Installing Complete Retrofit Hot Tub Control Pack System Spa Guy How To Series
Вставка
- Опубліковано 26 лис 2022
- Click here for the parts mentioned in this video: hottubpartsofamerica.com/sear...
Or if outside of the United States click this link for our Global site: hottubpartsofamericaglobal.co...
In this Video The Spa Guy shows You How To install a Complete Retrofit Hot Tub Pack.. Like, Share and Subscribe.. - Навчання та стиль
Hi, is there any adapters so to speak to connect old style ozone, light, pumps, audio plug's to updated plugs on a brand new control box? I.e. if the old box has 4 pins and the new one is a 3 pin pattern.... Or no? Thank you in advance
I have an old Sundance Spa Lounger, The control circuit board motor jet relay got burned as well as the air blower motor. @220 -240 volts power to it ..and the water heater is sitting above the water pump..Will this Retrofit Modpack will work. The water heater has a stainless steel curbed tubing at inlet end ..It is 6kw High Flow heater on it.
There is no straight solution for that set up.. A BPBEE Remote Heater system is most likely the correct one but there are other things you need to know.. Do you have a 3 wire system? Do you have just One Pump and Blower? Is your main pump a 1 or 2 speed? You need the answers to those things.. call my guys 772-800-5445 with the answers and they can help you figure out the best solution.. Thanks, Spa Guy
Hey spa guy,
Can you do a video on upgrading an older spa to a wifi enabled smart controlled tub. Does it only involve replacing the top side controller or do you have to replace the pack?
Great job I love it
I have a Balboa system that has been replaced and there is the Hi temp wire laying loose within the area. Does this not go into the pack as you have stated in your video
can i swap out the heater, control panel and tht thing u changed for a newer version? (basically doing a full upgrade.)
Hey there! I am a PR from Amazon brand and have been following your channel. I really enjoy your content and would like to collaborate with you. How can I get in touch with you?
Same as a waterway pack. Informative.
I do not recommend a Waterway Pack as they have not been around long and are not proven.. Also hard to find parts for them..
Nice tutorial, but why did you not use a fitting where the wiring enters the unit? 😮 You know, for strain relief and keeping water out.
very nice
Hi, we have either a 1991 or 1992 cal spa supra in our home. It has been well maintained, but it is old. We were wondering if one of those retro fits would work for us?
We are dealing with that now.... Old control box arched and blew a fuse right out of the old box.... Bought a new replacement control box with the heater pump and only problem we seem to be running into is the plugs for the pump, radio, lights,... With the pin pattern
Would you mind sharing where to purchase the amp style connector pin extractor tool? 14 gauge wire. Thanks!
Pin tool is on the website I will put a link here.. hottubpartsofamerica.com/amp-style-connector-tool-for-pin-removal/
@@spaguyhowto7417 thanks!
What's that pin tool called? To remove the leads from the white plug end.
hottubpartsofamerica.com/amp-style-connector-tool-for-pin-removal/
you're way too comfortable sticking your hands around LIVE 240V lol
Been working on electricity for 40 years.. no big deal..
@@spaguyhowto7417 😆 brave