Trashed Craftsman Riding Lawn Mower. Can We Get It Running?

Поділитися
Вставка
  • Опубліковано 11 вер 2024
  • I answered an ad for a free Craftsman riding lawn mower and pick up this little gem of a mower. It has been sitting abandoned outside somewhere between five and ten years so let’s see if we can get it running on the cheap.

КОМЕНТАРІ • 27

  • @ronniereaver2815
    @ronniereaver2815 Місяць тому +3

    On tires with slow leaks (dry rot), I use automatic transmission fluid. It works about 95% of the time. I usually save used ATF for this purpose. I have not tried the oil trick to determine which works better since i have had such good luck with ATF.

    • @GaryAhl
      @GaryAhl  26 днів тому

      I'm glad to hear you had success with the ATF and I will try it to see if it works better than the motor oil. Thanks for the comment!

  • @krispytinkerz
    @krispytinkerz Місяць тому +3

    Thanks for including your struggles and not cutting too much of the actual work out. Fwiw, there is a belt diagram on the under carriage.

    • @GaryAhl
      @GaryAhl  Місяць тому +1

      If I edited out all my struggles my videos wouldn’t be very long. Thank you for the kind words!

  • @goofe.washington953
    @goofe.washington953 Місяць тому +3

    That looks like a beautiful piece of property. Wow…

    • @GaryAhl
      @GaryAhl  Місяць тому

      I certainly enjoy the property. Thank you for your comment.

  • @bobwalton4879
    @bobwalton4879 23 дні тому +1

    I love, Love, LOVE the Lt 1000's!!! I bought 2, different times. The first one has the twin Briggs motor, a lot of electrical common problems, fuse, starter relay, and stuff @ Craig's list for $250.00 would not move in free wheel. fixed the stuck lever on the trannie, it is now in the garage on the charger, Can't seem to part with it now. The second one Craig's list for $200.00 the same motor as you have, In the driveway now for two years, had the same free wheel issue, the guy bought it from the original owner lady, and could not fix it. I tried to take a rear tire off and it would not budge off the axle, It now is still there, with hopes of bringing it in this winter, but too many outside issues to work on it now. Can't wait to do it. have a great week sir. Both have great decks.

    • @GaryAhl
      @GaryAhl  23 дні тому

      They are good little machines, and I enjoy working on them. Thank you for the comment and I hope everything works out with the mowers.

  • @philliphall5198
    @philliphall5198 10 днів тому +1

    I’ve been painting the dashboard and rear plate on them and it really helps the looks of it 😊
    Plus I put on new front tires if it’s a really good shape mower 😊

    • @GaryAhl
      @GaryAhl  9 днів тому

      I probably will paint the dash but more than likely I won't get around to it until spring. Since this mower is a manual, I plan to use it for pulling my thatcher. Thank you for the comment.

  • @fred520
    @fred520 12 днів тому +2

    You are doing a good job
    Thanks

    • @GaryAhl
      @GaryAhl  12 днів тому

      Thank you for the kind words!

  • @andrewchristiansen8311
    @andrewchristiansen8311 Місяць тому +3

    42:22 It was at this moment I saw the camo crocs and knew this man meant business....

    • @GaryAhl
      @GaryAhl  Місяць тому +1

      😂 thanks for the laugh!

  • @johnbellot3646
    @johnbellot3646 Місяць тому +2

    If I were you, I wouldn’t even put the deck back on it. I would just get yourself a little trailer and I noticed you have a garden and if you have a fireplace, you can haul brush or wood.

    • @GaryAhl
      @GaryAhl  26 днів тому +2

      I have a Kubota 2610 and an electric golfcart for gardening however, since it has a manual transmission, I plan to use it to pull my detacher and sprayer. Thank you for the comment!

    • @philliphall5198
      @philliphall5198 10 днів тому +1

      I sold my 14 k mule two seater and now I ride a 50 mower with no deck around 😮
      I was watching it fade away and said that is foolish 😊

    • @GaryAhl
      @GaryAhl  9 днів тому

      I like the idea but I would have to do a pully swap to gain more speed.

  • @fightdhr8866
    @fightdhr8866 Місяць тому +1

    Got one just like it few days ago..Someone took really good care of the outside of it but never changed the oil..Pull the bottom off motor just for kicks and it was chuncky..Broke chunk out the cyclinder crack case..I had a 18 intek i used the cover off the old one 17.5..It looked brand new....Your deck looks ruff..hehe..Thanks for sharing. .❤

    • @GaryAhl
      @GaryAhl  Місяць тому

      Thank you for your comment! I do find it enjoyable working on these mowers.

  • @snoopysrc
    @snoopysrc Місяць тому +3

    You gained a new subscriber

    • @GaryAhl
      @GaryAhl  Місяць тому

      Thank you, I greatly appreciate it!

  • @chadfield376
    @chadfield376 Місяць тому +1

    Nope, I would not waste the effort on the deck either; I would see if the spindles and blades are saveable to use for bench stock or to put on a better 42/46in deck for that model mower😊.

    • @GaryAhl
      @GaryAhl  26 днів тому

      Unfortunately, only the blades were worth saving. Thank you for the comment!

  • @jozekpusnik4868
    @jozekpusnik4868 Місяць тому +2

    Top👏👏👏

  • @JoshPurdin-xv3qi
    @JoshPurdin-xv3qi 12 днів тому +1

    Yeah I wouldn't try to repair that

    • @GaryAhl
      @GaryAhl  12 днів тому

      😂 Thank you for the comment.