DIY Making Easy Circle Cutting Jig for Jigsaw
Вставка
- Опубліковано 22 січ 2020
- This time I made a circle cutting jig for a jigsaw only with 3 items, a piece of scrap wood, the existing pararell guide and a positioning pin.
This jig allows you to cut roughly up to a circle of 70ｍm diameter. You can still use it as a parallel guide by flipping the guide.
Jig plan convenient for woodworking
[Plan List]
jsk-koubou.stores.jp/ - Навчання та стиль
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
I admire how you modify the existing guide in such a simple, straightforward manner.
That looks like a very serious jigsaw! It appears to be about twice the size of the one I struggle with.
I guess one takeaway is that all of the carefully constructed jigs and stands in the world are not going to be much use if they're used with inferior tools.
This channel is truly a delight. A combination of imagination and careful attention to detail. Every video is enjoyable and instructive.
Thank you for doing this.
Another great time saver! Awesome! Now I'm going to have to find my parallel guides because I've never used them. Didn't really know how until now. Thank you
A lot of the time I watch your videos just loving the precision and thought that goes into the design, and how you manage to create tools that go far beyond what I would have considered practical, until you shows how to do just that. This time however I watch this an very quickly realized that this was not going to be a wonder of design and fabrication, but rather a quick and easy way to adapt a tool to do something you actually often need. And I love that too! While not as intricate as say the circular saw slide guide, this circle cut jig does exactly what it needs to do, and it didn't take a lot of time to make, and it can easily be undone taking out two screws if needed.
Thank you for making these videos showing how to improve the tools we've already got.
The idea is not new and the idea is not his. Read the comment above.
@@rocketsland9539 I never said it was either of those. Just that I appreciated this video even though it's not as elaborate or advanced as some others. Sometimes it's nice to see an easy and quick solution executed well. It reminds us that not everything has to be advanced.
@@blahorgaslisk7763 ты ещё молод, глуп и ничего не видел!
I made a plywood version of this. If the pivot is out of square with the blade, then the blade travels. Blade behind the pivot (out of square "acute"), the blade traveled inward until it bound up. Blade ahead of the pivot, the blade traveled outward until it bound up. Only when I got the pivot hole(s) in PERFECT SQUARE with the blade would it travel straight. I have a Ryobi corded jigsaw.
Excellent job on modifying the factory made jig into a great jig.
Thanks for sharing
Nice! A few weeks ago I made circle cutting jig on my table saw but this is also a great way of making circles. Well done!
A great simple to make guide adapter, something I need to make because I struggle cutting circles out, thanks
Beautiful work, dude! Really well done! 😃
It really works great!
you are number one of the tutorials...
Recurso, rápido, fácil, simples e muito eficiente. Parabéns por compartilhar.
Congratulations for you!
You are the best!!
Perfect Job, Good brainwork results in a nice and usefull jig.Thanks, Robert.
You have great talent !!!
Gonna try this one and today on my birthday awesome. Thank you.
This jig is very helpful. Thank you
素晴らしいアイデアを有難う御座いました。
鱗から目が落ちる様で、、、、遣って観ます。
Nice idea now I can make speaker rings .less noise then a router thanks again
excelent idea. congratulations! Thanks for sharing.
Excelente idéia! Vou fazer uma ferramenta dessas também! Obrigado por compartilhar conosco.
Amazing idea,simple way to solve problems!Great job!
Finally, a use for the guide.
Hi, well thinking, you make it easy, from Oran, Algeria.
Gracias por el aporte y vídeo,como siempre excelente trabajo....buenísima idea....
Молодец, отлично!
Thx a lot. Just built one for myself. Will try it out in next days. Greetings from Germany 🇩🇪.
Semplice ma geniale, bravissimo 👏 👍👍👍👍
very gentle... slow.. and easy to understand... good job bro...
Fabuloso, increible, sin ningún rompe cabeza muchas gracias por darnos la demostración desde Puerto Rico.
Very good job.
Thanks for sharing.
