How can anyone with any mechanical ability not like what this man built. Yes I know he did not invent this type cutter but, he did manage to make his own. He should get at least a thumbs up on his machining . Yet alone it works!
Such a cool machine. To bad we didn't get to see it in action. If the belt slips will the cutting blades hit each other? I experienced something like that on a factory build machine. You should consider a pivot point between the green and yellow part to make it work better in uneven terrain.
The blades do not touch each other, I shorten them. Between them the distance of 2 mm. Mower follows the uneven terrain, it moves freely hinged on tractor. Video mower in action will soon
only problem I see is the blades hitting each other when they get out of time(belts WILL slip). A little stagger like a lawn mower deck would prevent that.
Excellent work,well done .But let's see it doing the job you built it for !!.I think there may be a small problem , if the belts slip allowing the knives to touch each other
Dang Dude, KUDOS! That's a lot of engineering and machining! Nice Paint! Already trying to figure out how to improve upon, wider swath, additional cuters, two-ended skid plate, etc. How does water drain from the open standpipe? Cheers!
New test of rotary mower ua-cam.com/video/8cGhyZvrq-k/v-deo.html Build of a mower ua-cam.com/video/eEzMlek5sPE/v-deo.html First test ua-cam.com/video/U6wrGQgnnEA/v-deo.html
Cool concept BUT the belt won't keep blades in time and the cutters will be banging in to each other. Thats why commercial machines use gear drives to the arbors. You'll have to widen them out until the cutter barely miss and set the bar to trail at an angle so it will cut between the cutter heads , or make a timing gear set-up.
That is some crazy looking machinery there man, i am thinking it doesn't work well or the video would be a tad longer with a demo of some sort. LOL The tiny blades are really odd. anyway. ya got me to see this I guess.
Bit of a major mistake not leaving enough blade clearance between the discs, not to mention the danger of no cowl, what happens if a blade brakes or a bolt comes off....law suit.
I'm talking about the two blade belt. If it rubs at the crossing point it won't last. I'm not trying to be an ass like so many UA-cam posts, I'm actually trying to help. If the belt rubs, it Will fail!
awww there there.... it's ok... you're allowed to talk :o) It would probably make the video better if you learned how to say something while doing the videos like even basics of why you're building it
Be careful with those homemade products cause they dont have the safty features as store bought ones do so spend a bit more money on a store bought one and be safe
Добрый день! На своём канале о минисельхозтехнике мы ведём рубрику: «Пятничный дайджест интересных видео». В очередном выпуске хотим презентовать зрителям часть Вашего видеоролика. В описании видео будет обязательно размещена ссылка на исходные видеоматериалы. Мы уверены, что благодаря нашему видео и размещенной ссылке, Ваше видео получит дополнительные просмотры, а канал подписчиков. Надеемся на дальнейшее долговременное сотрудничество!
How can anyone with any mechanical ability not like what this man built. Yes I know he did not invent this type cutter but, he did manage to make his own. He should get at least a thumbs up on his machining . Yet alone it works!
Such a cool machine. To bad we didn't get to see it in action.
If the belt slips will the cutting blades hit each other? I experienced something like that on a factory build machine.
You should consider a pivot point between the green and yellow part to make it work better in uneven terrain.
The blades do not touch each other, I shorten them. Between them the distance of 2 mm. Mower follows the uneven terrain, it moves freely hinged on tractor. Video mower in action will soon
Rolingmetal
bvv sa face
Скаут т25
One of the most dangerous things I have ever seen, I love it.
Nice job...would like to see it run
how to plant it on an ATV if you can eat then I will be very glad to share your thoughts
Great thing!!! But we need to see it in action, right?
awesome but I wanted to see it in action
John Biggs me too which is why I thumb down the video
Nuk
Video mower in action will soon
you don't need to give it a thumbs down just because he did not show it yet. It's a great project.
pezo 206 68 zuocasti remen
How often is it necesary to change the twisted belts?
Druze,ovo je rotaciona kosacica nije tarup 😊 uostalom svaka cast 👌💪
Thank you for the link back to this video. Great job building this.
only problem I see is the blades hitting each other when they get out of time(belts WILL slip). A little stagger like a lawn mower deck would prevent that.
after modification the blades do not get to each other 2mm, now everything is fine. It used to be a problem, blade blows could be heard.
where did u get the universal joint at 5:30
Thats pretty neat but I wish we could see it working as well
ua-cam.com/video/U6wrGQgnnEA/v-deo.html
Cit au discurile in diametru???
Excellent work,well done .But let's see it doing the job you built it for !!.I think there may be a small problem ,
if the belts slip allowing the knives to touch each other
Knives do not touch each other, they shortened.
Dang Dude, KUDOS!
That's a lot of engineering and machining! Nice Paint!
Already trying to figure out how to improve upon, wider swath, additional cuters, two-ended skid plate, etc.
How does water drain from the open standpipe?
Cheers!
just look at old mowers and you will see how to make it
What do you have for skids under the drums?
New test of rotary mower ua-cam.com/video/8cGhyZvrq-k/v-deo.html
Build of a mower ua-cam.com/video/eEzMlek5sPE/v-deo.html
First test ua-cam.com/video/U6wrGQgnnEA/v-deo.html
as the swinging blades are so close - what stops them from hitting each other?
Blades shortened and do not touch each other
Trabalha muito bem! Esse torno também foi você que fez?
So does it mow?
Молодець! Як служать ремні після сезону експлуатації ?
За весь час експлуатації замінив лише один ремінь, той великий що йде від ВОМ. Ремені купую тільки якісні.
Cool concept BUT the belt won't keep blades in time and the cutters will be banging in to each other. Thats why commercial machines use gear drives to the arbors. You'll have to widen them out until the cutter barely miss and set the bar to trail at an angle so it will cut between the cutter heads , or make a timing gear set-up.
