Hi i am using ramps and lcd with my homemade cnc in same way but i have a problem when i store leveling data to eeprom and activate the bed leveling i send g1 z0 commande to go to zero z but it given me the wrong calibration, i must send m851 z0 ?
Τι να πω! Δημιουργείς μια φοβερή βιβλιοθήκη για όλους εμάς τους καμμένους που ακούνε cnc και φωνάζουν"που ειναι;" Που θα πάει, δεν θα το φτιάξω; Ηδη κατέβασα το φιουζιον 360 σήμερα! Μακάρι να μπορούσα να γραφτώ και δεύτερη φορά στον Σάκη! Φοβερό περιεχόμενο-πιεσέ τον!!
Να εισαι καλα φιλε Δημητρη! Θα το φτιαξεις εννοειται! Απο το να μαθεις το fusion για την ακριβεια, το να φτιαξεις το μηχανημα ειναι δυο φορες πιο ευκολο κατ' εμε 😁
καλησπερα Σακη.οταν τρεχω τις αλλαγες σου για το bed leveling στο configuration.h μου βγαζει το παρακατω error καμοια ιδεα? #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING.
здравствуйте . подскажите пожалуйста, можно ли в прошивке марлин активировать функцию ,как запоминания последней сроки ,или координат, в случае отключения электричества . или может в g коде установить команду для записи последних строк, на sd карту ., Hello. please tell me whether it is possible to activate the firmware marlin, like remembering the last time frame, or coordinates, in case of power failure. or may in the g code set command to write the last lines on the sd card.
Hey Ari! And sorry for the late reply.. You can use pretty much any bit! But in theory the smaller the tip of it the better the accuracy I suppose... Cheers!
what I have wondered in the other video already: you'll always just adjust the z-hight and therefore your angles (endmill to surface) won't be the same everywhere. once your depth of cut towards the z-axis increases you'll start to notice more and more. It's alright vor v-bit carvings, I suppose. I think that's why people do surfacing paths (with big endmills)!
True that! In fact this aproach is used to compensate for very small imperfections on the machine's bed... I may overdid it a bit just to prove the point! But for critical dimensioned parts, this would not be an option I 'm afraid. You could use this on more cosmetic operations though, or even v-carving/engraving on complexed surfaces! Cheers Tom
Cool addition to your 3D printer / CNC machine. :-) I was thinking it would be trivial to make a small attachment that clips to the tool and drags the metal spacer around and pushes it to the bed with a weak-ish spring, that way the only thing you would have to do is zero the tool, attach the spring holder and block to the tool and hit go. :-)
Thanks Morten! I do like your approach! There are switch based probes you can buy on the market and not have to move anything arround, but it is very simple to make it the way you suggested. Thanks!
@@ZepLabs right noe im trying with grbl controller, and since this video im trying with Autoleveler and Mach3 but im cant get mach3 to move or connect with mi cnc 3018, probably port issues, im still trying
Signal και ground τα χω εγω φιλε Χρηστο. Νομιζω και ολα μου τα endstops. Αμα θες το δουλευεις και με το Vcc ομως. Εχει να κανει με τις ρυθμισεις σου στο Marlin και αμα τραβας το signal απο high σε low η αναποδα. Αν δεν κανω λαθος, απο default, με signal-ground εισαι οκ ( high to low)..
As nobody seems to want to face this, head-on.... I can also agree with what others note... You are "handy,.... man". Jus saying.... no diss intended,... well, only to your Arduino addiction, anyway. That kinda freaks me out. lmao !!
Ok, I did subscribe to your cousins channel. Content seems okay on first glance but these Musik-Videos are really not for me, maybe if he comes back you could nudge him to talk on his videos?
Also.... your base plate ...could easily be negated.... and your bed water-resistant.... just simply white glue a sheet of tinfoil or aluminum foil on to it.
That is super cool. Your some sort of mad cnc scientist.
Hi i am using ramps and lcd with my homemade cnc in same way but i have a problem when i store leveling data to eeprom and activate the bed leveling i send g1 z0 commande to go to zero z but it given me the wrong calibration, i must send m851 z0 ?
Τι να πω! Δημιουργείς μια φοβερή βιβλιοθήκη για όλους εμάς τους καμμένους που ακούνε cnc και φωνάζουν"που ειναι;"
Που θα πάει, δεν θα το φτιάξω; Ηδη κατέβασα το φιουζιον 360 σήμερα!
Μακάρι να μπορούσα να γραφτώ και δεύτερη φορά στον Σάκη! Φοβερό περιεχόμενο-πιεσέ τον!!
Να εισαι καλα φιλε Δημητρη! Θα το φτιαξεις εννοειται! Απο το να μαθεις το fusion για την ακριβεια, το να φτιαξεις το μηχανημα ειναι δυο φορες πιο ευκολο κατ' εμε 😁
Μου άρεσε να παίζω με το autocad παλιά (πολυυυύ παλιαααά) και αυτά τα δυό έχουν πολλά κοινά απ' ότι παρατηρώ! Ευχαριστώ για τη βοήθεια!!
Hi . You would be so kind to tell me how you have managed to achieve the autonomic level. thanks
Love your stuff man. Keep it up and best of luck with your channel. I subscribed to your bro's channel. You're right, he does some good stuff.