Super. Eline sağlık. Çok teşekkür ederim.
Very good! thank you
Super 👍
Super smart!! Thank for share.
Thank you!
Beautiful work
Excelente idea. Muchas gracias. Es la idea que más me gustó de las diferentes que he visto.
Super!👍🙂
Sensacional ! Very Nice !
Good idea! Thx!💪
Pretty cool.....nice one 👍👍👍👍💪😃
Vc é muito inteligente e caprichoso garoto .... parabéns ....
Very clever idea
Nice Jig. Good Job. Thanks for sharing. ;-)
Nice, it's make more easy 👍👍👍
Muito boa a solução.
You Get ohter subicribe just now !!!!
congratulations for you , your job is amazing
فكرة رائعة 👏👏👏👍👍👍
素晴らしい！
It is a good idea..very smart ,thank you
ビデオがお役に立てれば幸いです。
色々公開しているので他の動画も見ていただけると嬉しいです。
@@jisakukobo ok
👍nice
Really amazing.
This is great! I will create one this weekend :-)
Muito bom muito obrigado Nice job thank you very much
simple and nice 👍
VERY GOOD.
Спасибо. Рабочая штука!
You are one of the best in diy woodworking. I think this video is not your level.
Amazing!
Great 👍
Very nice
Saudações em Cristo - Brasil - Rio de Janeiro - Like 753 é meu.
Bravo!
Отлично придумано!
good job
Does your jig saw blade cut on the up stroke or the down stroke? There seem to be a lot of jagged fires on the edge of the resulting circle. Clever jig.
nice job
Молодец круто
Aprecio muito seus trabalhos.
Laek mendan 👍🤗🇰🇬
Çok yaratıcı. Kutlarım.
Excelente
👍👍👍👌
Хорошая идея!
Thanks for the video, I made myself the same one, but my file when cutting comes out from under the middle of the wheels, tell me what to do.
GOOD😘😘😘😘
👍
Prima Tool 👍⭐⭐⭐⭐⭐ beste Grüße von Bergflitzer.foto Dieter 📸
👍👍👍
👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏
Just drill a long screw on the long rod?
👍👍👍✔
いつも素敵な動画、楽しみにしています。別件ですが、ドリルスタンドを作成中で、動画中ハンドルの上下に連動する様に見える、黒っぽい部品が何かとっても気になります。パネルソーの時に使われていたカウンターウエイトみたいなものでしょうか？
よく見ていますね。
ドリルを大型のタイプに交換したのでカウンターウェイトが必要になったのです。
最近追加したパーツです。
@@jisakukobo ありがとうございます。参考にさせて頂きます。
Jim Armitage: 27.01.2020 : Simplicity is very often the path to Efficiency, in this Case Simplicity Wins to perfection well done.
AWESOME jig, instruction, and video production -- as ALWAYS!
Pardon me, however, for catching a typo in the video description ( blame it on my years of translating and editing..):
Change 70 mm to 70 cm as the maximum diamerer capacity of the circle cutter.
As always, I literally enjoy watching your videos and I tell my friends it's like watching a wizard or a magician-- totally mesmerizing!
70 mm equates to 7 cm seems right considering the length of the parallel guide. i have never found a parallel guide measuring 70 cm (equating to slightly more than 2.25 feet) in length.
me: he drill that plywood direct to nice table..
later me: that is the floor😅lol
Hello, please tell me what drills you use for drilling holes for screws on 3:33.
Did that guide come standard with the jigsaw?
This guide is a jig equipped on a circular saw.
Circular saws and jigsaw guides were interchangeable.
Чистый рез)
You need a Bosch plywood blade!
Автору однозначно зачёт. Вопрос к производителям инструмента. Почему такие простые решения они не находят? Или один блогер умнее всех технарей компаний?
