Tecumseh Mower - Chinese Carburetor Install
Вставка
- Опубліковано 25 бер 2015
- Decided to try one of these out, works ok for the money I guess.
Cylinder air filter 35066
amzn.to/2MgSnUp
Oval
amzn.to/2MlQwgZ
Primer Bulb 40-085
amzn.to/2AtnCc5
Carburetor (Chinese Aftermarket all that is available)
amzn.to/2Apk8HS
I am a participant in the amazon affiliate program.
Disclaimer:
Due to factors beyond the control of Hank's Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Hank's Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Hank's Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Hank's Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Hank's Garage. - Навчання та стиль
I got a Chinese pwk knock off for a tuned two stroke bike. Lovely bit of kit runs sweet and cost £12 compared to£175 for original
Looks like an 80's model, like the one I had back then.
same mower as the red one i did only mines a 4hp briggs , nice first pull power
First time I saw green gas, I told my dad it was antifreeze. He said no its really old gas.
Sooo good just i want to do !!! Where u find gasket Motor parts ?
Hank
Did you ever get this engine running correctly, or better and if so, what more did you have to do to the engine?
I am having sort of a similar problem with a 4.5 HP Tecumseh on a Craftsman Eager-1
how come no one shows the linkage hook up. I replaced my carb and forgot how the linkage went.
Yes this is a pain linkage can be hard to do if you can't remember always take photos first I find is best
dude you may have just solved my problem...i didnt remove that red hose form my carberator i left it on maybe thats why my filter isnt getting fuel to start...dont laugh i just took this hobby up at the wend of last year
I had almost the same exact mower, actually kinda funny the woman who used to own the house I live in now threw it out almost 10 years ago, i took it home gassed it up and it worked fine, so I gave it to my Dad, every spring I'd have to fix something, The fuel line collapsed on the inside restricting gas, the primer bulb dissolved, the safety cut off messed up so I bypassed it, making a wired cut off switch, the carb float got a hole so I replaced it, it didnt have an air filter and it tended to burbble oil from that o ring till I secured the pipe better, but other than that it was used and abused, until last year, Dad was having a hard time starting it so instead of fixing it I gave him my mothers old mower she no longer needed(also from the trash)and brought it home, i found it would run fine after you "primed" the carb with some gas so I used it as my shit mower all summer (for mowing rocky areas etc) then gave it away, it still works and the kid i gave it to will be using it this year to mow lawns, once the snow melts I'll do a vid on the honda mower i have at my moms, it was a barn find, with out a pull cord handle(just a knot in the cord) and a 6-8 inch pull it started almost everytime even after being outside all winter, cant wait till this snow melts and i can do some mower vids myself
Sounds like a beater mower for sure holy shit lol. Ya can't wait to see those vids man.
hanksranger dunno if i ever said this before but i cant wait to be eaten aliveby mosquitos
Lol i'm so glad we don't have much of a problem with those here
hanksranger they are annoying but no biggy id say black widows are way worse, we are lucky that the most poisonous insect here is a daddy long legs spider
ghettohillbilly1 def got the widows around here though, dont got no time for those cocksuckers
timing is off, I'd check the key between the shaft and the flywheel. It might be sheared some.
Hope you are still following this video. At about the 5 min. mark, you put a cap on the crankcase breather hose port. There is usually a hose that attaches to that port and goes into the crankcase as I understand it. I guess you don't think that it is necessary or maybe that older mower didn't come with one in the first place. I just picked up a mower where the port is broken so a hose won't attach but it could be plugged. So my question is: in your experience, do you think that the port/hose is necessary for the proper running of the engine?
on lawn mower I got, the fuel hose from fuel tank is connected there and gas just pours out of air filter. Maybe this was the problem...
Do you have a manual for it ? My dad had the same one in the garage and I am trying to rebuild it .
the seal on the air box is actually an square ring, not an 0-ring :)
You don't have to replace the dipstick oring. Just loosen the screw on the shroud that holds the dipstick, put downward pressure on the dipstick, and tighten the screw back to the shroud. That should fix your leak.
On the carbs that use the red straw; do not operate the engine without.
Cut it down the to fit your air box if you need to, but do not remove the tube. It will cause problems. Apparently there needs to be a pressure differential between the venturi and the inside of the red tube.
suchfunstuff thanks for the tips bud, honestly tecumseh mowers are a rarity, I hardly ever get them in.
I know its kinda late but i found this out today.Sometimes you have to pull off that black plastic cap on the carb and adjust that jet for a smoother engine.
That's not an adjustment, it's a removable jet orifice for the idle (when the carburetor is not drawing fuel through the power jet). I usually open them up a bit, but you need a fairly thin wire to get through the tiny opening in the small brass piece.
suchfunstuff I just gave mine a couple turns out and it runs much better.
I know what you mean. That's because when you loosen it away from its seat in the carb, you're allowing a space for fuel to bypass the fixed size hole. There's no spring behind the screw, so it might not stay in place (you don't want it to fall out while mowing).
Looks like a nice mower, If you don't mind me asking... What did that Chinese Tecumseh carb cost you?
Alan Marshall It was 15 bucks or so... I went to go start this one the next day and now its surging might be the carb got something in it, Ill have to pursue it some more.
hanksranger Thanks, those Tecumseh's can be problematic.
Alan Marshall I know this is an old post, bit it may be beneficial for future inquiris. The Chinese knock offs are prone to leak in that the bowl dowel will not seal and restrict fuel from the tank from overflowing and leaking through filter. These carbs are good because they are cheap, and in this case good enough to sell so it will be someone else's problem. I used one on a Tecumseh 7hp and had leaking a month after installing, and with minimal use.
25BEDFORD Thanks for the info
25BEDFORD
What is a "Bowl dowel?"
I am too honest to be a salesman. If something was wrong with anything that I am selling, I feel compelled to tell the potential buyer everything that I know about the item that I am selling.
I tell them what is bad, going to go bad, as in it is beat up but has some time left, and I give a heads up on what's getting ready to go bad
If I had to sell stuff to feed my family, we would all have starved to death quite a few years ago and I don't dicker or haggle over new items.
A few of the local car salesman have found out that I don't dicker or haggle when I have asked the salesman for the best price they he/she can do.
When I know that they didn't give me a good price or even try, I stand up and walk out and I know that I can do better somewhere else haaa
5:00 you installed a cap. Is that fuel intake?
i tear all of mine down to the block and clean the head,piston,valves...if you use a razor blade you can reuse the head gasket
Some of those knockoff Tecumseh carbs have really bad reviews on Amazon. I found one that had good reviews and it was only $11.01 so I got 4 of them, still waiting on them in the mail. If they work well, I'll order up some more and keep them on hand. $10 for a brand new carb saves you the time of having to clean the old one out and then having a new carburetor is also a selling point when listing the mower. When a brand new carb is $10, it's hard to justify taking the time to rebuild the old one.
Looks like it’s trying to run on green tea or swamp fuel
I am installing the same carburator and the linkage is holding the butterfly valve completely open when cold. Is this ok, or possibly installed incorrectly?
yes it is normal to be completely open the primer takes the place of the choke via raw fuel dribbling out the red hose into the throat of the carb when you push the primer
Most important info, carb identification on the carb inlet flange . Search and get zero results
Ha. That mower is about 30 years old.
Like mine.
come mai hai messo un carburatore cinese su un tecumseh?
Do I look like I speak italian?
@@hanksgarage_ no, but there is a google translator.
English m...f...!
@@MH-WM why did you put a chinese carburetor on a tecumseh?