DIY Attached Pergola | Build It Better | EP. 01
Вставка
- Опубліковано 7 кві 2019
- Today I'm building an attached pergola on my back patio! This build is great for all types of weather. It is super sturdy withstanding crazy storms and winds while also giving off a pretty good amount of shade for when you need a place to chill away from the sun. A list of all materials used for the build is below!
Build It Better Merch!
teespring.com/build-it-better/
_____
Miter Saw: www.amazon.com/gp/product/B00...
Drill: www.amazon.com/gp/product/B00...
_____
DON'T FORGET TO LIKE, COMMENT, AND SUBSCRIBE.
Subscribe: ua-cam.com/users/builditbetter...
_____
ADD ME ON:
Instagram: / builditbetter_
Facebook: / build-it-better-386149...
Twitter: / builditbetter_
_____
MATERIALS:
2 6x6x8 Posts
2 6x6 anchors
2 6x6 plastic standoffs
2 2x8x12’s
14 2x6x12’s
28 1x2x6’s
5 inch Structural Screws
4 8” Carriage Bolts with washers and nuts
10 2x6 Joist Hangers
A Gallon of Exterior Wood Stain
A box of 2.5-inch wood screws
A box of 1.5-inch wood screws
¼ inch Tapcon Concrete Screws
_____
#builditbetter #diy #pergola
_____
Thanks For Watching! - Craig Helms - Навчання та стиль
You describe and show how to build a pergola in approximately six minutes, we’ll done.
You didn’t talk about your life, where you grew up, the first time you smelled cedar or the philosophy of a pergola and for that I applaud you.
Didn't talk about how it requires a permit though.
@@philmcclenaghan7056 it doesn’t in most states.
WELL DONE , NOT WE'LL DONE
@@philmcclenaghan7056 PERGOLA'S REQUIRE PERMITS?
Best video I’ve seen on the step by step for a pergola
Perfect. I had been looking for a pergola video on a patio with a roofline on one side and attached to the other wall just like this. Wanted to see how it would look completed. Great job!
This has got to be one of the BEST pergola tutorials on UA-cam, good job!
Hands down the best DIY video I've seen for this. Very comprehensive for the DIYer
Thank you for your videos. I always over think the need of all the fancy woodwork tools to start projects, but you use basic tools and create amazing pieces.
This is exactly how I’m looking to build mine. Thanks for the vid and instructions.
I needed this for my project, thank you for the details!
Bless you.
The fact that you thoroughly explained each step and showed the video reflecting each step you are explaining is why I just subscribed to your channel
Thanks for the confirmation....precisely the plans I drew last week. Nice to see it finished. Good job!
Nailed it. Simple yet elegant!!
Nice job! Customer asking me to build her one. For a first timer this is simple with no frills. Looking forward to get it stared. Thanks
Well done my man! I have a similar project I’m starting Spring 2020 this will help immensely!
Thanks bud!
This is beautiful and easy to do it. My husband is a handyman. I want the same for my house!!
Thank you! You explain it so well.
I'm going to be making this.
Nice video. I had never heard of Deck2Wall spacers so thanks for opening my eyes!
All the other tutorials were good but yours is just the best. I loved the voiceover and all the info provided! Keep up the good work
Thank you for making this video. I built the exact same pergola. 👍
Looks good. Going to use this as a guide for building one next spring.
Well done guys. I am thinking of installing similar to the yours , but dark grey colour
Beautiful & perfect job
- Nice job. Well done. Great family/friends project.
Thank you! At last all my questions answered:)
Excellent video. Thanks for the tips and detail.
well done, sir. Way to enjoy the fruits of you labor....
Nice job guys! Inspired me to build one 👍
Good Job on that Pergola
From the U.K. thanks this was great!!
Best video!! Best explanation! Thanks!
Thank you it’s very nice and God bless you!!🙏🙏
That came out great! Well done! 👍
Guys I am learning woodworking shed plans at *WoodBlueprints. Com* I recommend this website all you guys who are beginner or advance in woodworking
Love it looks great
Again! Great video!
The house we’re working on looks just like yours. Going to check out your channel to see if you’ve done any inside remodeling for ideas!
this is pretty neat., I recently did a modern one for my house
amazing work, thank you and very basic,
It looks awesome, thanks
Excellent job well done
👍🏼 keep going
I felt euphoria watching this. I will start doing something similar.. Pray for me to be perfect. 😬
Followed this video. Mine turned out great!!
Looks great Creg 👍👍
GREAT job. Thanks
Looks great 👍
Es un video que te ayuda despejar dudas como hacer una pergola sin tantas complicaciones
Great job 👏
Looks good!
Nice work!
Saludos amigó desde Tehuacán Puebla México 🤗🤗🤗🤗👍👍👍👍👍👍👍👍👏👏👏👏👏good
great job looks fantastic
interesting points ,if anyone else trying to find out backyard storage sheds plans try *WoodBlueprints. Com* Ive heard some decent things about it and my colleague got cool success with it.
