of glass above the resin, since I do my sanding with a dremel it is easy to level - it is noticeable when you hit a shard compared to the resin but the dremel didn’t seem concerned about it and buzzed away. When I built my little canyon I kept checking to see the glass wasn’t stacked higher than the coaster -so I was pretty close👍 one of my favorite things about resin is that if you try hard enough everything can be inside in its own little world - I don’t like protruding things, not because of how they look, but because of how things like that collect dust and become hard to wipe off. thank you for your kind words!
Resin As You Wish yes I too use the dremel since I learned from you!💋 but I guess since yours always seem perfect I didn’t realize it didn’t matter I agree about the sticking out things I don’t like the look I like the whole in a little resin bubble that you create but thanks for the answers I guess it’s trial and error more errors in my art room though 😬😘
❤❤❤
Love your work, I just started making coasters, what and paper do you use?
Hi, Here is a video with all my sanding info and links in the comments :-)
i love your videos, you are an inspiration.
i have a question..... whenever you mix colors in the layers, it seems like your resin is thick? do you wait for 30-40 min n let the resin become thick or the resin you use is thick or it just looks like to me? plz do answer.
I am using MiraKleer brand resin, it is thick, but I have used resin that it thicker and a couple that are really thin. In the video, I did not wait to use the resin, I used it as soon as it was mixed.
Resin As You Wish thanks a lot for your reply
I saw one of the pink coaster on your webpage for sale , plz make tutorial on that if possible . Thanks a ton for your tutorials,🙏
Hey there! Thx for a nice and wellmade tutorial :) I was wondering why u sand before applying the final coat? Is it to have no sharp edges?
Hoping for an answer :)
Sincerely
Sanding gives the top coat of resin something to adhere to really well, making a stronger bond
Gorgeous. Can I do this on a tray that will be flipped over?
Give it a try and tell us how it goes 👍
Почему так мало лайков 👍👍👍
Where did you get that spoon that you spread the glitter with???! They look beautiful!!
Jaime Cowan Hi, it’s a little set of glitter scoops by “recollections” that I got from Michaels craft store, it was a pack of 3, I can’t find them in their online store but they are hanging in the glitter section, this is similar but there is only one: www.amazon.com/Martha-Stewart-Glitter-Scoop-Brush/dp/B083W46JNF
Sorry for the late reply… is there a certain application for the ink vs mica powers? I’ve been experimenting with both but would appreciate some other input. Thank you!
Je ne comprends pas très bien l'anglais
Pourriez vous me dire ce que vous avez fabriqué
Quel usage
MAIS C'ES SUPERBE ET J'ADORE LES COULEURS
BEST REGARDS
When you sand do you only sand too then mask off bottom before adding final coat?
I only sand the top and tape off the bottom :-)
Thank you for answering questions, this helped me a lot . New to your posts but I did subscribe of course! Beautiful work!
@ 1:58 i see jesus...with a top hat
What is the mix called it’s amazing
Would this be possible with glow in the dark resins (yellow and orange) in combination with the alcohol ink?
yes, as long as the glow colors are high quality. I have found that glow powders aren't always vibrant and this makes it harder to see a glow result, especially ifyou are going to be adding others colors on top of them. here is an example: www.pinterest.com/pin/473300242092458660/
Ok, thanks! I'm hoping to start a new project soon, and this info and your awesome tutorial help alot! If the result is worth showing, i'll send you a link :)
Is the acrylic paint by itself or mixed with resin ?
it is mixed in the resin :-)
I hate to bother you but I have no one to ask. I use liquitex ink can I add alcohol to it to make alcohol ink? Sorry if it sounds stupid.. Thank you in advance..
Well I will say you can mix alcohol into acrylic colors, always use 90% or higher alcohol, but whenever I’ve seen this it has been adding alcohol to paint on a canvas - the way it blooms out is super pretty, alcohol affects inks drastically but I have never mixed an acrylic with alcohol with the intent to create alcohol inks to use in resin, I have mixed alcohol with mica powders but it’s better to say, they don’t really mix, instead they react to each other and create amazing effects. I did find this tho: feltmagnet.com/crafts/DIY-Craft-Supplies-Make-Your-Own-Alcohol-Inks
I don't know the answer for certain, but why not try it? just a tiny bit of the ink into alcohol (use high percentage alcohol....like 90% or more) I'd be interested in hearing your results! They say that powdered pigments can be used in alcohol to make alcohol ink, so that's why I answered. I'm interested!
Can you light this from bottom
What version of the song Make Dem is this?? 🥰
I'm sorry I went looking for it, but I can't find it. I use a program with Stock Music, the artists that sell permissions take songs and add to them (extend solos etc) so you aren't looping a 2 minute song. I did talk to the program folks a while back and they have it fixed for me to see the song from now on, but only those since I asked them to fix it . I haven't found this one again and there are hundreds to go through
Can you backlight these
Can you make fallen star sky?
itsmeerica what a lovely idea! ❤️ it’s on my list
Great job....bit that mind numbing repetitive music is horrid. I had to turn it off
Thanks, I am starting ditch the music and talk durin g videos, this leaves a year of all music videos on my channel. I will re-do this one at some point, thank you for the feedback