This may sound really crazy but here it goes. As far as grip size....why don’t these tools companies with unlimited budgets design a grip with various size back strap grips like some pistols ? I know it wouldn’t change the ergonomics much however it might just be enough to make a the difference in a certain tool.....just thinking out loud.
i love that Hitachi as an auto body guy, it's awesome, don't need to hook it up to a compressor and has tons of power what more could you ask for finally Hitachi has cordless impact wrench thats awesome.
Looks like a great tool. Milwaukee fan here and own impact wrench models (High/Mid/Stubby). I have only needed the high torque once. I was so glad I owned it though or my project would have been stopped while vehicle was taken apart. Helps to have mega power with long extensions and swivel sockets. This HPT model is a no brainer for construction like you mentioned. Lifetime warranty is a great thing to have as well.
In the end of the video @12:25 you said that you were going to ship WR36Da to a construction job and review again after 6-8 months of use. It has been almost 2 years. Just wondering if you had sent it? I couldn't see any other video about this bad boy on your channel.
tough to beat the lifetime tool warranty and ip56 rating. I have the Milwaukee wrench it does have awesome power, but Ive sent it out for service twice and both times a new one has come back But eventually the Milwaukee warranty will run out.
Having been a field service mechanic on heavy equipment that ip rating makes a big difference. Though a shop rat might not care but I've seen plenty of guys soak their impact in antifreeze or oil pulling out a component. Also I think you might have just demonstrated that some of these companies numbers on torque are b.s.
Yeah, for two guys who have one banner on the wall and claim IR to have the best Impact Wrench on the market, the Milwaukee banners should speak words. You have a banner? we will cover our OSB with it!
@@WorkshopAddict One banner, a set of some Milwaukee fuel 12 volt in camera view, Milwaukee tool box in view. I am a Milwaukee fan by the way, thats why I clicked on the video. Years ago, Hitachi used to make motors for many of the other tool companies, (and they still may) one was Hilti. It seems though after watching your videos you are biased toward Milwaukee. As far as banners go, it would be a BBQ banner.
We are down for a BBQ banner. Working on an American Flag and some Corvette stuff. I will say that I like Milwaukee stuff. The tool boxes are affordable and nicer than others on the market in that price range. What you see behind us is stuff sitting out from projects. We use our tools. So, do we hate on Hitachi? I don't think so. If a tool is heavy and does not fit my hand, it will not be used by me much. We work very hard to be honest. We do not take on paying contracts that would force us to be biased or also go shopping at places to get paid. We tell you what we think and if we like Milwaukee tools most of the time, I guess they must be doing something right.
Another point is that a 36v system will only draw half the current for the same amount of power, less current means less heat. I'd be interested to see an endurance test between 18v and 36v models and see how hot the tools and batteries get
Metabo Might be able to get some decent sales with the weather proofing and lifetime warranty. I have IR Air tools and love them, but I went with Milwaukee just due to the incredible array of tools they have available, they’re really all in on battery powered stuff and pushing r&d. I fix buses and Some of my battery powered stuff comes up a little short, and I’m hoping the 1 inch Milwaukee will do the trick when it comes out
I am quite certain that the Metabo HPT MultiVolt AC/DC Power Cord can be used on ALL the Metabo HPT 18V power tools, as well, since the 36V Metabo batteries CAN also be used on the 18V tools, doubling the Amp hours on the 18V tools! And with the Lifetime Warranty on the tools, what is NOT to like about Metabo?? I love all my Metabo 18 and 36V tools!
Our Lowe's has a full line if the metabo 36v dual Voltage tools... very expensive without any real benefit . ...with the AC attached, that box is just in the way except on the mitre saw....great video, love the channel 👍 ...I'll stick with IR for the shop.
Enjoyed your video. I find it fun to see how my brand (i.e., Milwaukee) holds up against the competition. Liked Donny's comment on grips also, especially in these price ranges. But you have to go out and check them out as you said before buying.