Thanks Dale! For all! 🍺
How did you set up the probe hight. marlin had to know the width of the metal block
hello, to which pins of the Ramps 1.4 do you connect the 2 wires of the probe? thanks. (google translator)
What is your controller board type?
Friend excellent video, I have a question in which pins of the Ramps 1.4 do you connect the level sensor?
καλησπερα Σακη.οταν τρεχω τις αλλαγες σου για το bed leveling στο configuration.h μου βγαζει το παρακατω error καμοια ιδεα?
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING.
Hello, How to add the spess of the metal wedge in the Gcode to have zero? A G92xxx code?
Thanks Zep.
can we get an answer on this? where do we put the thickness of the plate?
I never got a response from Zep, or anyone else ... too bad.
Why don't you use a simple homemade 3d touch probe, like on big cnc machines?
its a good video, i am using Marlin 1.1.9.1 for cnc/3d printing but ABL bilinear not working...can u help me what should i do...
Sorry to hear that. Is everything ok in your configuration.h file? I 'll maybe have to take a look there in order to help!
@@ZepLabs thanks for ur cooperation..give me ur mail id or tell me other way i can send configuration file...
you can find my mail adress on the channel here!
здравствуйте . подскажите пожалуйста, можно ли в прошивке марлин активировать функцию ,как запоминания последней сроки ,или координат, в случае отключения электричества . или может в g коде установить команду для записи последних строк, на sd карту .,
Hello. please tell me whether it is possible to activate the firmware marlin, like remembering the last time frame, or coordinates, in case of power failure. or may in the g code set command to write the last lines on the sd card.
Perfect ❤
Hey mate, can u help me. Where did you connect the probe pin? Zmin endstop pin? And how can I active it on marlin ?
Hey there! Missed this one. Did you figure it out??
What bit are best for levelling bed?
Hey Ari! And sorry for the late reply..
You can use pretty much any bit! But in theory the smaller the tip of it the better the accuracy I suppose...
Cheers!
Ώραιο Sakis !!. Μπορούμε να έχουμε τον gcode που παράγει το marlin , μήπως φτιάξουμε κάτι αντίστοιχο για το mach3 ???
what I have wondered in the other video already: you'll always just adjust the z-hight and therefore your angles (endmill to surface) won't be the same everywhere. once your depth of cut towards the z-axis increases you'll start to notice more and more. It's alright vor v-bit carvings, I suppose.
I think that's why people do surfacing paths (with big endmills)!
True that! In fact this aproach is used to compensate for very small imperfections on the machine's bed...
I may overdid it a bit just to prove the point! But for critical dimensioned parts, this would not be an option I 'm afraid. You could use this on more cosmetic operations though, or even v-carving/engraving on complexed surfaces! Cheers Tom
Cool addition to your 3D printer / CNC machine. :-)
I was thinking it would be trivial to make a small attachment that clips to the tool and drags the metal spacer around and pushes it to the bed with a weak-ish spring, that way the only thing you would have to do is zero the tool, attach the spring holder and block to the tool and hit go. :-)
Thanks Morten! I do like your approach!
There are switch based probes you can buy on the market and not have to move anything arround, but it is very simple to make it the way you suggested. Thanks!
We've always called them alligator clips.
Im trying to auto level a cnc 3018, can you give any suggestions pls?
Hey Jorge! Depends on your controller's firmware..What are you using??
@@ZepLabs right noe im trying with grbl controller, and since this video im trying with Autoleveler and Mach3 but im cant get mach3 to move or connect with mi cnc 3018, probably port issues, im still trying
Good job,, auto levelling i will learning this,,
Thanks Lafu!
I didn't know you was related to sakis I follow him already. So I subbed then subbed again. 😁🤔
I guess it's an approach! 😂 Cheers bud! See you Sunday
Αγαπητέ... Που συνδέεις τα probes ακριβως; σε signal και ground? Ή σε signal και +5v?
Signal και ground τα χω εγω φιλε Χρηστο. Νομιζω και ολα μου τα endstops. Αμα θες το δουλευεις και με το Vcc ομως. Εχει να κανει με τις ρυθμισεις σου στο Marlin και αμα τραβας το signal απο high σε low η αναποδα. Αν δεν κανω λαθος, απο default, με signal-ground εισαι οκ ( high to low)..
4 years old video no captioning how can i under stand what you said about it
Slick! :o)
Thank you sir!
As nobody seems to want to face this, head-on....
I can also agree with what others note...
You are "handy,.... man".
Jus saying.... no diss intended,... well, only to your Arduino addiction, anyway.
That kinda freaks me out.
lmao !!
Vaping arduino flavour as we speak..😁
Have you got shed envey with you cus ? ? Huh
😁Naaah! I m just trying to get gim back in there!
κροκοδειλακια -> alligator clips
Thanks for that!
Ok, I did subscribe to your cousins channel. Content seems okay on first glance but these Musik-Videos are really not for me, maybe if he comes back you could nudge him to talk on his videos?
Understood! Thanks anyways Sasha! Will let him know 🍺
Alligator Clip ... Oui ? Si ? Hai ? Ja ? Da ?
Also.... your base plate ...could easily be negated.... and your bed water-resistant....
just simply white glue a sheet of tinfoil or aluminum foil on to it.
This approach was made with mostly pcb milling in mind! I think I m gonna adjust a microswitch on a broken tool for the wooden stuff! Cheers buf
Money duplicator 😊
😂 Yep. After this invention, he s duplicating money all day long I guess...