Thanks for this video and explaining every step. I've shown this to my brother(cause I want to set up the same pergola) which works in this field and mentioned the support for this isn't great in the long run and for our situation due to the weather the cement freezes which would cause the pad to move more than the house that might cause the base of your post to get loose or cause cracks in that section. If you live in an area where there's no freezing temperatures you'll be fine, if not keep a look out over time. Thanks again.
Great job bro ! 👍
Good job...👏👏👏👏
Great job
Now I need tools, supplies and skills like yours! 😂
Love it!
Awesome Job!. This is something I would love to add to my backyard. Would staining the board against the house before install make it easier? just curious of how you got to it after install.
Awesome!!
Awesome build man, it's helping me a lot to design and build mine. How is yours holding up so far? Anything you would do different or have added?
Good job buddy!
beautiful job son !!only thing im not keen on the hangers they take away that look but still nice work !!
Fantastic brav ... thx
Nice Job guy's
Good Job.
Good job👍👍👍👍 From maroco ❤
Good job
This might be the best pergola video I’ve seen - simple with great video documentation. TY!!!
And I love that u show how to deal with moisture & rot at the attachment points. Most don’t, which is completely nuts.
BUT… u didn’t show/explain if/what u did for the decorative skirts at the bottom of the posts. If they make contact with the ground, any moisture will likely wick form that into the post & eventually rot both.
Pls lmk.
Craig?
Quick question. How do you look after your wooden hot tub? Mines starting to rot a bit. Thanks for the excellent video.
I like it.
Great video! How's it holding up a year later? Do you get a lot of rain water near where it is attached to house?
Thanks for the video frien. I have a question, how much did you leave btwn rafters
Now just put large shrubs on the outer edge of the slab to create a natural blind. Nicely done.
good build
You did a beautiful job! For the shad rafters, do you recommend 2x4 or 1x3?
How did you secure the ledger to the exterior of the house with the spacers included? Did you leave 1/2" of exposed screw between the ledger and siding when drilling all the way into the siding?
Hey Greetings from POLAND, great video ;-)
Your shed looks great! Thank you for sharing your knowledge with us! I built an 8x10 shed for my kids in my backyard earlier this year using plans I got from *WoodBlueprints. Com* Clear directions and an accurate materials list...It was great for a novice builder like myself!
great job and great instruction. my question is , did yours have a slight slant at the top. Seeing that the joist hangers near the house were inside , yet at the end of the joist beams you notched them to only go down one inch ( near edge of patio) ... how does that equal a straight line? Im confused?
Nice
What over hang did you use for the 2x6s? Great project!
Hi Nice job ....Wondering how you made sure that the ledger board on the house was square with your posts before you installed the concreter anchors? Thanks
Great build! I am actually looking for a simple yet elegant design and this one just nailed it.
How much give or take the project cost?
This build cost roughly $450 in materials
@@BuildItBetter Looks great, question. Did you have to present a design to your building department? No need to answer, just wondered if you used an engineer. Thanks .
@@rocky48ish ya lost him...
@@mikedaze9322 lmao!
This is pretty good build video, quick and concise.. just a word of note: you really should not use screws in joist hangers, screws simply do not have the shear strength that the appropriate nails are designed to have.
Hey Man, I am doing a Pergola based on this design, cause you did such great job. What is the measurement of your concrete slab? Mine is 14x10.
How exactly did you screw the joist beams into the support beams? Did you drill straight down from the top? How long were your screws?
Thank you
Nice!
$
The pergola looks great!! 👍🏻 How much did you spend I materials?
Planning on building the same project however I am planing to cover it. How long should I leave the downfall angle?
Great video, new subscriber 😊
Great video and they are all fabulous, but where did you go? You were going to put out a video every week.
What type of drill bit did you use to drill through 6x6 posts and 2x6 support beam? Thanks
Did you just use a standard stud finder? I’ve had issues locating with thicker siding. Any tips would be appreciated thx
I have a question, you mention something in regards of the Deck to Wall Spacers. About having to stagger the spacer, having one in the bottom and one on the top of the 2 by 6. What do you mean by this. PLEASE I'm about to start my pergola this weekend. Do you mean they have to be on the same side but some lower and other on the top part of the wood?
Can some explain how to notch the top joist to keep the pergola flat. Does my ledger board need to be higher than my support beams to make up for the notched joist?
How high is the ledger sit on the exterior wall compared to the the 2 support beams in the front?
Loved the video, I’m building one just like it, based on your build. I wanted to know What the size of the notches were on the 2x6’s and also, how did you determine the height of the 2x6 that was mounted to the house? What was your measurement reference to allow the 2x6’s to rest against the house and at the same time have the notched end of the 2x6’s slide into the support 2x6’s and still be level all the way across?
Let me know if they answer your question 🤔
Looks great! What kind of wood did you use?
Lol great ending
Great video!! So i am curious, how much did you spent on material ?
Excellent video. Do you happen to offer plans we can purchase in pdf?
What type of wood did you use, and did you use a pressure treated leadger?