My air bladders on Sleep Number 7000 have two nipples, and two hoses each from the pump. Sleep Number sent me a replacement pump with one hose per bladder. I capped off one nipple on the air bladder and attached the one hose to the other nipple. Seems to be working fine. Why did they have two hoses per bladder? Some kind of feedback loop or pressure reduction method?
Howdy. On the plastic connector that comes out of the air chamber, the tip of the plastic has cracked about halfway around. This is right where the small rubber O-ring resides. Do you think supergluing the tip of the plastic will work as a long-term solution? Perhaps once dry, I could add an additional thin coat of superglue and let it dry before putting the small O-ring back in place. Any advice about the best way to repair it will be most appreciated. This is my second Select Comfort bed and I'll not buy a third. They have many cheap parts that are ridiculously expensive and the company doesn't do much to help customers. Thank goodness for people like Air Bed Repair Man who are doing a great service.
Here is a quick king to the repair hose for sleep number bed air chambers with a broken port airbedrepair.com/products/m236-lg-hose-compatible-with-sleep-number-bed-air-chambers-air-leak-repair
Replaced the fitting in air bed with the glue and it worked perfectly. Thanks for the info.
SAVED A TON OF MONEY BY USING THIS FITTING THANKS BRANDEN
Awesome everything you said worked, even soaking with hot water to soften. Thank you Braden for saving me $$$$
My air bladders on Sleep Number 7000 have two nipples, and two hoses each from the pump. Sleep Number sent me a replacement pump with one hose per bladder. I capped off one nipple on the air bladder and attached the one hose to the other nipple. Seems to be working fine. Why did they have two hoses per bladder? Some kind of feedback loop or pressure reduction method?
Ever replace the male connector? The tips on mine have all broken off.
Howdy. On the plastic connector that comes out of the air chamber, the tip of the plastic has cracked about halfway around. This is right where the small rubber O-ring resides. Do you think supergluing the tip of the plastic will work as a long-term solution? Perhaps once dry, I could add an additional thin coat of superglue and let it dry before putting the small O-ring back in place. Any advice about the best way to repair it will be most appreciated.
This is my second Select Comfort bed and I'll not buy a third. They have many cheap parts that are ridiculously expensive and the company doesn't do much to help customers. Thank goodness for people like Air Bed Repair Man who are doing a great service.
Use the M236 Large Hose to repair the broken port, do not try to remove the port because the repair is not as successful!
Here is a quick king to the repair hose for sleep number bed air chambers with a broken port
airbedrepair.com/products/m236-lg-hose-compatible-with-sleep-number-bed-air-chambers-air-leak-repair
@@Airbedpros Ah, this is great! Thank you very much for the information and the videos!
Don’t need “clamp” to secure the connector? One is on there now. Which I think is not doing the job.
How do I know what connector part I need. I have a c2 bed I purchased used and I’m not sure how old it is.
Here is a link to purchase airbedrepair.com/products/f236-connector-for-sleep-number-bed-pumps
Could you give us the measurements of the connectors and hoses? How do get the repair kit?
Just ordered one F236 on amazon for 9.00, worked perfect
That’s NOT pump repair. It’s connector repair. Clickbait.
It’s a pump hose repair!
So your title is wrong!