Pro scooter #2. Thx, works fine, new accelerator $12. Only problem was in part when you need move new wires through the hole, I have to remove 2 screws in top and bottom of Light then remove light, you can then press a wires from front side, without it it was not possible, connector was blocked in hole by rest of wires, it is more safe also :) Easy and cheap replacement.
I crashed on a scooter 2 days ago and I completely destroyed my throttle, resulting a code 14 error appear on the screen. I've managed to successfully replace the throttle thanks to your tutorial - it was very clear and easy to follow. The only small detail I noticed is that removing screen's plastic cover was suprisingly hard. It looks like xiaomi scooter 3 dosent have 2-part screen disassembly - it have one large piece difficult to lift. I treated glue with a hair dryer with good result. After reassembling cover i covered it with electric tape for extra rain procection since once lifted glue will always be weaker. Many thanks for the video
Thankyou so much! Watched other tutorials, so knew what issue was BUT you were the first one to advise opening first to check cable was connected properly, which is exactly what I did....Spot on!!! Thankyou!!
Cok yararlı video olmus scooter olupta bos beles teknik servise veya tamirciye gitmesine gerek yoktur evinde teknik takımlar varsa herkes degişebilir gaz kolunu...
@@BurakAkbulutTV Gaz kolundaki diyotlardan kaynaklı olabiliyormuş. O yüzden yenisini taktı. Fakat full şarj iken scooter resetleme yapınca düzelenlerde var. Bende de son 1 haftadır başladı. Resetliyorum düzeliyor bazen kafasına göre yapıyor. İşin kötü tarafı yolda hızlıyken yaparsa sorun. Bakalım çözüm üreteceğiz :D
Thank you so much for the Video, worked great for me!! You should add text that if you find it hard to get the cable back, you could screw out the front light :) that’s what i did after 50 mins of mental screaming cuz of the lack of space! //Rockhoe
Hey there, I cant seem to unscrew the throttle using the allen key. It wont go in and im unable to unscrew the throttle in order to replace it. It will just get loose and doesnt work. The throttle still remains tight.
Idk what to say 🤷🏼♂️. Are you sure that you are using a 3mm wrench?? Because if you are using a 3 mm wrench, you probably broke the screw and you need to force remove the accelerator
@@StefanoGentile01 How can I force remove the accelerator? Will it break any key components? Also, I have been using a 3mm allen key and I havent broke it.
@@StefanoGentile01 Ive managed to remove the outer accelerator including the spring. However the inside components still remain... Sorry im new to all this
hello i would be so happy if you answer , my scooter works perfectly and also the throttle works great but whenever i go over a bump the scooter start beeping error code 14 but when i press the brake the beeping goes away and everything reworks perfectly fine so do you think is there a disconnected cable inside or i should buy a new throttle?😊
Sometimes the connector are not making contact and a little movement could fix the problem. The best solution is to disconnect and reconnect everything
Yep, the throttle is the only sensitive component. When it doesn't work properly it's because the cable is disconnected or because it's broken and you need to replace it. In 3000 km I replaced 2 throttles.👍🏽
hey man I know this was a year ago but I was hoping i could get a response. I was using my scooter normaly then i charged it and When tried to use it again the next day it showed this error 14. So I played around with it and figured out that breaking makes it normal, so I rode it to see if it was fixed but noticed that now when I full accelerate its slower then when im close to full acceleration by 10 mphs its really weird, and also when I break it contiunes to move at 5km no matter what, please help me, I subscribed!
14 is error of throttle sensor, so it makes sense you get wrong acceleration and funny behaviour. New throttle is like $8, get it and replace as in video.
@@MrVolodus had to do myself a bit of expiramentation and found that out after an hour because the screw was covered and the throttle felt to high, hopefully someone else will see this, thanks for you help
It's a new one, they are not that strong. Try to reconnect all the cables, it could happen that some cables disconnected. If it keeps not working you have to replace the throttle
If there’s a big price difference, I would suggest 1s, it’s the same scooter (with the same battery) but the 3 has a more powerful and less efficient motor
mine stopped yelling after i literally spanked the mother board. Ordered another throttle, before I replace it, I gave it another try, it worked without replacing. *Confused unga bunga*, so I guess, try and spank the motherboard before order a throttle?
