Now you get to add two cans of 32, two cans of 454 and a giant fire extinguisher. The little red flammable stickers you have to put on your truck are going to look real nice also.
For 18 years always had the Chevy Express models so this transit takes getting used to but love the space when on the job, it’s like having a warehouse on wheels.
Sweet set up👍🏻! I had been asking for a high top van for 5 years I going to quit unless my next van is a high top. Short roof van are from the past. That my biggest frustration with my job is going into a short roof van on my hand and knees to get supplies out of it. Have you found this to be beneficial for your job the taller roof?
Some ppl on youtube already proved Milwaukee batts last shorter than DeWalts. Regardless, i would also still keep chargers for both in my truck id if i was you. Good loadout. Lemme know what state you're in where you can do HVAC and plumbing without 10 years sacrifice even if you have the skill to do them both now lol
I always hated getting new vans...takes a while to get it set up. Please, move you torches and nitrogen to just behind your bulkhead and never lay down your acetylene tanks. Another good location is between the rear doors and the shelving units. What you want is something solid in front of the tanks with something stronger than bungees to keep them from going sideways. I like to use eye bolts bolted thru the bulkhead (or shelving unit) spaced on either side of each tank. Bungees can be used on the eyebolts but I prefer chains. Bungees to stop the squeaks and rattles. And your manifold gauges...they look like they are the 410 gauges which is understandable that we need them for the higher pressures, but they are not very good for low temp refrigeration with 5 PSI between lines instead of 1 PSI on standard gauges. At the very least, buy 1 standard low side gauge like R404A/R22/R134 scales that way if you have to set superheat on a RIF you will be able to sway your 410 low side gauge with it and dial it in a lot easier. I'm envious of all your inventory...we always tried to stock up but come inventory time they would clean us out! I'm out of the trade now after more than 20 years of nasty kitchens. I watch a video now and then and of course my old techs still call me for help.
Veto warranties their bags for 5 years. Even without receipt. Just call and let them know and they will send you a new bag while they fix yours. If can’t be repaired you keep the bag they sent. Awesome company
I know this is an older video but if a customer is concerned about their gutters they should provide a proper place to land a ladder or have one installed
I'm a 20 year service tech I've watched almost every tech van tour video I can find and not one has said anything about having a pump to clean the water out of secondary pans and that's a common problem I've got a battery powered pump and a hand power pump and two sponges on my van what do all you guys use
Love that high top van. Looks like you can put your ladder in the top and still stand upright. Love it.
Now you get to add two cans of 32, two cans of 454 and a giant fire extinguisher. The little red flammable stickers you have to put on your truck are going to look real nice also.
Nice van 🤙🏽 I'm using an Express, considering a transit for the space
For 18 years always had the Chevy Express models so this transit takes getting used to but love the space when on the job, it’s like having a warehouse on wheels.
I usually don’t get calls for bent rain gutters, but then again I’m a lightweight 😆 great video sir
Wow very impressed with your organization.
How long is that van in the back where you store your equip.Thanks.
I have a Ford Transit Custom using the Rag system from Sortimo. But I would like the sxstem from Bott
Check out my van, if there's interest I could make a longer more detailed video and answer any questions!
I do plumbing and air conditioning in the Bay Area too. I carry same stuff as you too
Sweet set up👍🏻!
I had been asking for a high top van for 5 years I going to quit unless my next van is a high top. Short roof van are from the past. That my biggest frustration with my job is going into a short roof van on my hand and knees to get supplies out of it.
Have you found this to be beneficial for your job the taller roof?
Show the layout of your bag would be great
I like how you mounted your ultimate puller. I keep miss placing mine.
New Subscriber ❤❤❤
Repair Technician from the Philippines🇵🇭
Thanks
Wow.. muy hermoso. Te felicito yo hace poco e adquirido una furgon. De a poco iré armando..
Check out the Fieldpiece BG36 bag it’s straight for getting in and out. BUY ONE ! You’ll like the top where it keeps the bits and has a nice magnet.
Make a warranty claim on veto’s website they’ll warranty that thing in a heart beat
Tool bag load out is a must for any Hvac channel
How do you have the inverter set up and powered?