Tough call. Personally, I have used all my tools in the pouring rain without issue. They do get brought back inside and allowed to dry. If you work where they could not come in and dry, it might work, but it is a big gun for that stuff.
@@WorkshopAddict In England where it rains A Lot xD, quite a few farmers buy this tool and use it for everything like putting up steels sheds, to taking bolts off a filthy piece of machinery in the rain. The water and dust proof factor is a big selling point. I know, cus i am a farmer xD, already broke a different brand using it outside in the rain.
Very nice. Liked it very much. What about six months review? Also AEG (Ridgid in US) 1/2 500Nm brushless would be nice to se compared to Metabo ssw400 or to Dewalt 500Nm impact or Milwaukee 610 Nm Regards
This tools are great for iron work, countless dewalt and milwauke have been lost due to the sudden rain. We can't always run to hide the tools. Or we gotta tighten the perlins and that 20 chance of rain decides to hit. Their tools are definitely more gear towards construction
I'm a steel erector and I don't rate Metabo I be had 6 of their rattle guns all have been returned for faults ,anvil broken,trigger ,the last 3/4 drive lasted 6 weeks before dying!
A huge question about MV is patent right infringement. The genius is in the voltage splitting not voltage it self . This is a concern because they can be ordered to stop manufacturing by dewalt leaving a customer stranded. Similar has already happened to Bosch and snap on.
I looked but couldn't find much about any patent issue with the Hikoki (I'm in Australia) multivolt system, do you have any links? Switching between 18v and 36v would be simple, you'd just have a solid state relay or similar that switches to make the 2x 18v banks in series for 36v or parallel for 18v
I looked after I said that and I seen one with a friction ring and pin detent, not sure why both but I know the pin detent shave to be released buy using a tool to push the pin in so you cont drop a socket from up on the iron
Nut busting torque isn’t real world? As in it doesn’t actually break loose bolts at that torque spec? Or even close? I didn’t realize that. Also I’d made a comment expressing disappointment that none of the 36V tools from anyone that I’ve found yet, Metabo HPT or Makita (actually I don’t think they have a 36v in the driver/wrench area because they’re using a two battery approach) there’s someone I’m missing. Bosch maybe, anyway none of them seem even as powerful as the gen 3 Milwaukee driver. Haven’t looked too deep into the wrenches yet. I believe you told me I was wrong and to check the Metabo HPT, maybe the driver is the exception? Or am I missing a video ? I swear it seems like the rigid is the only driver that beats gen 3 fuel anywhere, even if only on paper. If I’m missing out and you have a link or model number I’d greatly appreciate it
I am a steel erector and I would not buy another Metabo impact gun .I have have had about 6 of their tools and they don't hack it.The last one a 3/4 drive died after 6 weeks cost 500$ for the skin.They used to be the best tool money could buy not anymore!.
goal zero yeti 6000x lithium portable power station 6 Yeti Tank Expansion Batteries 200W solar 3 plants goal zero 15.08 Kw test it out Running whole house
@@vkturbo7676 Koki Holding bought both Metabo and Hitachi Power Tools brands. Hitachi didn't sell them the name (Hitachi still makes other stuff). So in Europe they changed Hitachi to HiKoki and in the US Metabo HPT (Hitachi Power Tools). Metabo (without HPT) is still the Metabo line of tools of old (professional line).
@@vkturbo7676 yep, I just did a bunch of research cause I was in the market after both my Ryobi drills burned up. Decide to upgrade a bit with the Metabo HPTs. Milwaukee was in the running as well, but Lowes is closer than Home Depot by about 20 miles, lol.
*Good **MyBest.Tools** value compaired to other brands*
This may sound really crazy but here it goes. As far as grip size....why don’t these tools companies with unlimited budgets design a grip with various size back strap grips like some pistols ? I know it wouldn’t change the ergonomics much however it might just be enough to make a the difference in a certain tool.....just thinking out loud.
fully agree. Give us something that is adjustable because we are not the same.