@@StefanoGentile01 I'm not sure what cables reconnected. Ok full story: the scooter started screaming at 2 am so my main goal was to make it stop so I can sleep, and go on vacation the next day. I uncovered the mother board and disconnected every cable and reconnected it but nothing happened. Then I thought about disconnecting the battery so I can go to sleep, so I started unscrewing the bottom cover (for some reason, the motherboard cannot be disconnected from the battery like the other components). The scooter kind of fell and the mother-board hit the floor a bit because it was held outside the protective case by the wires. It finally stopped, then I tried to turn it on to see if it still "alive" and the error and notice started again. So this time hit the mother board with my finger and it stopped again, so I went to sleep. After coming from my vacation I got my new throttle, and before replacing it I wanted to give it another try. I pressed the button and no error showed up. I still got the new throttle (I didn't change it). And it's been working fine since then. So, I'm not sure which wires reconnected when I hit it. I have no idea what happened, just shared my experience!
Hii, i have same problem there is a 24 red number and screwdriver symbol but i have another problem, my scooter can't be pressed, can i do this method?
Hi ich habe mir den mi pro 2 gekauft. Da meiner kein rechtes Bremskraft hatte habe ich das Oberteil eines 1s aufgeht. Aber seit dem hab ich 14fehler. Egal welchen Gashebel ich nutze. Hast du ne Idee was das sein kann…¿ Gruß marcel
Try to disconnect and reconnect the throttle. If it’s not working you need to change the throttle. For example if you pull the cable too hard it’s really easy to break it. 👍🏼👍🏼
@@StefanoGentile01 Thanks for replying, managed to do it myself, tie tape around the cable and pull and push through Thanks! ps. pro2 users must also release the second brake to even be able to remove the throttle 👍👍👍
Does anyone know if you need a legit one or can I use a clone accelerator the one on the clone has resistance pulling it down whereas the legit Xiaomi 1s pulls down really easy I can’t reset it I get error 14 should it have some resistance or be really easy I only paid £30 for it and have a couple of clones with bad batteries
si ciao sul mio monopattino xiaomi essential sullo schermo mi compare error 15 ho aperto tutto collegato i fili ma non funziona mi potrebbe aiutare per favore
Ciao, scusa se ti ho risposto in ritardo ma ero in vacanza, per l’errore 15 ho fatto un altro video. Se hai già scollegato e ricollegato tutto devi sostituire la manopola del freno. Però prova prima a guardare altre soluzioni in giro, mi sembra che ce ne siano di più economiche; tipo cambiare solo la placchetta metallica
My aovopro just all of a sudden went to 12 Speen and won't let me go any faster even when fully charged. Do you now what the problem may be please.? I've only had it 5 months ☹️
Ciao Stefano Ho visto il tuo video Bravo io ho avuto un problema che mi hanno rubato la tesserina la la rsf per fare partire lo scooter tu mi assicuri che facendo questo lavoro riparte lo scooter o devo rifarmi fare la la scheda dalla casa madre mi puoi dare una mano Grazie
Error 14 is “13 Phase C of the motor current is abnormal” it never happened to me. I would suggest to disconnect and reconnect the motor cables and if it still doesn’t work, replace the motor
C'è un problema ho il vivobike s2 quando provo a sbloccarlo mi dà errore nonostante io premo acceleratore poi freno qualcuno sa come resettarlo senza portarlo in garanzia che ci mettono un po'?
genius should labeled his video : fixed with new part. I want to see how you can fix this without buying new stuff from the Chinese. This video is basically useless to me.
Pro scooter #2. Thx, works fine, new accelerator $12. Only problem was in part when you need move new wires through the hole, I have to remove 2 screws in top and bottom of Light then remove light, you can then press a wires from front side, without it it was not possible, connector was blocked in hole by rest of wires, it is more safe also :) Easy and cheap replacement.
