Budget DIY CNC Plasma Table Build | Part 4 - Y-Axis Drive System
Вставка
- Опубліковано 21 сер 2024
- I finally decided to build a CNC plasma table...I want to do this on a budget, so I will be using as much material that I have on-hand as possible, and hitting up the local scrap yards to see what I can use...The Y-Axis Belt Drive system gets designed!
VW Beetle Videos:
• 2001 VW Beetle
D100 Videos:
• 1975 Dodge D100
Charger Videos:
• 2017 Dodge Charger
DIY Projects:
• DIY Home Projects
Shop Projects
• Shop Projects
Fitness Videos:
• Playlist
You can always find me here:
Webpage: www.wjm-indust...
Facebook: / wjm.industries
Instagram: @Moonbuilt
Twitter: @BuiltMoon
MoonBuilt Garage Merchandise - T-Shirts and More:
/ @moonbuiltgarage
Tools Used For This Build:
- NEMA 23 Motors Amazon amzn.to/3VzQHYB
eBay ebay.us/2SO7uC
- Motor Brackets Amazon amzn.to/3s3wA7s
eBay ebay.us/C2f3xB
- 5mm CNC Belt Kit Amazon amzn.to/3TxOD1m
- Timing Pulleys Amazon amzn.to/3MIi8v7
What I Use To Film:
Canon EOS M50: amzn.to/3aRNRbw
DJI Osmo Action: amzn.to/3aR2E6x
Zhiyun Smooth 4 Gimbal: amzn.to/2YKrkto
Rode VideoMic Me-L: amzn.to/3pUx1RI
Rode VideoMicro: amzn.to/3nBqFng
Rode Wireless Go Wireless Lavalier: amzn.to/2RoROO3
Vijim LED Video Light: amzn.to/3gW5mLV
Thronmax MDrill Zero Microphone: amzn.to/2ZR23cK
AmazonBasics 60-Inch Lightweight Tripod with Bag: amzn.to/2ZxEVzP
Vastar Smartphone Mount: amzn.to/2NE5JMp
Affiliate Links:
Amazon - amzn.to/3j769Zo
eBay - ebay.to/3CE3bo4
OpenBuilds Parts Store - bit.ly/3Vwm7Pp
Jegs - jegs.ork2.net/...
Printful - bit.ly/3pSuebT
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! All opinions are my own and presented without editorial input from outside sources.
Disclaimer:
Due to factors beyond the control of MoonBuilt Garage and WJM Industries LLC, we cannot guarantee against improper use or unauthorized modifications of this information. MoonBuilt Garage and WJM Industries LLC assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. MoonBuilt Garage and WJM Industries LLC recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of MoonBuilt Garage and WJM Industries LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MoonBuilt Garage or WJM Industries LLC.
Music Provided By: elevatedjamtra...
Produced and owned by WJM Industries LLC
#MoonBuiltGarage #cncmachine #plasmacutting #DIY #howto #storage #storageideas #storagesolutions #woodflag #americanflag #rusticflag #woodshop #garageshop #shopideas #workshop #tools #maker #woodworkingtools #tooltip #woodworkingprojects #garagelife #garagefun #garagenight #builder
You can see at min 8 the belt tension is bending the rollers couse they are too far up, Swap the pinion on the motor shaft upside down, this way your belt will be near the motor, you wont be needing spacers for the rollers, only a washer.
I'll take a closer look at that..thanks
I been wanting to buy a table and all of a sudden I am watching DIY builds. Langmuir was the cheapest table at about $3700 shipped for a 4'x3' area. I don't mind building my own table just will take me longer to do research to build a 4x4 or larger platform.
That's exactly why I started building mine....im not in any rush, so the cost savings and learning while I figure it out is worth more to me than buying one
Precicion Mr???