Valid suggestion, however it's not always possible to stay away from propeller. So I try to ensure my hand is away from throttle, or the throttle cut switch is ON.
Thanks. I was using a 75mah esc earlier, now I installed a 100A castle ESC on it to use a 6x5.5 prop. The speed is massive with this prop. Yet to test the 100A ESC though
Hello - I have mine almost completed. Can you provide the aileron and elevator control throws. How much travel? Also, what is the CG measurement please. Thank you, Mike
CG is 5mm in front of the screws (towards propeller) Elevator: 2.5mm up and down Aileron: 3-4mm, depends on your flying style, best is to have dual or triple rates configured
I havent, but its a very good idea... these planes are very efficient and extremely fast.. should really see how it works out. Dont have any spare DJI O3 though....
@@rcrahul3657 How much is a plane like that usd price, and are any available in the usa. It seems like outside of usa has all the high end carbon fiber fast plane builds only .
Hi Rahul, What is the wing in backround named Voodoo?
@@rickm1041 Hi, that Voodoo is also a pylon racer. It’s slightly smaller than X-ray but a very well designed and same speed, if not faster than X-ray.
When the battery is connected and motor is armed, treat the propeller like a loaded weapon and keep your hands away at all times !
Valid suggestion, however it's not always possible to stay away from propeller. So I try to ensure my hand is away from throttle, or the throttle cut switch is ON.
@@rcrahul3657 I can stay away from the propeller at all times
Great video and explanation. What size esc are you using?
Thanks. I was using a 75mah esc earlier, now I installed a 100A castle ESC on it to use a 6x5.5 prop. The speed is massive with this prop. Yet to test the 100A ESC though
very nice , is its a 3s or 4S set up? watts? amps? AUW?
I updated the description with esc and LIPO setup.
Hello again. Where did you buy your spinner for the motor?
Thank you.
I don't remember clearly but I think I bought those BB Aluminium spinners from espiritmodel
Hello - I have mine almost completed. Can you provide the aileron and elevator control throws. How much travel?
Also, what is the CG measurement please.
Thank you,
Mike
CG is 5mm in front of the screws (towards propeller)
Elevator: 2.5mm up and down
Aileron: 3-4mm, depends on your flying style, best is to have dual or triple rates configured
Thank you so much!!!
What's that spinny thing at the front? :P
Hahaha
Are you from India ?
I am from India, but not in India.
Has anyone put FPV Dji 03 on one as im sure it can fit and mount on top of wing.
I havent, but its a very good idea... these planes are very efficient and extremely fast.. should really see how it works out. Dont have any spare DJI O3 though....
@@rcrahul3657 How much is a plane like that usd price, and are any available in the usa. It seems like outside of usa has all the high end carbon fiber fast plane builds only .