👍🏼👍🏼
Disconnecting and reconnecting the cables helped, thank you brother.
you are welcome
Which cable i am having same issue right now
Pozdrav. Error 10 i 14 izbacuje.
I crashed on a scooter 2 days ago and I completely destroyed my throttle, resulting a code 14 error appear on the screen.
I've managed to successfully replace the throttle thanks to your tutorial - it was very clear and easy to follow.
The only small detail I noticed is that removing screen's plastic cover was suprisingly hard. It looks like xiaomi scooter 3 dosent have 2-part screen disassembly - it have one large piece difficult to lift. I treated glue with a hair dryer with good result. After reassembling cover i covered it with electric tape for extra rain procection since once lifted glue will always be weaker.
Many thanks for the video
I've made a video about how to change the throttle for the Scooter 3, you can find it in the playlist. You are welcome
Thankyou so much! Watched other tutorials, so knew what issue was BUT you were the first one to advise opening first to check cable was connected properly, which is exactly what I did....Spot on!!! Thankyou!!
Great video, but shaking the scooter can fix the problem. We saw this as a comment on another video and it worked for us.
yes, many times the connector is not well connected
Wth 😂 I was just about to demount my scooter! But I saw this comment and its now working again. All it needed was a shake!
I encountered the same problem and was able to get it fixed quickly. Thank you for this video, It really helped 🙏
Did you have to buy a new part? I seem to have the same problem
You are welcome :)
wires under lights were cut cos handlebar had moved to side by falling to ground pipe cutting wires then.
Thanks. Just fixed my daughter scooter. Very appreciate for info🎉🎉🎉🎉🎉
You are welcome 🥹
Cok yararlı video olmus scooter olupta bos beles teknik servise veya tamirciye gitmesine gerek yoktur evinde teknik takımlar varsa herkes degişebilir gaz kolunu...
Exactly, you will save money and time !!! That's the main purpose of my channel :)
Abi problem gaz kolumu tam anlayamadım
@@BurakAkbulutTV What do you mean? Because there are different throttles for Xiaomi, you need to check the cable connector
@@BurakAkbulutTV Gaz kolundaki diyotlardan kaynaklı olabiliyormuş. O yüzden yenisini taktı. Fakat full şarj iken scooter resetleme yapınca düzelenlerde var. Bende de son 1 haftadır başladı. Resetliyorum düzeliyor bazen kafasına göre yapıyor. İşin kötü tarafı yolda hızlıyken yaparsa sorun. Bakalım çözüm üreteceğiz :D
Thank you very much for a quick and else install and fix.👌🏾👊🏾
You are welcome :)
how much is to fix it ??
Pfff what a legend, I destroyed the one of my boss and this fixed it, you saved me from getting fired.
You are welcome :)
thank you so much for your video.
which screwdriver size do we need to unscrew the 3 little screws on the screen?
Normal cross screwdriver, maybe a little small
Bravissimo ottimo video
Grazie :)
Thank you so much, this was really helpful ☺️
You are welcome :)
Thank you for video
I struggled to get cable back threw so I tied a piece of string a tweezers and pulled it threw easy
All working now 🙌
yeah, mine got broken for the second time and I used your method too 👍🏽
@@StefanoGentile01 the device you changed often stop working ?
@@aymanemaverick777 what do you mean ? Can you be more specific?
@@StefanoGentile01 i mean how often you change the throttle ?
Was ist der Unterschied zum alten Board mit dem ECO Schriftzug? Kann man das neue trotzdem tunen?
No idea how was the old one
Most helpful video ive seen on this thanks for being simple
Thank you so much for the Video, worked great for me!! You should add text that if you find it hard to get the cable back, you could screw out the front light :) that’s what i did after 50 mins of mental screaming cuz of the lack of space! //Rockhoe
Thank you very much, I usually use a wire that bound to the cable 👍🏼👍🏼
@@StefanoGentile01 tried that but the space is so small that if you connect the cable you can drag too hard and dissemble it ;)
The best comment ! Thx 😊
Excellent thanks, straight to the point
Thank you :)
Hey there, I cant seem to unscrew the throttle using the allen key. It wont go in and im unable to unscrew the throttle in order to replace it. It will just get loose and doesnt work. The throttle still remains tight.