Виктор, моему лобзику "Фиолент" лет 20 !!! Докладываю: в наборе лежал прут со штырём под 90 градусов ( подразумевался циркуль ) а с другой стороны была резьба и в наборе была пластина с отверстием. Снимай циркуль, надевай пластину, закручивай гайку на 6 и вот тебе линейка.. НО !! Сделано так хлипко и бестолково, что я этим ни разу за 20 лет не пользовался. ( у автора видео в подошву лобзика вставляется полоса, а в моём варианте прут на 6 мм с резьбой и 150 мм .. ) Тут жесткость как минимум в 2 - 2,5 раза больше чем у меня. Так что идею сплагиатили скорее всего и довели до ума. И коё в чём ты прав- неужели на заводах нет башковитых мужиков ? Это обычному домашнему мастеру могло прийти в голову, а почему в К/Б заводов никому это в голову не пришло ? По 40 - 50 лет мопеды, велосипеды, мотоциклы, машины имели точно такой вид как и при первой партии.. Сука, 50 лет ни единой детали не меняли. Такая долбанная страна... а, и так сойдёт...
Victor, my Fiolent fret saw is 20 years old !!! I report: in the set there was a rod with a pin at 90 degrees (a compass was meant) and on the other hand there was a thread and in the set there was a plate with a hole. Take off the compass, put on the plate, tighten the nut by 6 and here's the ruler for you .. BUT !! It was made so flimsy and stupid that I have never used it in 20 years. (for the author of the video, a strip is inserted in the jigsaw sole, and in my version a 6 mm rod with a thread and 150 mm ..) Here the stiffness is at least 2 - 2.5 times greater than mine. So they probably plagiarized the idea and brought it to mind. And what are you right about, are there really no brainy men in the factories? This could have occurred to an ordinary homemaker, but why didn’t it occur to anyone in the C / B factories? For 40 - 50 years, mopeds, bicycles, motorcycles, cars had exactly the same appearance as in the first batch .. Bitch, 50 years did not change a single detail. Such a fucking country of the USSR. Dick works with him. Design, convenience? - No, let the capitalists do it for ourselves, we will work on such a ride, ride on such a ride, use it as is. And so they lived ..
Этот автор - мастер золотые руки, женщина японка. Ни на одном видео не показывает свое лицо , но маникюр и розовый лак на ногтях явно указывают на это. Аккуратная, изобретательная, трудолюбивая. Одним словом - редкая умница. Не чета многим рукожопым мужикам (не важно из какой страны !)
@@olegivanov5063 нихерасеунеёзапястье! алакголубоватыйёпта!
Mantap
いつも楽しく拝見しております。
小生、ただいまパソコンケースのサイドパネル（アルミ製、板厚1.8mm程度）を四角く切り抜くことを考えているのですが、極力パネルが歪まないようにするにはどうしたら良いか、方法が思いつきません。もし、良い方法をご存知でしたら、何らかの方法でアドバイスいただけませんか？
因みにくり抜いた後、アクリル板を付けて中が見えるようにしたいので、各辺１5mm程度残して大きくくり抜きたいと考えています。今のところ所有している使えそうな工具は、電動ドリル・インパクタ、タックライフ製のミニルーターです。
pease insert video for making diy mini lathe ...... tanks
Estás escarallando una maderas cojonudas...
Saudações em Cristo - Amigo sou subscrito e com sininho ativo. Os seus vídeos são maravilhosos e aprecio muito a limpeza do local . Parabéns. Uma sugestão : Para os vossos vídeos ficar nota 9,9 seria necessário que o amigo coloca-se o plano de corte (medidas) ajudaria muito a um iniciante ou um idoso igual a mi. (71 anos). Pense nisso. Sucesso e continue a nos presentear com a vossa arte. Muita paz em vosso coração. Amém.
😠😴😨😉😉😈😆😕😮👜👡👙👓👙👓💳👛💄👑👕78.
0
👏👏🖒🖒
Silent movies in December 2020 ... only on UA-cam 🤷🏻♂️
Ya, sí, OK, pero, si lo que se pretende es aprovechar el círculo (SIN AGUJERO), ¿Como te lo montas?
Solo es una simple pregunta....
At 4:50 I said "NIIIIICE!" out loud
me too!