Tick Performance Polluter Cam and Speed Engineering Exhaust Install on RSM's WS6 (Black Sabbath)
Вставка
- Опубліковано 6 вер 2024
- Links:
rock-solid-motorsports.com
tickperformance.com
/ rock-solid-m. .
/ rocksolidmo. .
/ duhastttls
/ black-sabbath-ws6-1004...
I'm sold on the speed engineering exhaust! Sounds great and looks awesome.
It's good but the drone is pretty killer!
Just don't let it lug. Keep in correct gear
Great video! I’ve been working on F bodys since 2009 and I like how in-depth the video was. Most people just skip over the how and why but you make it look so easy. I was impressed you didn’t have to remove the intake, makes things a lot easier. Looking forward to the dyno tune video and future mods. Enjoy seeing these simple builds as everyone goes way over the top and forgets their roots.
Duuuuuuuuuude!!!! Please do the tune sooooooooooon!!!!!!!!!!!!! I have a 2000 that looks pretty identical. I already installed the tick short throw, but that's all that's been done to it so far. She only has 13k on the odom. I've been watching all different kinds of vids on cams and exhaust, thinking I hade at least settled on BBK headers and SLP exhaust. And thanks to YOU...now that's up in the air again. Geesh! BTW, my wife named it BLACK BETTY.
White lowering springs are from Strano Performance. I have the Speed Engineering true duals and XS Power long tubes for my 4th gen, waiting for new engine to be finished, I can't wait.
I can't wait to see it tuned. That's the cam I'm going with.
Came across this video looking for exhaust. Beautiful car and sounds F.....amazing.
I'm so glad you talked about cutting off that piece of the block because I didn't know what to do when I got it.
That cam and exhaust sounds awesome
Super clean black 4th gen stick car. Not jealous
Lumpy cam that sounds killer. Not jealous
Clean true duals install. Not jealous
Was able to extract a rear broken exhaust bolt on a 4th gen with a easy out and was able to smile afterwards. IMPOSSIBLE. IM CALLING BULLSHIT. THE GODS WILL NEVER ALLOW THAT TO HAPPEN hahahaha
Sounds great. It’s usually 50/50 if those manifold bolts come out in one piece. Most of my experience with broken ones are on truck engines. Usually multiple ones on each side and the gaskets will leak like crazy throwing lean and misfire codes.
Steven it will make a difference to the car. I also use NGK spark plugs. There the best for a cammed motor. Always awesome content 👍 Aussie Fan 💯🇦🇺🤣🤟
Love
the pistol in your back!!!
I had Kooks true duals on my car and damaged them, so I bought the Speed Engineering true duals so I could have something until Kooks can make a replacement part, and they are identical. Didn’t even have to swap the brackets.
Same cam that's going in my firebird formula, and im right down the road from yall too
this dude is really working on this car with his 🔫 on him 😆 🤣 😂
I don't even feel it anymore. Years of wearing it's just like a clothing item now 🤠
Nice WS6! They have always been my favorite cars. I would love to get one.
White springs may be Strano Performance springs.
Firearm and Firebird 🇺🇸
I just ordered the speed engineering true dual exhaust for my 95 camaro. I already have the speed engineering long tubes installed on the car. It states its for the ls1 but man i think i can make it fit on the lt1.. Im also running a LE 230/238 584/584 108 LSA CAM with tick 600 springs, ls7 lifters and comp cam NSA roller rockers. I hope it sound good.. I love your car and man it sounds awesome..
Fuckin love the license plate 🤙🏽
Those would be the Strano springs. They're excellent if youre looking to lower the car and not have it ride like a shopping cart.
PRETTY WICKED DUDE!!! great job 👏🏽. Love hearing that cam counting out those cylinders 🤙🏽☺️
Forget the easy outs. I deal with broken exhaust studs all of the time. Just mig weld a nut onto it. You’re able to drill the heat into it during the process and they’ll back right out. If it’s below the surface just build up the weld until it’s barely sticking out then weld the nut on. The heads are aluminum so it won’t stick to them. Much easier than dealing with drilling and easy outs.