Idk what to say 🤷🏼♂️. Are you sure that you are using a 3mm wrench?? Because if you are using a 3 mm wrench, you probably broke the screw and you need to force remove the accelerator
@@StefanoGentile01 How can I force remove the accelerator? Will it break any key components? Also, I have been using a 3mm allen key and I havent broke it.
@@StefanoGentile01 Ive managed to remove the outer accelerator including the spring. However the inside components still remain... Sorry im new to all this
@@mxraluchi9584 As soon as I get home I will check again if it is a 3 mm key, but i'k kinda sure that is 3, but it could be 3,5 idk.
@@StefanoGentile01 ??
thank you very much, the video is very helpful! everything worked great. thanks again
you are welcome
hello i would be so happy if you answer , my scooter works perfectly and also the throttle works great but whenever i go over a bump the scooter start beeping error code 14 but when i press the brake the beeping goes away and everything reworks perfectly fine so do you think is there a disconnected cable inside or i should buy a new throttle?😊
Try to disconnect and connect every cable, if it’s still not working I would suggest to change the throttle :)
I just did the cover off and immediately it worked again thank u für this video 🫰
Sometimes the connector are not making contact and a little movement could fix the problem. The best solution is to disconnect and reconnect everything
did you change it for a new one?
prova con quello vecchio a scollegare e a collegare il connettore e vedere se funziona. In caso contrario, è da cambiare
What model is the Phillips screwdriver?
Bu adam gerçekten iyi
Thank you 😎
Thank you so much It worked!
You are welcome 🙂
Did you need a new part?
@@lionheart9692 No I just plugged it out and back in.
@@damngurl6053 o ok thanks,I'll try that first
@@damngurl6053 Pluged what, the inside cables?
Am aceeași problemă la trotinetă,deci trebuie să schimb complet firul sau doar să îl deconectez? Nu mi-am dat seama exact în video.
I have an aovoPRO electric scooter. I hope that error never comes up. Do you have any idea what caused it? Did it overheat or get wet?
the throttle is really fragile
thanks .. just repaired mine 😊
You are welcome :)
Did you replaced with a new throttle or you just unpluged all the cables and pluged it again?
Read the description
Hello did you replace it with a new throttle?
Yep, the throttle is the only sensitive component. When it doesn't work properly it's because the cable is disconnected or because it's broken and you need to replace it. In 3000 km I replaced 2 throttles.👍🏽
Thanks for help!
You are welcome :)
Did you replace the throttle?
Yes, everything is written in description
hey man I know this was a year ago but I was hoping i could get a response. I was using my scooter normaly then i charged it and When tried to use it again the next day it showed this error 14. So I played around with it and figured out that breaking makes it normal, so I rode it to see if it was fixed but noticed that now when I full accelerate its slower then when im close to full acceleration by 10 mphs its really weird, and also when I break it contiunes to move at 5km no matter what, please help me, I subscribed!
Same!
14 is error of throttle sensor, so it makes sense you get wrong acceleration and funny behaviour. New throttle is like $8, get it and replace as in video.
@@MrVolodus had to do myself a bit of expiramentation and found that out after an hour because the screw was covered and the throttle felt to high, hopefully someone else will see this, thanks for you help
Hey if the scooter is lock dose this one help with it ?
Had this issue from the first week I bought one,14month later it has finally gone, so basically I need to buy a new throttle???
Hi, ich habe den Gashebel gewechselt und der Fehlercode ist weg. Aber der Scooter nimmt kein Gas an. Woran kann das liegen ?
wow, I have no idea, it never happened? Does it show any other error?
