In my opinion, the metal used is too thin. The wall thickness of the tank should be 4mm. But on the video - the thickness is not more than 2.5 mm. It's not enough
Id only use it to haul waste water, agree its to thin for fuel, beating the metal with a hammer to match seam. Unless it was given a interior rubber coating yet....we all know that is to cheaply made to show care or concern for possible spillage. Just fabricate them as fast as you can and sell sell sell. Let the customer worry about any issues that come up once it leaves the lot.
His skills are really good👍👍
Рак кожи на руках -- хорошая перспектива для того, кто варит не в сварочных крагах.
а где набор эльфийских украшений? Выпиленные сердечки тут делу не помогут!
The guy welding has 6 fingers on his left hand
Sheet is very light kamse kam 5mm hona chahiye
🎉🎉🎉
Как то не интересно смотреть на сварочные работы пол часа.
In my opinion, the metal used is too thin. The wall thickness of the tank should be 4mm. But on the video - the thickness is not more than 2.5 mm. It's not enough
Id only use it to haul waste water, agree its to thin for fuel, beating the metal with a hammer to match seam. Unless it was given a interior rubber coating yet....we all know that is to cheaply made to show care or concern for possible spillage. Just fabricate them as fast as you can and sell sell sell. Let the customer worry about any issues that come up once it leaves the lot.
i have fuel tank truck made in China
Can you send me your contact number?
All these blinded welders.
Seems to be a training center for guide dogs.
Address plz
Location