I would like this for boarding a ceiling, I’d run two one without the attachment, use the collated screws to tack it so I don’t have to hold it then switch to the other drill and hand load the rest.
Love this tool myself. I can chai. Out 50 screws in the time it takes me to do 5 by hand. Worth it and great demonstration. Also all the comments are shit. People trying to be relavent. Keep on grindin
Have you used a collated screws before. They may be a bit more expensive but they save so much time and I think make the job a bit easier. This is the Dewalt version, other manufacturers make them but I'm a yellow and black guy.
@@mountaintopremodeling if you think screws every 2ft is enough, then u crack on! Doesn’t matter if a board is 2ft X2ft or 8ft X 8ft that is not enough screws. Screw every 6-8 “ is correct where I come from. Rough work is all I see here. All the gear and no idea!
@@user-et1rb1px4mcode is every 16” with glue and every 12” without glue. That’s straight out of the irc 2015 code book silly goose. You’re putting way too many screws
Do yourself a favor next time, and screw into the bottom plate for the lowest screw. Always gets covered by base in that case. Only need 3 screws in a set for this sheet, bottom plate, in the field, and in the flat.
Having a hard time finding new bits for them. Do you have a link?
DeWalt drill and Milwaukee gloves 🫢
Yeah I'm kind of a rebel haha
Those gloves are hard to beat at 7 bucks. They offer good control and grip and are easy to replace.
@@richardmoore609 I always get them during their holiday sales at Home Depot, get them for dummy cheep
He swings both ways 🤭
How is that strange. You people are so damn weird.
Enjoy the shoulder replacement Fri the awkward double push on the auto feeders
Nice job. About to redo my bathroom and need something like this.
I would like this for boarding a ceiling, I’d run two one without the attachment, use the collated screws to tack it so I don’t have to hold it then switch to the other drill and hand load the rest.
Love this tool myself. I can chai. Out 50 screws in the time it takes me to do 5 by hand. Worth it and great demonstration.
Also all the comments are shit. People trying to be relavent. Keep on grindin
You really cant beat these things on price especially compared with Hilti.
Nice to see you miss as many as I do.
Love it
Grab your tool correctly please, it's not a regular screw driver
Can this be used on tin roofs
I wouldn't recommend it because the drywall screw would likely rust and they also don't have the rubber gasket on them to keep water out
I can still do this faster putting in screws by hand
Trust me bro, she doesn’t read these comments. Just text her
I can as well auto feeders cause injuries
Qual nome da ferramenta completa ?
What’s with the last screw?? Just high enough so tapers still have to mud but not low enough to where baseboard covers….My ocd is off the charts
I did that one just for you
Have you used a collated screws before. They may be a bit more expensive but they save so much time and I think make the job a bit easier. This is the Dewalt version, other manufacturers make them but I'm a yellow and black guy.
Any link for purchasing?
@@cielocontractservices7105 I actually have it linked in the description and it will take you right to it
Amen brother
Sabe nome ou link pra compra essa ferramenta?
5th screw missed the stud.
Thanks for pointing out the obvious, nobody could tell
No shit. That’s why he put a second one in 🤦🏻♂️
Sonho de todo gesseiro, pena que o custo no Brasil é mais da metade do salário mensal 😢💔
I can do it faster with just the gun 😂
So this is the gun you have to sit and listen to motor run all day?
That’s the one 😂 I only hold the trigger when I’m getting ready to put a screw in though
@@mountaintopremodeling yeah I've heard it's good you just have to listen to the motor. The Milwaukee and Makita have the battery saving mode.
I screw faster by hand
I’m sure you do
Não compensa
Please put more screws in that board. U have the tool to do it so do it properly.
It’s a 2’ rip. It doesn’t need more screws than that 😂😂
@@mountaintopremodeling if you think screws every 2ft is enough, then u crack on! Doesn’t matter if a board is 2ft X2ft or 8ft X 8ft that is not enough screws. Screw every 6-8 “ is correct where I come from. Rough work is all I see here. All the gear and no idea!
@@user-et1rb1px4mcode is every 16” with glue and every 12” without glue. That’s straight out of the irc 2015 code book silly goose. You’re putting way too many screws
That's so slow
Alright bud 😂
@@mountaintopremodeling I think it's faster without the adapter .
그립이 잘못됐다.
Absolute worst gun ever Hilti sd4500 and auto feeders make it so ANYONE can do it lame
Why so much hate? That’s pretty lame honestly. I like this tool and a lot of other do too. Lame
Out of all the jobsites I’ve worked, this gun is most common. Been running one now for a while. It’s tip top.
@@north637 We've actually upgraded to the newer dewalt attachment and it is far better than the one I have in the video
Stop whining man
o aparatı ismi nedir üstadım
Do yourself a favor next time, and screw into the bottom plate for the lowest screw. Always gets covered by base in that case. Only need 3 screws in a set for this sheet, bottom plate, in the field, and in the flat.
This video was taken over 3 years ago. Our methods have changed. We use glue. No need for a screw in the field
Even better.
@@harv6803😂 ya do yourself a favor and shut up there bud