Metabo gets it done in the construction world it tears bolts apart on exchangers and pipe
i love that Hitachi as an auto body guy, it's awesome, don't need to hook it up to a compressor and has tons of power what more could you ask for finally Hitachi has cordless impact wrench thats awesome.
Motabo all the way. Also Hitachi and hikoki my old Hitachi inpact driver still slams Milwaukee on every job. Now I have the Hitachi tripple hammer .
I’ve killed two IR brushes hi torque impacts in the water works field. this might be a good tool for us.!
Hell yeah broke out the big boys... Setup in the large socket rig didn't change a whole lot.... all comparable in my view.... Thanks fellas. ..👍
Looks like a great tool. Milwaukee fan here and own impact wrench models (High/Mid/Stubby). I have only needed the high torque once. I was so glad I owned it though or my project would have been stopped while vehicle was taken apart. Helps to have mega power with long extensions and swivel sockets. This HPT model is a no brainer for construction like you mentioned. Lifetime warranty is a great thing to have as well.
In the end of the video @12:25 you said that you were going to ship WR36Da to a construction job and review again after 6-8 months of use. It has been almost 2 years. Just wondering if you had sent it? I couldn't see any other video about this bad boy on your channel.
Bryan, I have Makita, and Mac tools impact gun... but IP56 is making me consider it since I do some automotive work on my backyard
tough to beat the lifetime tool warranty and ip56 rating. I have the Milwaukee wrench it does have awesome power, but Ive sent it out for service twice and both times a new one has come back But eventually the Milwaukee warranty will run out.
I thought metabo only had a 3 year warranty
Lifetime for the Metabo HPT, customer service is killer too
@Mike Studmuffin it means until they no longer have the parts to repair it. Even then, they may replace it
Bought one, Lowe’s didn’t have batteries for it though so waiting for my 36v cord to come in..
Having been a field service mechanic on heavy equipment that ip rating makes a big difference. Though a shop rat might not care but I've seen plenty of guys soak their impact in antifreeze or oil pulling out a component. Also I think you might have just demonstrated that some of these companies numbers on torque are b.s.
Hard not to see the bias with all the Milwaukee banners and stuff around.
Yeah, for two guys who have one banner on the wall and claim IR to have the best Impact Wrench on the market, the Milwaukee banners should speak words. You have a banner? we will cover our OSB with it!
@@WorkshopAddict One banner, a set of some Milwaukee fuel 12 volt in camera view, Milwaukee tool box in view. I am a Milwaukee fan by the way, thats why I clicked on the video. Years ago, Hitachi used to make motors for many of the other tool companies, (and they still may) one was Hilti. It seems though after watching your videos you are biased toward Milwaukee. As far as banners go, it would be a BBQ banner.
We are down for a BBQ banner. Working on an American Flag and some Corvette stuff. I will say that I like Milwaukee stuff. The tool boxes are affordable and nicer than others on the market in that price range. What you see behind us is stuff sitting out from projects. We use our tools. So, do we hate on Hitachi? I don't think so. If a tool is heavy and does not fit my hand, it will not be used by me much. We work very hard to be honest. We do not take on paying contracts that would force us to be biased or also go shopping at places to get paid. We tell you what we think and if we like Milwaukee tools most of the time, I guess they must be doing something right.
Another point is that a 36v system will only draw half the current for the same amount of power, less current means less heat. I'd be interested to see an endurance test between 18v and 36v models and see how hot the tools and batteries get
Metabo grinders are nice and dependable
I have many Hitachi tools for many years and dewalt tools too , like Hitachi better , more power even on a 1.5 ah vs a 2.0 ah
hitachi is like toyota, it lasts
Metabo Might be able to get some decent sales with the weather proofing and lifetime warranty. I have IR Air tools and love them, but I went with Milwaukee just due to the incredible array of tools they have available, they’re really all in on battery powered stuff and pushing r&d. I fix buses and Some of my battery powered stuff comes up a little short, and I’m hoping the 1 inch Milwaukee will do the trick when it comes out
We cannot wait for the 1" Milwaukee M18 FUEL Impact Wrench!