@@StefanoGentile01 nein, kein Error. Alles okay soweit
wires under lights transistor plate were cut cos handlebar had moved to side by falling to ground pipe cutting wires then.
is there a transistor in the throttle ??🤔 Because I'm really interested in its working but I cannot understand how it works
or sabotage by hammering handle to ground often
@@StefanoGentile01 Ebike throttles - how do they work? in yt search
Pero el acelerador que mete es el mismo o otro nuevo ?
It's a new one, they are not that strong. Try to reconnect all the cables, it could happen that some cables disconnected. If it keeps not working you have to replace the throttle
I don’t get it! Does he just unplug it and than put it back together? From 1.24 and at 1.27min he just put everything back or al I missing somthg?
try plugging it and unplugging it, if it keeps not working, just replace it
New part.
I have a E2 error that popped up do u have any clue how to fix that
Bu xiaomi elektrikli scooter 1S hangisini alacağımı karar veremedim 1S scooter’mı yoksa xiaomi scooter 3’mü
If there’s a big price difference, I would suggest 1s, it’s the same scooter (with the same battery) but the 3 has a more powerful and less efficient motor
mine stopped yelling after i literally spanked the mother board. Ordered another throttle, before I replace it, I gave it another try, it worked without replacing. *Confused unga bunga*, so I guess, try and spank the motherboard before order a throttle?
connector made a connection or bad broken wire reconnected by moving spanking maybe
in the description I wrote to try to disconnect and reconnect the cables. It could happen that the connector disconnect itself because of vibrations.
@@StefanoGentile01 I'm not sure what cables reconnected. Ok full story: the scooter started screaming at 2 am so my main goal was to make it stop so I can sleep, and go on vacation the next day. I uncovered the mother board and disconnected every cable and reconnected it but nothing happened. Then I thought about disconnecting the battery so I can go to sleep, so I started unscrewing the bottom cover (for some reason, the motherboard cannot be disconnected from the battery like the other components). The scooter kind of fell and the mother-board hit the floor a bit because it was held outside the protective case by the wires. It finally stopped, then I tried to turn it on to see if it still "alive" and the error and notice started again. So this time hit the mother board with my finger and it stopped again, so I went to sleep. After coming from my vacation I got my new throttle, and before replacing it I wanted to give it another try. I pressed the button and no error showed up. I still got the new throttle (I didn't change it). And it's been working fine since then. So, I'm not sure which wires reconnected when I hit it. I have no idea what happened, just shared my experience!
Hii, i have same problem there is a 24 red number and screwdriver symbol but i have another problem, my scooter can't be pressed, can i do this method?
Error code 24: System voltage test failed.
I would recommend to watch another tutorial. This is not the right one
So do you need to put in a new accelerator
If it’s still not working after disconnecting and reconnecting the cable, yes, you need to change it
thanks alot!!
You are welcome 🙏🏼
I bought this but the part which you have to plug in was to small I don’t know if I need to get a whole another scooter
I think you bought the wrong component, there are two models. I'm sorry
Hi ich habe mir den mi pro 2 gekauft. Da meiner kein rechtes Bremskraft hatte habe ich das Oberteil eines 1s aufgeht. Aber seit dem hab ich 14fehler. Egal welchen Gashebel ich nutze. Hast du ne Idee was das sein kann…¿ Gruß marcel
Try to disconnect and reconnect the throttle. If it’s not working you need to change the throttle. For example if you pull the cable too hard it’s really easy to break it. 👍🏼👍🏼
Which company e scooter you are using I want the electric panel same as yours. Also my throttle is not working
Do you mean throttle company ??
@@StefanoGentile01 no the company of your e scooter?
@@StefanoGentile01 I can't find circuit dashboard for my e scooter looks exactly like yours
Gracias muy bueno el video😊
Hi, I suggest you to watch one of my latest videos “error 14 xiaomi scooter 3”, it’s the same procedure, but way better. Have a nice day
Do you link to the replacement part? Or a pn?
yes, I linked the new throttle
Thanks
You are welcome
Mine still works but 14 will flash when its wet ?
try to disconnect and reconnect the connectors. It if keeps not working I would suggest to replace the throttle
So its the dash board that's the error 14 problem?? Yes???