The blade does not touch each other, which I shortened so that the gap between them was 2 mm
Good. It looked like they intersected on the video.
супер получилась косарка
А фрезер у вас саморобний?
Дякую. На цьому каналі усі станки саморобні
Доброго времени суток! Спасибо за такую простую и эффективную конструкцию. Скажите, пожалуйста, какой ширины получается прокос?
Здравствуйте. 100 см
awesome build I subscribed to see the rest when you get it going thumbs up
Kann man das auch Kaufen?
Jeśli pasek nie będzie dobrze naciągnięty Dobrze mi się wydaje, że ostrza mogą zajść jedno na drugie jak się koła nie zgrają?
Ostrza znajdują się w odstępie 1-2 mm.
Mistrz,kosiarka super ale tokarko frezarka nie gorsza traktorek też fajny daje suba
You should also have the proper safty equiptment for whatever product you are using
That is some crazy looking machinery there man, i am thinking it doesn't work well or the video would be a tad longer with a demo of some sort. LOL The tiny blades are really odd. anyway. ya got me to see this I guess.
Thank you for the demonstration and the video.
Nice job with the fabrication, I'm impressed
the crossed belt will be fine. i have used machines designed like that and have reversed conveyors that way they run many hours. nice work!
In Ireland you would get one them mowers for nothing under a hedge somewhere. Them rotary mowers were being buried and scraped
impressive work of craftsmanship
Super meserias bravo lor 👍
can you tell us what size the shaft is? you can give us some drawings?
The drawings have not survived
Cum pot sa văd când faci proba
wow all them toys to play with to make things leaves me out
Will you show me how you work?
Yes, in the near future.
*лайк отличная коса получилась я тоже люблю технику и начинающий Bloger UA-cam*
Do u have project of this mower?
I do not have
Bit of a major mistake not leaving enough blade clearance between the discs, not to mention the danger of no cowl, what happens if a blade brakes or a bolt comes off....law suit.
А как увас натяжка ремней
На роторах шайбами. Шків з двох половинок, між тими половинками шайби ставляться.
Tarım aletlerinin içinde cıbıldak karıların ne işi var
koymazsanız sevinirim
Please let us see running this thing... :D
до первого муравейника!
Похоже и до муравейника не доехал
Hello, please drop in the drawings with the dimensions. I really need it at home.
это что самодельный станок?
На этом канале абсолютно все самодельное
@@Homemadelathemachine станок просто супер,мне бы такого
дело мастера боится! лайк!!!
If that thing runs more than 5 minutes at speed before that crossed belt eats itself, I would be shocked.
On older combine harvesters belts intersect and work very long.
I'm talking about the two blade belt. If it rubs at the crossing point it won't last. I'm not trying to be an ass like so many UA-cam posts, I'm actually trying to help. If the belt rubs, it Will fail!
Tom Wise it won't be a problem the old hay equipment blowers combines they all did that
Well Done!
Молодец просто.
Please show us working on grass or hay
por favor si vc pode entre em contacto com migo que fazer um torno do mesmo do seu obrigado
SMFH....nice but show it doing what it's supposed to do.
A ile. Ci za to wyszło gdzieś
Ефективно! Клас
extraordinary
закиньте пожалуйста чертежи с размерами
Very good
Beautyfull💪💪💪👍👍👍🇷🇸🇷🇸🇷🇸
Well done thanks
Super
Просто супер молодец
Resenje sa ukrstenim kaisem nije najbolje jer ce u jednom trenutku doci do udaranja nozeva. Vec su to neki radili i lose se pokazalo
awww there there.... it's ok... you're allowed to talk :o) It would probably make the video better if you learned how to say something while doing the videos like even basics of why you're building it
I wouldn't call this "homemade" shop built would be a better description.
is a good work!
What are you doing From 0:29 1:35
Das ist ein mähwerk
👍
Be careful with those homemade products cause they dont have the safty features as store bought ones do so spend a bit more money on a store bought one and be safe
Nice
Доброго времени суток. вы по русски разговариваете?
Да
Мне понравился ваш вариант косилки. Могли бы вы сказать какой диаметр дисков
48см
Спасибо
на это есть двухсторонний клин
svaka cast
Mouse at 1.54
It is not a mouse, this feather
Ima li neko nacrt kosacice
👌👍👍👍👍👍👏 Класс
Выглядит сурово
Молодец
What you making let me know I'll get you one ok
Добрый день!
На своём канале о минисельхозтехнике мы ведём рубрику: «Пятничный дайджест
интересных видео».
В очередном выпуске хотим презентовать зрителям часть Вашего видеоролика.
В описании видео будет обязательно размещена ссылка на исходные
видеоматериалы.
Мы уверены, что благодаря нашему видео и размещенной ссылке, Ваше видео
получит дополнительные просмотры, а канал подписчиков.
Надеемся на дальнейшее долговременное сотрудничество!
Добрий вечір. Я не проти.
@@Homemadelathemachine а какие у вас размер шкивов ?
Уточните какие шкивы вас интересуют
smart man
You should have stated at the start that you wont show how it runs! Wasted my time waiting for the testing. Wont do that again.
👍👍
Na nízkou trávu snad dobrý .
HI there. Why can you talk and explain what you doing? If I did really have an interest in this subject I would have been gone after 20 seconds!
👋👍🤝
Beautiful ... Just a shame that it does not work.
І як я таке прозівав? 👌👍👍👍
For museeooo😂
I want to see it cut grass
ua-cam.com/video/8cGhyZvrq-k/v-deo.html
Конструкция рамы слабая!
:)
That is ONE DUMB WASTE OF TIME, MONEY, STEEL AND EFFORT...
Продаётся
Ні
waste !