Installing Mishimoto Oil Cooler on G35 !
Вставка
- Опубліковано 2 лип 2024
- Installing Mishimoto Oil Cooler on G35 ! 2021
Today I will be showing you guys how I installed my Mishimoto Oil Cooler on my G35. Hopefully you guys find this video helpful!
USE “BD10” for 10% off
USE "BD20" for 20% off on the HID to LED Conversion Kit for Nissan / Infiniti
Need the BEST AUTO Lighting: lddy.no/oksu
BEDISTINCT CLOTHING: www.bedistinctclothing.com
Connect and Subscribe to my social medias @BeDistinct:
/ bedistinct
/ bedistinct_
email: freemefromschool22@gmail.com - Авто та транспорт
Honeycomb Side Splitter next video 👌🏽, thank y’all for the support homies 🙏
Can u give us the link
I tagged you on ez splitters honeycomb side splitters when I saw them post it and immediately thought of you
@@alexissantos4187 www.mishimoto.com/03-09-nissan-350z-03-07-infiniti-g35-coupe-oil-cooler-kit.html?gclid=Cj0KCQjw4cOEBhDMARIsAA3XDRhuPWcZM7dath-jZNrqu67r48OxUsID-va3VSkOlQTjAFvNhN0Q9VUaArzuEALw_wcB
Thanks man! 😄
Looks stupid clean with that bumper 🔥🔥
Thank you hermano ✊🏼
That castrol 5w30 slapssss bro
So far running good 👌🏽
Brooo that cooler makes the car look even sicker and with that turbo kit u going to install sheeeeeesh living a dream
Thanks bro, we shall get there pretty soon
I run Castrol Edge on my G.
Noti gang
SHEEESH!
Bad ass video bro🔥,but you need that AMS oil
Some people mentioned t6 rotella
The oil around the o ring is so that it does not dry out and crack
Thanks for the info brotha I appreciate it 🙏
Could you had mounted it where the fog light holes would had been ?
The sandwich is regular or thermostatic. Any suggestions
Looks like you're keeping the factory oil cooler as well. The hose runs to the bottom or the rad
Can u give us the link where u got the oil cooler plss
Link for mishimoto oil cooler ???
where did you get the side skirt splitters from im building my G
Is it the same process for auto?
Link for oil cooler?
hey man, I've been watching your vids since the auto g35, I've been a tech for 12 years. I just want you to be aware you put a big block right in front of your radiator. be aware of overheating issues that may now arise cuz you're blocking air flow significantly. just a heads up. keep up the good work tho!!
I’ll be on the lookout, my car is now actually running a bit cooler, but I’ll keep a lookout
Lol it will never overheat because of the placement of the oil cooler 😂. I ran the intercooler in front of the radiator, and ran the oil cooler in front of the intercooler. Nothing is getting blocked enough to cause an issue
The oil cooler is a heat exchanger, similar to a condensor that sits right in front of the radiator. They have fins that allow air to go through them. I’d understand if it was a huge obstruction but this will not cause over heating. (And yes I’m a tech as well)
@@Boosted_Martin I understand how they work, I've also had dsms that overheated like crazy after a big fmic was put on.. (dsm problems I know) just dont wanna see this car get fucked I think it's pretty nice looking
@@alexturner6504 it won’t, I did have the mishimoto rad and their race thermostat as well. But yeah it won’t hurt it, it’s gonna improve it. These cars desperately need the oil cooler
Does it matter where each hose goes into the sandwich plate I seen multiple videos and none of them show where each hose went into the sandwich plate :/
Doesn’t matter
Doesn’t matter 👍🏻 ^^^
DO NOT USE TEFLON TAPE ON AN FITTINGS/ HOSE ENDS
Link plz for the oil cooler
www.mishimoto.com/03-09-nissan-350z-03-07-infiniti-g35-coupe-oil-cooler-kit.html?gclid=Cj0KCQjw4cOEBhDMARIsAA3XDRhuPWcZM7dath-jZNrqu67r48OxUsID-va3VSkOlQTjAFvNhN0Q9VUaArzuEALw_wcB
I'm sure you have said, but what front bumper are you running?
Kuruma z bumper
@@3dler954 Thanks dude.
What is your wheel specs? Trying to get a new set of rims and don’t know what to go with.
Mine is 19x9.5 -5 and 19x11 -5 but my fenders are pulled and rolled
@@BeDistinct Dang what width is your tire?
10W 30 is the best way to go especially in hotter states like cali and florida, its a tad bit thicker
Is that the same thickness as 5w-40?
@@BeDistinct 5w-40 has a greater viscosity but either one should be fine honestly, i went with 5w-40 for a while and had no issues in florida, your not in a state where the temps get freezing cold so you should be good
Teflon tape/thread sealant is ONLY used on npt threads. With AN fittings, the seal is made at the 37* taper. Tape/paste can prevent AN fittings from making the correct seal. All you need is a bit of oil on the threads and snug it up! Hope you don’t have any leaks
Sheez
5:28 lmaooooo