Це відео не доступне.
Перепрошуємо.
2019-2024 Toyota Rav4 | U-Haul Trailer Wiring Installation
Вставка
- Опубліковано 17 сер 2024
- CMF56434 - This video shows step-by-step instructions for installing trailer wiring on your Toyota Rav4 so that you can do it yourself at home! This walkthrough applies to all Toyota Rav4’s manufactured from 2019 to 2024.
If you’d prefer that a U-Haul hitch professional install your trailer wiring, then choose “Install at a U-Haul” as your delivery option and schedule your installation date online.
To purchase this trailer wiring, a trailer hitch, or other towing accessories for your Toyota Rav4, visit: www.uhaul.com/....
A tow hitch and trailer wiring let you fit your vehicle with a trailer, bike rack, or cargo carrier, but it’s required by law to have wiring installed (and active) before pulling a trailer. Refer to the towing weight capacity listed by your vehicle’s manufacturer before using your receiver hitch.
Here are the specs for the product shown in this video: assets.curtmfg...
Don’t already have a hitch? This video will walk you through the steps to install one yourself!
• 2019-2024 Toyota Rav4|...
Planning to load your 2019-2024 Toyota Rav4 onto a Car Hauler or Car hauler? These videos will walk you through the steps.
Tow Dolly -- • Loading a 2019-2024 To...
Auto Transport -- • Loading a 2019-2024 To...
---
With over 1,500 install locations, U-Haul is the #1 provider of trailer hitch installations in North America. U-Haul carries tow hitches from leading manufacturers like Curt, Draw-Tite, Stealth, B&W, and EcoHitch, and sports a large selection of ball mounts, hitch balls, hitch receivers, wiring, trailer accessories, and other towing accessories.
Follow U-Haul on Facebook!
/ uhaul
Follow U-Haul on Instagram!
/ uhaultrailerhitches
Follow U-Haul on Twitter!
/ trailerhitches
---
0:00 Intro
0:17 Tool list
0:24 Remove cargo panels
1:49 Install wiring harness
4:36 Use example
5:15 Reinstall cargo panels
5:33 Route power wire
8:50 Install connector bracket
10:22 Outro
PN 56434
You are amazing! This video is so clear and easy to understand. Thank you!
Glad it was helpful!
Great job! Very detailed and really well narrated!!!
1) Is the grounding wire going to corrode the body as it is 2 different metals?
2) will Toyota void the warranty?
He forgot to mention using the double-stick tape to secure the converter box somewhere under driver side rear panel.
Good point Alex, we'll be sure to address this for future videos!
@@trailerhitches And the need to also reattach the negative battery terminal at the end, though he may not have undone it in the beginning. Also, where he placed the ground wire attachment under the horizontal panel is too far away from where the converter box is likely to be attached by the double stick tape--onto the inside of the driver's side of the body. An attachment point on the left vertical side, at least half way up, will allow some slack in the wire. See the etrailer video for the placement.
Use split loom to protect the wire when you route it from the left to right behind the metal shield, otherwise the insulation will find a way to rub some metal and both cause your trailer lights to malfunction, but also take out your brake lights or turn signals.
That is a hot wire could cause a fire.
video seems good but I personally don't use power tools on a battery or for small jobs like this
Thanks
For my 2019 Rav4 Hybrid XSE, I recently installed a Tekonsha 118801. My Rav4 has a subwoofer on the left side. The wire for the left turn signal is short by about 12 inches because of the subwoofer housing filled the space. Though it was easier to route the power wire because the hybrid's 12vdc battery is just at the rear cargo right side.
Thank you for sharing that information!
If you are pulling or have something behind the rear sensors - is there a way to bypass the rear sensors to not activate other than turning off the rear sensors?
You will need to deactivate the sensors when something is behind you! Most vehicles make this a simple process for you to do thru the dashboard menu or buttons on the console. The vehicle often turns them back on automatically for safety when the vehicle is started. Just Turn them off again before you begin your journey!
Great! Now do one for the Corolla Cross!
Here you Go. I completed it a few months ago. ua-cam.com/video/Mhueh5K_yog/v-deo.html
Great job explaining this. If you don't mind explaining, if I have a hybrid, how would I route the black wire to the battery? I am not sure how that works. Also do you have a video showing the trailer hitch installation as well? What part number hitch did you put on this Rav4? I have the Rav4 Hybrid 2021 AWD LE. Can i use the same electric package as you used as well as the hitch if you don't mind telling me what you installed here? Thank you again for showing us this.
Great questions!
1. Here is our video for the hitch installation using part number Curt 13416. ua-cam.com/video/F_JdszL1UQ8/v-deo.html
2. The wiring part number we used in this video is Curt 56434. Both the wiring and hitch is compatible on your vehicle.
3. The battery is located in the rear trunk of the hybrid (Prime) on the passenger side under the trunk mats. This allows a much easier time to route the black power wire to the battery without going outside of the vehicle. The wires can be ran and stored under the mats. Make sure to tie off any excess wire slack with zip ties that are provided with the wiring kit.
To purchase any of the products above, please visit our website below! We also provide installation services from U-Haul hitch professionals!
www.uhaul.com/Trailer-Hitches/
Can I ask why the power converter and wiring up to the battery are needed? I thought once you plugged into the car's tail light wiring your trailer lights would do what your car lights do.
Most cars, especially with LED taillights, do not have enough power to activate the converter box as well as the lights themselves. 12V power is required to work properly.
3:05 what the stock number on the t connector kit for the Rav 4 hybrid XLE THATS WHAT I GOT anyone know the model serial number of the kit let me know thanks
in the link above, for rav4 prime XSE 2022, i only found
4 Flat Multi Function Power Converter, Plug Type: 4 Flat
Part number: CMF59236, Manufacturer Part Number: 59236
is the installation for that similar to this video? (diff part number and slightly diff car model)
thanks!
The 59263 is a universal hardwire kit. The installation is much more difficult. Here is our video for it. ua-cam.com/video/OLDey4rUxw0/v-deo.html
According to the manufacturer, Tekonsha 118801 will also fit your vehicle. You can find a location that carries it here. www.uhaul.com/Trailer-Hitches/
@@trailerhitches ok, thank you. Do you know if the 56434 works on a 2022 Rav4 Prime XSE?
@@RodrigoRosa Yes, that kit will work as well
If you take it top 12in that be ok like uhaul
Why is that Toyota Dealership charging $1500 for the same thing U-Haul charging $ 450? Do I have to trust Uhaul? Please help .
We install 100's of hitches for the RAV4 on a daily basis at our locations throughout the US and Canada.
Toyota is running the wire inside the cab, they run it throught the firewall and remove seats ect.
Wait, you supply a black wire for +12V Power 🤦♂️
The wiring harness kit will have a length of black 12 gauge wire intended to power the converter box when necessary!
@@trailerhitches Why not make + red? Black is for ground in automotive electrical wiring. It’s not a big deal until you have to troubleshoot an issue. When I see a black wire going to the positive side of the battery it shows me someone 1/2 assed the install. I just ordered this kit and had to also order a spool of 12ga red wire.
What's wrong with you that is a hot wire needs a protective shield. All the other wires have a protective shields on them. I would not want you doing my car!!
If you route it correctly, it does not need a shield. The wire is durable and there are many channels in and under the car that can protect the wire. A shield or sleeve wont hurt but it is an unnecessary step.