Nope, it’s the throttle , try to disconnect and reconnect the cable. If it’s still not working you have to change the throttle
Le pusiste un nuevo acelerador o es el mismo
New accelerator, there’s a better video on my playlist
so y did it have an error in the first place what part you need to replace?
The throttle that is in description, but try to disconnect and reconnect the cables first
@@StefanoGentile01 I mean was it because it got wet? or does the wire get faulty overtime? or did it fall down accidentally to cause this?
This throttle is really delicate. I broke it twice after falling
Se necesita comprar otro acelerador?
prueba el viejo para desenchufar y enchufar el conector y ver si funciona. Si no, hay que cambiarlo
Não.
Can you give me a link of the part that need to be changed to fix error 14?
you have it on description
I have an electric scooter when it speeds off itself can I solve it
Try. to change the throttle
I don t get it... what actually have you done? I have the same problem 😣
I just replaced the accelerator
I installed HL-100 now my throttle from original HH-100 isnt working.. what should i do theres a big E
Whats the name of the song that plays in the video⁉️ i love it…and thanks for a good video…🙏🏻
IT'S CALLED "Fredji - Happy Life (Vlog No Copyright Music)"!!! I'm so glad that there's someone who appreciates my background music taste 🤩☺️🥺
@@StefanoGentile01 Thanks Bro!🙏🏻
@@StefanoGentile01 ur so funny tbh
Ty
You are welcome 🙂
thx👍
You are welcome :)
I unplugged my throttle cable an plugged it back in an it’s worked perfectly fine hmmm
Yeah, I said to do that in description. Many times vibrations are disconnecting the cables 👍🏽
what tools did you use ?
Wait, which one? I wrote every tool in the video
@@StefanoGentile01 ask if the tools you used
@@tyvon21 I’m sorry, I cannot understand you
@@StefanoGentile01 name the tools you used, spell it out
@@tyvon21 watch the video again
Very nice thankss
You are welcome 🤗
Hello, I have problems getting the throttle cable past the brake cable on the xiaomi pro 2
Hi, sorry for the delay. You can tie the cable to a piece of string and pull 👍🏽
@@StefanoGentile01 Thanks for replying, managed to do it myself, tie tape around the cable and pull and push through Thanks!
ps. pro2 users must also release the second brake to even be able to remove the throttle 👍👍👍
Does anyone know if you need a legit one or can I use a clone accelerator the one on the clone has resistance pulling it down whereas the legit Xiaomi 1s pulls down really easy I can’t reset it I get error 14 should it have some resistance or be really easy I only paid £30 for it and have a couple of clones with bad batteries
hey, before i start doing this, did anybody also encounter the problem, that the button of the scooter did not react, at the same time?
Try to change the throttle, they are cheap on Aliexpress
si ciao sul mio monopattino xiaomi essential sullo schermo mi compare error 15 ho aperto tutto collegato i fili ma non funziona mi potrebbe aiutare per favore
Ciao, scusa se ti ho risposto in ritardo ma ero in vacanza, per l’errore 15 ho fatto un altro video. Se hai già scollegato e ricollegato tutto devi sostituire la manopola del freno. Però prova prima a guardare altre soluzioni in giro, mi sembra che ce ne siano di più economiche; tipo cambiare solo la placchetta metallica
@@StefanoGentile01 dovrei ordinare un nuovo freno e montarlo
@@tunsi_la_zone4324 probabilmente sì, ma aspetta 10 min, provo a cercare una soluzione più economica
@@tunsi_la_zone4324 Io ho provato ad ordinare questo: a.aliexpress.com/_EQL6ru3
My scooter is fulky charged but its super slow
I'm Tring to find help with min to. It's fully charged but only let's me go to 12kz and no more. ☹️ Can't find anything anywhere that helps with that.
