How to Replace String Trimmer Line
Вставка
- Опубліковано 30 чер 2024
- Is your string trimmer ready for the season? Here's how to replace the line on your trimmer. All you need is some new line of the proper size and in a few minutes you'll be ready to cut some weeds.
Want a T Shirt, Mug or Sweatshirt? Get one Here. teespring.com/stores/home-bui...
-- My Amazon Affiliate Store for recommended products--
www.amazon.com/shop/homebuilt...
-- My Patreon Page --
/ homebuiltworkshop
-- My Website--
www.homebuiltworkshop.com/
-- My Webstore --
www.homebuiltworkshop.com/shop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
-- My Second UA-cam Channel--
/ @insidehomebuiltworkshop
----- Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. Work at your own risk, be safe, wear your safety gear, and most of all, have fun!
Thanks from Ireland ! Best video for replacing my strimmer líne - the only video that showed me what the 0.80 and 0.95 slots are there for and this makes a huge difference when trying to thread the line without unravelling!
Great video thanks your video is great at this line rewind very easy
Thank you.
Ive been doing this back asswards my whole life before this video
Thank you ! I bought the same Troy Bilt 4 yrs. ago, 2 yrs. it was out of service. I just got it fixed & forgot how to load new line properly. But now I’m on track again thanks to this video ✔️
Awesome. I have even had to go back and watch. Lol.
Wow, I wish you would have told me this 20 years ago... Thanks .
I would like to thank you for showing me how to string my grass trimmer. It was very easy once you showed me how to do it. Thanks again.
+BILL RYLE you're welcome. Glad I could help. I need to mine again too.
Great video
Live only 4 inch of the line so will be less resistance and RUN LIKE A FERRARI ( CAR RACE 😆😆😆😆) JUST TRY 4 INCH IS ENOUGH TO DO A LOT OF DAMAGE TO TE GRASS 😊😊😊😊😊
How to restring a Craftsman weed Wacker
Okay Okay @@atenasatenas8138
solved my problem with cap - looks like mine's a bump release - good video
Very good video. Thank you!
Love the variety of your videos. Subbed.
Thank you!
Very good explanations ! Thank you very much for your help
Glad it was helpful!
Yes very easy after all these years
Thanks! Well done!
Thanks !
Thanks Jeff!!!!
You are welcome. Glad to help. 👍
I bought the McCulloch in 2003 and was looking for instruction on how to thread the line. Only yours has two holes like mine. I was wondering what the holes were for. Now I know. Mine does not have arrow. If it doesn't work, I'll wind the other way. Thanks a millions.
good work help me out big time , desmond in ireland
Cool, I'm glad it helped you out!
Thanks Jeff.
You're most welcome.
Ok I will go and try it.
wow! Thank you.
Wonderful bro 👌🇺🇸
Thank you so much !
Thanks...good video
Muy bueno!!!
Thank you sir
Great, ty
Hi thank you for showing me how to do this
You’re welcome 😊 I'm glad it was helpful.
What size trimmer should I use for a 43 cc grass cutter. Mine requires a new line trimmer but not sure of it's size
I an trying to get back into doing things myself once again, And I have a Yard Machine 2900 EC that I bought Brand New Last year. It has that bump setup on it. I ran out of trimmer line was trying to replace, but I can't seem to get the Cap off to remove the case for the line. You do it so easy,,, I turned clockwise and counter-clockwise and i just can't seem to get the thing to turn. I assume i can use a set of pliers to grasp and turn.. Is that OK.. ? Dumb question I know,
Grab that thing with some pliers and break it loose. I have to do that from time to time.
I have a very old Husqvarna 125L with a single spool and screw on (non-bump) centre cap. Can't find an explanation on respooling however, this looks very similar. Thanks
How do I unscrew the bump head. Whether I turn it clockwise of counterclockwise, it simply clicks but it never actually grabs and turns off from the line cup. Is it possible to strip the bump head lock head?
I may be spring loaded like a medicine container. Try pushing down on it while unscrewing it. I haven't seen one strip out myself.
Thanku
Very good steps to follow.But my screw is always hard to get off.Never can use just my hands...
Sometimes I need to use some pliers myself. Nothing wrong with that.
wow it almost seems to easy, do all weedeaters wind the same way and that easy ??
looking for a Kakyoin 20V String Trimmer Line. a completely different animal. thank you anyway.
how do you know how much line to wind on?
I had to do some trial and error. I'm sure the manufacturer has this info somewhere. As long as it can go back together after winding, it should be ok.
Okay
My wacker get a very hot.
Why????
Check the air filter to make sure its clean.
Hey any chance you could make a personal email to help me with my MTD Yard Machine weed whacker restring? Having some issues getting it to feed when you bump the head
Shoot me an email to homebuiltshop@gmail.com. I'll do what I can.
98 ki I
TOO MUCH 12 FEET ! 😆 JUST I PUT MAXIMUM 6 FEET OR 4 FEET EVEN BETTER NEVER JAM RUN FASTER 😆😆😆
I can't get the cap off! Is there a trick to it? It's been used quite a bit and it won't turn
Please email me at suscoats11@gmail.com and tell me what the trick is to getting the cap off! It won't turn at all! It's been on for a couple of seasons and was stored in my garage. It starts up great but I can't get the cap off to replace the string
I hate that system !
Its definitely not my favorite.
Look my video I have some invention