Springs are Strano springs. Those are the only white ones I know of.
I have to agree, it’s what’s on my car.
I use a thick flat washer weld it to the remains of the broken header bolt
Then weld a nut an bam
Plus the heat from welding cooks the gotdam glue off they put on them bolts
I had to replace a ton under warrantee at the dealer for poppin off even low mile trucks
And always the end bolts at cyl 7 an 8
Black ws6 club represennt! I'm pretty much going to be doing the exact same thing ina couple of weeks plus heads, full suspension work (sfc, coilovers, lcs,etc) I got the tsp bald eagle boost cam (putting a tvs2300 next year) hopefully the 10 bolt will last till I can change it lol
Now that sound good, love that fast chop some people get chop and Lope mixed up, but they don't know s*** about chop 🪓🤣 that bad boy is chopping I know it's running 🌶️👍
All I can say is WOW... Nice looking system and a great price. Let us know if you have any issues
Perfect in every way!
Love that car
I see alot of f body cars with NC plates lately. Hopefully will have mine together by the summer
Been there done that! Bet your back feels great haha
Sounds wonderful
that sounds badass nice job cant wait to see it rip, id like to see your shop one day, you are just up the road from me here in matthews!
About to do the exact same cam and exhaust on 02 Camaro next week not looking forward to it haha these cars are awful to work on! Great work tho man and thanks for the video
Sounds freaking good 👍
👍🏽🇺🇸👍🏽 looks and sounds awesome
Dang that sounds good
Love it
It sounds good
Sounds good.
Awesome video
Sounds wicked dude.
Thanks for the tutorial
Sounds good to me!
white springs could be Strano's........
Your a bad dude....
What car cover do you have on this car when it's just sitting in the background?
Would here be a problem if I installed this exhaust on a completely stock Ws6?
Nice job MyGuy…it sounds badass 😎 🇺🇸
Did you do a VVT delete?
These models do not have vvt
Brought all your tools to work i see.
NIIIIIICCCCEEEEE
LOL, I'm fighting the last 2 pipes on the driver's side as well, did you cut another notch or just bend the flanges out???
Looks like strano springs
I bought an 02 with this exhaust already installed but it hangs down way more than yours. Wanted to lower it but concerned with clearance issues
My car is lowered. Speed bumps and bridges are not friendly but other than that it never drags
Great sounding exhaust!! What size r the dual tips 3.5 or 4”?
4" I think they are
How do you feel about the speed engineering exhaust after a year of use? Would like a honest opinion before installing. 🤔
When I saw the exhaust, I said loud AF.
Do the headers hit the kmember at all?
where do you get your music ... also what car cover is that your using on the ws6?
Epidemic sound and something about $150 from Amazon I can't remember
Idk what kind of witchcraft you did on yours but even after notching that ear off the block my se headers hit EVERYTHING.. motor mounts, 6bolt ears, body.. every damn thing it’s infuriating
I know this video is old, But did you have to get extra clamps or weld anything down the Rd?
Na. Still rocking it just like it was installed here
@@rocksolidmotorsports7297 thanks
Motion race works just made an tool tht problem
owning a tick polluter v2 myself...... swappin springs in the car every 15k is like pulling your own teeth lol
Why you swapping springs
@@SneakerKidd101 because they get weak after alot of abuse from the aggressive lobe ramp rates
Which polluter cam V1 or V2?
2
@@rocksolidmotorsports7297 That’s my dream car I found a pewter color 2002 ws6 it has a lsx 454 swap 545 rwhp.
Tick performance part numbers?
TPESCPLS16
Guess everyone is different my headers don’t touch the k member
Speed Inc biggest bunch of hacks in the fbody industry tons of horror storys would never let them touch my car glad I do my own work.
lol im still on a budget at 40
Be careful posting street car videos. Epa is watching
For real!
SERIOUSLY? How about some REVS, or even a little DRIVETIME to hear what all that work sounds like?? FAIL!!
Man those stock
Ypipes are shitty af 😂 i hate em