I am quite certain that the Metabo HPT MultiVolt AC/DC Power Cord can be used on ALL the Metabo HPT 18V power tools, as well, since the 36V Metabo batteries CAN also be used on the 18V tools, doubling the Amp hours on the 18V tools! And with the Lifetime Warranty on the tools, what is NOT to like about Metabo?? I love all my Metabo 18 and 36V tools!
Our Lowe's has a full line if the metabo 36v dual Voltage tools... very expensive without any real benefit . ...with the AC attached, that box is just in the way except on the mitre saw....great video, love the channel 👍
...I'll stick with IR for the shop.
For Auto work, the IR stuff rocks.
Awesome 👍 video guys.. very thorough and thought out.. appreciate your honesty
Thanks shakee
@@WorkshopAddict no prob..you guys do a awesome job on your channel.. very much appreciate all the time you guys put into your videos.. thanks
That is a HUGE compliment. We appreciate that!
Enjoyed your video. I find it fun to see how my brand (i.e., Milwaukee) holds up against the competition. Liked Donny's comment on grips also, especially in these price ranges. But you have to go out and check them out as you said before buying.
Thanks JJ
What about the guys who has to go on a service call somebody's cars has a flat bad weather I think it would be great can I hear your opinion
Tough call. Personally, I have used all my tools in the pouring rain without issue. They do get brought back inside and allowed to dry. If you work where they could not come in and dry, it might work, but it is a big gun for that stuff.
@@WorkshopAddict In England where it rains A Lot xD, quite a few farmers buy this tool and use it for everything like putting up steels sheds, to taking bolts off a filthy piece of machinery in the rain. The water and dust proof factor is a big selling point. I know, cus i am a farmer xD, already broke a different brand using it outside in the rain.
I just had a Milwaukee die from getting wet in the rain
I have Ingersoll rand super strong but too heavy I wish if they make the same power but less weight
Another great video keep it. Up👍
Thanks Bud
At the end of the day they will all get the job done, but the IR is the superior impact gun in my opinion.👍🏼
We love our IR stuff.
Any price comparison...although for me, price isn't everything but sometimes does make me go for it
the Metabo HPT is $449 bare tool.
@@WorkshopAddict ...thanks
Very nice. Liked it very much.
What about six months review?
Also AEG (Ridgid in US) 1/2 500Nm brushless would be nice to se compared to Metabo ssw400 or to Dewalt 500Nm impact or Milwaukee 610 Nm
Regards
This tools are great for iron work, countless dewalt and milwauke have been lost due to the sudden rain. We can't always run to hide the tools. Or we gotta tighten the perlins and that 20 chance of rain decides to hit. Their tools are definitely more gear towards construction
I'm a steel erector and I don't rate Metabo I be had 6 of their rattle guns all have been returned for faults ,anvil broken,trigger ,the last 3/4 drive lasted 6 weeks before dying!
Need to do a video ingersoll rand 7152 vs Milwaukee 2864. Since they’re break away torque are the same
*their
We did already.
Oh thought it was the 1/2 in Milwaukee
Like the water protection and lifetime warranty otherwise not abig fan
Great minds think alike.
A huge question about MV is patent right infringement. The genius is in the voltage splitting not voltage it self . This is a concern because they can be ordered to stop manufacturing by dewalt leaving a customer stranded. Similar has already happened to Bosch and snap on.
Great question. We have not be told of any law suites.
I looked but couldn't find much about any patent issue with the Hikoki (I'm in Australia) multivolt system, do you have any links? Switching between 18v and 36v would be simple, you'd just have a solid state relay or similar that switches to make the 2x 18v banks in series for 36v or parallel for 18v
Do they offer a pin detent model, if not an iron worker couldn’t use it
They do show a model in the owners manual with a pin detent, but we could not find it online.
