Це відео не доступне.
Перепрошуємо.
How to Disable Open Door Chime in VCDS on Audi A6 C7
Вставка
- Опубліковано 25 січ 2021
- Here is a a how to disable the annoying open door chime with VCDS on my 2013 Audi A6 C7. Also try binary code 01001111
This probably work on other Audi models as well.
I know you can just press the arrow button on the steering wheel, but this turn it off so you don’t have to press the arrow button.
Check info in description also. 😊
Worked on my '17 S6, worst door chimes of any Audi I've ever owned. But now they're gone! Thank you.
Agree! Glad I could help.
Also work on 2013 Audi S6 C7
This chime was really a pain, best coding ever.
Greetings from France.
Glad to help!
@@goliathbirdeater hey man I have a Audi A6 2016 bit TDI competition, but when I start the car the needles of the speedometer and rev cluster don’t go to the max and back, how can I do that ??
Enabling Gauge Test/Needle Sweep
This will sweep the needles of the speedo and rev counter through their full range automatically when you start the engine.
[Select]
[17 - Instruments]
[Coding - 07]
[Long Coding Helper]
Click on byte 1 and you'll see the selectable option: "Gauge Test/Needle Sweep active"
Check this option
[Do It!]
Tried in my c7.5 and had completely different prestored values so couldn't complete without knowing what else I'd be messing up. Hope another video or workaround comes out!
Nah just change byte 15 to what was shown or the one in the video info
Same channel for b8.5 a4?
Unsure about that.
How can i make that navi display always stay out?
2nd code worked for me thanks 👍
witam, a u mnie jest inny problem, jak wpisze kanał 98 i read nie mam możliwości wpisać poniżej żadnej wartości, tak jak by to było nieaktywne , o co chodzi ?, może ktoś podpowie co z tym zrobić ?
U made my day! Thnx!
Glad to help!
Thx, worked on my a6 c7 2011
Glad it worked for you. 😊
adaptation = delete chime when ignition is ON
long coding = delete chime when engine ON
you showed that you can do adaptation alone,
but what happens if i only do the coding change?
will i get the chime when ignition is ON but no chime when engine is running?
Or do they have to be done together to work?
Hell yeah! Doing this ASAP!
If my current binary in byte 15 is 00000111, what would I change it to?
Try 01001111
@@goliathbirdeater thanks man 😎worked in a6 c7.5 2015
Glad I could help!
Can i code so the fog lights work with the positons lights?
Yes you can.
Legend! Thank you!
Hi, is it posible to change open door chime sound to seatbelt sound effect?
No, that I know of.
Can I change the chime itself of my 2016 audi q5 to the newer audi tones?
I do not think so.
Hi great video but how do i make the handle on my a5 unlock when i touch them
Could be that you do not have that. Only have this blind cover on your handle.
@@goliathbirdeater i purchased the car used is there any way to check using the vdcs or do i have to pull door panel off
Of course you will know if you have if you check behind the handles. You could try and start the car with the key back in the trunk. If you manage that you could be having the extra antennas for the keyless entry.
@@goliathbirdeater ok well then might not have it because there no way to start the car with out putting the key in the spot and pushing in since guess it part of the push to start package option then thanks for the help
Hello, i have an Audi A7 from 2014 3.0 245 diesel. Is it the same way I do it?.. Hate the car turns off when I open door.
I would think so. Just copy the numbers that you have today, and try. If it does not work, put back the numbers you have todsy.
Все супер работает
any idea on how do i do this using the new hex v2 interface as it doesn’t show those bytes when you press long coding helper?
No. Probably missing that modul/option. What car/year is it?
it is 2015 audi a6 c7
Hi, great video ! Which cable do I need to use to connect my Laptop (USB) to my car ?
Thank you, Alin! Ross-Tech VCDS HEX-V2
Is it the same in the A5 FL ? I don’t have the bytes line in there :-(
I don’t know to be honest.
you have to set bits 0 and 3
When I input channel 98 and read, it says function is not available..😢
What car do you have?
@@goliathbirdeater 2012 A6 C7 3.0T
I have an HEX-CAN cable
Strange. You coud try and jump over the ch98 unput and go direct to long coding bit15 an type in. Just take note of the code before.
@@goliathbirdeater ok will try that
Hi, my 2013 A6 dont have channel 98. What should I do?
Does this mean that I just can’t disable that chime?
I do not know. 🧐
It seems to be like that. So if your instrument cluster software version is too old you can’t disable chime, because you don’t have channel 98. Someone correct me if I’m wrong.
Do you have any idea where that buzzer/speaker location is?
I had an A4 and it had a buzzer behind the speedometer. But that buzzer is for other stuff as well.
@@goliathbirdeater Okey, thanks.
can you show me how to code front parking sensors to engage automatically when approach obstacles ahead? i hate turning on manually...audi a7 2017
That is not possible I’m afraid.
Is it C7 FL or no? Thks
2013
Not facelift.
How to disable door chime when engine is on?
Also try binary code 01001111
Omg, thank you very much 😀
Can confirm. Works like a charm
Would this work with obd11?
No, I don’t think so.
I turned off this damn chime with obd11.
Unit 46
Coding
Change Byte 15 to Hex 4F
Adaptation
Change Channel 98 from 1 to 0
Thanks.
@@digital_junkie431
adaptation = delete chime when ignition is ON
long coding = delete chime when engine ON
can you do these separately or does it only work when both are done at same time?
For example i want the chime when ignition is on but engine not running, but i dont want the chime when engine is running. can i only do the coding and omit the adaptation part?
😀