I have no idea what happened. I tried to look on internet, but nothing. Sorry
Thanks you master
You are welcome :)
Soketleri cikarip yaglama yaptim wd 40 ile calisti suan problem yok
Super
My aovopro just all of a sudden went to 12 Speen and won't let me go any faster even when fully charged. Do you now what the problem may be please.? I've only had it 5 months ☹️
I've never had aovopro, sorry :(
هل يجب شراء دواس جديد ،؟
If after disconnecting and reconnecting the cables it keeps not working maybe yes. It’s written in the description
How do you remove the grip
The first time you have to pull a little strong. Before inserting it again, I put a little of soap, so it slides better 😉. Have nice holidays 🎅🏼
00:26 la brugola 3mm che ti danno all'acquisto non entra.. sembra che sul mio ci voglia una 2.5... devo recuperarne una.. che palle
Ahahahhaha, mi dispiace
Ciao Stefano Ho visto il tuo video Bravo io ho avuto un problema che mi hanno rubato la tesserina la la rsf per fare partire lo scooter tu mi assicuri che facendo questo lavoro riparte lo scooter o devo rifarmi fare la la scheda dalla casa madre mi puoi dare una mano Grazie
in che senso ti hanno rubato la tesserino ?
@@StefanoGentile01 il portafoglio
אם עשיתי את זה וזה לא עבד אני צריך להחליף חלק ???
If you disconnected and reconnected and it didn't work, you should replace the component, you can find it in description
Those scooters fro that company are an absolute joke, would never buy that crap dude
I wouldn't say that Xiaomi is a bad scooter brand, especially the latest ones
I messed up by taking off the accelerator
How ahahhaa ??? That was kinda easy
The erori 14 is when you enter turbo mode
So what??
How you fix code 13. There’s no videos for code 13
Error 14 is “13 Phase C of the motor current is abnormal” it never happened to me. I would suggest to disconnect and reconnect the motor cables and if it still doesn’t work, replace the motor
but i have to shop and change a new accellerator?
Yes, you can find the new throttle on the description
how ami i suppose to do this when kids need the same help
Mine doesnt work but doesnt show the error
No idea why, I’m sorry
Disculpa resetie mi scooter y ahora solo llega a 20km ya no a 25km que debo hacet
Wait, how the fuck is it possible ahahhaha. Do you have an Essential or an 1S/PRO2
@@StefanoGentile01 i have the 1s
@@luiszarated2325 This could be a problem, maybe try to install a new driver using your phone👍🏻
My 🛴 sencor one E7 error whats problem please helps my…!!!!
I’ve never seen an E7 error. And I’ve also look on internet but I didn’t find anything :(
C'è un problema ho il vivobike s2 quando provo a sbloccarlo mi dà errore nonostante io premo acceleratore poi freno qualcuno sa come resettarlo senza portarlo in garanzia che ci mettono un po'?
Ciao, purtroppo non ho mai avuto un vivo :(
Not working 😢
I’m really sorry 😪
is it a new throttle?
Yeah, I used a new throttle from Amazon.
I fitted a new throttle..and got the beeping code 14 !!!!!
Refitted original throttle and the beeping stopped/no codes???
I did the same thing but still got that error!
Did you change the throttle ??
@@StefanoGentile01 Yes I did and then I saw that the red wire that connected to the screen is cutted. Can that be it?
Hi, Are you still on telegram or any social media?
genius should labeled his video : fixed with new part. I want to see how you can fix this without buying new stuff from the Chinese. This video is basically useless to me.
👀
@@StefanoGentile01😂
I unclipped it and clipped it back and it magically worked again
عندي واححدة كما تعك تكتبل كيفك 14
❤❤❤❤❤🎉🎉🎉😊 0:46
@@fizzyjoshyclipped what?
Is it real
Really real
How can I take off the display
Wait what ahahha??? I've shown how to take off the display. What do you mean??🤌🏽
how much is to fix it
On Amazon (in Italy) is around 11 euros
You should have explained
No idea what u just did
I replaced the old throttle, you can find the throttle in description
hi, are you still avalible on telegram?