I have a 21 Mercedes Sprinter 170 high top 3500, got it even more pimped out than this, I love it
you have a spartain 5/16 sink drain cleaner. CAn you describe it?
Some ppl on youtube already proved Milwaukee batts last shorter than DeWalts. Regardless, i would also still keep chargers for both in my truck id if i was you. Good loadout. Lemme know what state you're in where you can do HVAC and plumbing without 10 years sacrifice even if you have the skill to do them both now lol
what do you have holding up your chargers
We want to hear more on how you built your company and how to grow the company
Your video working interactions with the men and women there seems remarkable in that you care about the people. That's rare.
One speed bump the wrong way and it’s raining motors.
I always hated getting new vans...takes a while to get it set up. Please, move you torches and nitrogen to just behind your bulkhead and never lay down your acetylene tanks. Another good location is between the rear doors and the shelving units. What you want is something solid in front of the tanks with something stronger than bungees to keep them from going sideways. I like to use eye bolts bolted thru the bulkhead (or shelving unit) spaced on either side of each tank. Bungees can be used on the eyebolts but I prefer chains. Bungees to stop the squeaks and rattles. And your manifold gauges...they look like they are the 410 gauges which is understandable that we need them for the higher pressures, but they are not very good for low temp refrigeration with 5 PSI between lines instead of 1 PSI on standard gauges. At the very least, buy 1 standard low side gauge like R404A/R22/R134 scales that way if you have to set superheat on a RIF you will be able to sway your 410 low side gauge with it and dial it in a lot easier. I'm envious of all your inventory...we always tried to stock up but come inventory time they would clean us out! I'm out of the trade now after more than 20 years of nasty kitchens. I watch a video now and then and of course my old techs still call me for help.
Are u part of nexstar? If you are, do you recommend it?
Where do you stash the snacks big boy
Veto warranties their bags for 5 years. Even without receipt. Just call and let them know and they will send you a new bag while they fix yours. If can’t be repaired you keep the bag they sent. Awesome company
Nice setup 💪🏾
Let's see the load out of the bag
Where did you get the bottle holder for the bubbles.
Great video what leak detector do u have? I'm looking into buying
Nice! Well done.
Tpxl is a great bag the design is great but it does not hold up like the other veto bags rips easily and tips over even easier
Love this setup super clean
what inverter are you using?
I'm a DeWalt guy never got into Milwaukee
I know this is an older video but if a customer is concerned about their gutters they should provide a proper place to land a ladder or have one installed
I'm a 20 year service tech I've watched almost every tech van tour video I can find and not one has said anything about having a pump to clean the water out of secondary pans and that's a common problem I've got a battery powered pump and a hand power pump and two sponges on my van what do all you guys use
Shop Vac, I already have it & fortunately I don't have to deal with em often
Make a video of you veto loadout
Great setup. We think alike
What do you use the galvanized fittings for?
I also do plumbing
Your bag should be under warranty still veto has 5 years I believe
Veto has a great 5 year warranty send it in for a new one
I can’t believe u guys still use R22
Also dont go fieldpiece to UEI, go fieldpiece to fluke
Nice man. Keep it up!
What engine do you have and what kind of mileage are you getting?
Engine - 3.5L EcoBoost® V6 with Auto Start-Stop Technology!
But just my opinion not that good on gas but lots of power and then sum !
Bag is in warranty
File a warranty claim on that bag, veto will send you a new one. They've always taken care of me.
こんにちは
すごくカッコいいVANですね！
Great video
5 years no down time warranty on Veto tool bags, fill out the online form or call/email Roger Brueward for your warranty.
KISS, Keep It Simple Stupid...lol
Where's ur copper pipe and fittings?
Fresno California
Perfecto amigo. !!
Very well done
El mero jefe
Angel, nice van set up. My goal is to buy a ford transit like yours; can you be reached for business questions?
Sure alway willing to help just shoot me email with your questions.
차가 정리가 엄청 잘되어있으시네요.~👍
very nice!!
Hell yea brother
👏👏👏👏👏👏
Let's see the veto my guy
Coming soon !
Iam ac technician in on my company 10 year more than experience in feeled any job vacancy please reply
Angel, I would like to work for you… (apprentice lvl)
Costless? .... yikes