Great job with what you had to work with! I have a Cosmo .48 yard PTO mixer on my 50hp Bobcat mounted on a quick attach 3-point. With my 20x31 top link, I can get it higher for mixing and lower for pouring. I do leave the 3 point all the way up at all times though, better range of motion on the tilting that way.
Great for projects that use 3 bags, like fence posts, maybe not so good for multi load pours like flat work. very nice real world demonstration and video
Hey Ty Thanks buddy! Trying to upscale my game🤣😂 Thanks for the view! One step closer to winning the toaster oven 😅 Shouldn’t you be hunting or something? Cheers buddy!🇺🇸🚜
Hey Mike, great video. Don't think I had ever seen a 3 point mixer in use before. Definitely saved the back a bit from having to mix it by hand. Being able to dump better would definitely help. They make a top link adapter which would add some length to the top link. Not sure if it would work, may be too long. But if it would work, might give you the extra length needed to fully dump. Just a thought. Enjoyed the video.
😅Hi Jeff! Roger that! An extension would have been good. It took a week for me and my buddy to connect, so when we did, I was eager to get it done. I probably should have tested things first more thoroughly. I had not seen a mixer either. Thanks for stopping by! Take care- have a good week!!🇺🇸🚜
The finished project looks good. I'm not sure the mixer would be worth it to me, looks like too much effort and danger over a small electric mixer. Thanks for the video
Hi There! Yep! There sure is…. Nice and edged all sides, but as I mentioned this wasn’t about the concrete work😂🫣 Thanks for checking out the video, I appreciate it! Cheers🇺🇸🚜
No way I would shovel it out. I would figure out the geometry on getting it to turn while dumping or just get one for front end loader that works off the lines.
Piece of crap. Considering it's also made from 100% pre mix. Anyone should be able to mix and screed a small slab that size with agg, sand, cement, and mixed in a barrow
@666bruv Thank you for watching the video and sharing a comment. I really appreciate you taking the time to offer up some specific information about the project. God bless! 🇺🇸🚜
Great job with what you had to work with! I have a Cosmo .48 yard PTO mixer on my 50hp Bobcat mounted on a quick attach 3-point. With my 20x31 top link, I can get it higher for mixing and lower for pouring. I do leave the 3 point all the way up at all times though, better range of motion on the tilting that way.
Hey there!
Oh wow! Nice! Sounds like you have figured it out! Thanks for checking out the video and commenting. Happy thanksgiving 🦃 God Speed!🇺🇸🚜
Great for projects that use 3 bags, like fence posts, maybe not so good for multi load pours like flat work. very nice real world demonstration and video
👍Excellent point! I agree, moving through a field doing holes would be a good fit. I appreciate you checking out the video and commenting. Cheers!🇺🇸🚜
Turned out good Mike. Does look like a longer Top Link would have helped. Live and learn
Hi Bob! Yes, that definitely would have helped. We got her done. Cheers buddy!
Turned out good Mike!!
Hey Jeff!
Thanks buddy! I am not a concrete guy, but it will work. I don’t remember getting this sore a few years ago 😂😅 🇺🇸🚜
Great video! Nice editing, split screen, female voice drop! Overkill, no such thing!
Hey Ty
Thanks buddy! Trying to upscale my game🤣😂 Thanks for the view! One step closer to winning the toaster oven 😅 Shouldn’t you be hunting or something? Cheers buddy!🇺🇸🚜
@@tractorrookie I should be hunting! I'll be in MT in a couple weeks, Lord Willing!
@KingsOutdoorLife excellent!
Hey Mike, great video. Don't think I had ever seen a 3 point mixer in use before. Definitely saved the back a bit from having to mix it by hand. Being able to dump better would definitely help. They make a top link adapter which would add some length to the top link. Not sure if it would work, may be too long. But if it would work, might give you the extra length needed to fully dump. Just a thought. Enjoyed the video.
😅Hi Jeff!
Roger that! An extension would have been good. It took a week for me and my buddy to connect, so when we did, I was eager to get it done. I probably should have tested things first more thoroughly. I had not seen a mixer either. Thanks for stopping by! Take care- have a good week!!🇺🇸🚜
Don’t know till you try it 👍
Very true my friend! Cheers!🚜🇺🇸
Should have called me over. I would have been happy to add a set of hands.😊
I actually didn’t expect all the little challenges. Next time I will, if there is a next time!😅😂
The finished project looks good. I'm not sure the mixer would be worth it to me, looks like too much effort and danger over a small electric mixer.
Thanks for the video
I hear you! That was kinda my feeling. I appreciate you checking it out. Take care!🇺🇸🚜
No expansion joints against existing concrete ?
Hi There!
Yep! There sure is…. Nice and edged all sides, but as I mentioned this wasn’t about the concrete work😂🫣 Thanks for checking out the video, I appreciate it! Cheers🇺🇸🚜
Thanks for the video. I think I'm going to pass on the mixer.
Hey there!
I hear you! I think certain applications it might be a good fit. Thanks for checking out the video! Cheers!🇺🇸🚜
No way I would shovel it out. I would figure out the geometry on getting it to turn while dumping or just get one for front end loader that works off the lines.
Hey Clyde,
Thanks for checking out the video and commenting. Merry Christmas & Happy New Year!
God speed! 🚜🇺🇸
Piece of crap. Considering it's also made from 100% pre mix. Anyone should be able to mix and screed a small slab that size with agg, sand, cement, and mixed in a barrow
@666bruv
Thank you for watching the video and sharing a comment. I really appreciate you taking the time to offer up some specific information about the project. God bless! 🇺🇸🚜