I looked after I said that and I seen one with a friction ring and pin detent, not sure why both but I know the pin detent shave to be released buy using a tool to push the pin in so you cont drop a socket from up on the iron
Very nice
What do you always tell people not to do? As far as tightening with the impacts ?
Lifetime warranty tranferable?
I believe so.
@@WorkshopAddict No
GREATEST THING SINCE SLICED BREAD..AAAA+
Nut busting torque isn’t real world? As in it doesn’t actually break loose bolts at that torque spec? Or even close? I didn’t realize that.
Also I’d made a comment expressing disappointment that none of the 36V tools from anyone that I’ve found yet, Metabo HPT or Makita (actually I don’t think they have a 36v in the driver/wrench area because they’re using a two battery approach) there’s someone I’m missing. Bosch maybe, anyway none of them seem even as powerful as the gen 3 Milwaukee driver. Haven’t looked too deep into the wrenches yet. I believe you told me I was wrong and to check the Metabo HPT, maybe the driver is the exception? Or am I missing a video ? I swear it seems like the rigid is the only driver that beats gen 3 fuel anywhere, even if only on paper. If I’m missing out and you have a link or model number I’d greatly appreciate it
Its fantastic its real close to the makita more whiners about weight
Next video battle them against each other
You're probably just rounding off the corners which is why the tape moved.
LOL. The socket was fine. That is a serious nut and I bet one could use a few sizes too large of a socket and not round it off.
@@WorkshopAddict heh, serious nut
I am a steel erector and I would not buy another Metabo impact gun .I have have had about 6 of their tools and they don't hack it.The last one a 3/4 drive died after 6 weeks cost 500$ for the skin.They used to be the best tool money could buy not anymore!.
This looks oddly similar to the new 40v Makita Impact wrench.
goal zero yeti 6000x lithium portable power station 6 Yeti Tank Expansion Batteries 200W solar 3 plants goal zero 15.08 Kw test it out
Running whole house
Why the hell has metabo changed their colour to look like a hitachi/hikoki?
Those two companies are now the same. The HPT line is the Hitachi tools.
@@WorkshopAddict ok cheers for that, just thoight it was odd but now I know why. Cheers for replying.
@@vkturbo7676 Koki Holding bought both Metabo and Hitachi Power Tools brands. Hitachi didn't sell them the name (Hitachi still makes other stuff). So in Europe they changed Hitachi to HiKoki and in the US Metabo HPT (Hitachi Power Tools). Metabo (without HPT) is still the Metabo line of tools of old (professional line).
@@russianwolf1972 hikoki here in Aus as well, haven't heard of metabo hpt. Interesting info cheers
@@vkturbo7676 yep, I just did a bunch of research cause I was in the market after both my Ryobi drills burned up. Decide to upgrade a bit with the Metabo HPTs. Milwaukee was in the running as well, but Lowes is closer than Home Depot by about 20 miles, lol.
Again with the bias milwaukee fan boy.
On torque test channel this beat the milwaukee.
Guys just say it, it's nothing special just another impact wrench with IP rating...I still don't see why they marketing those metabo-hitachi tools
For someone, that IP rating means a lot.
MOOOOOOOOOORRRRRREE please
The other two are not enough stronger to make a difference
It's just Hitachi...
Yup!
Hitachi brought metabo for the battery and motor technology. Then they made these
Auto guy use air more then not so it makes sense
Milwaukee all day long
Milwaukee is better in opinion
Would never buy China-Mullwalki not even an American company just a name they bought...
Mec Alpsha yet enjoying your electronic devices. 👍
All the pieces of DeWalt is made in China but just Assembled in USA
DeWalt Marketing is confusing the dummies lol smh
@Jason H maybe for the international market. My metabo HPT tools sold in the US are made in China.