Step-by-Step Guide: How to Install and Use a Rotary Attachment for A Trotec Laser Engraving Machine

Are you struggling with how to install and use a rotary attachment for your laser engraving machine? Look no further! In this video, Stephen Colley from Trotec Laser Technical will guide you through the process of setting up and using a rotary attachment for the Speedy series and SP500 laser.
Stephen will start by showing you how to clamp a cylindrical object using the cones on the rotary attachment. He will demonstrate how to loosen the lever and separate the cones, place the cylindrical object, and then tighten the lever. If you need to process the same item repeatedly, Stephen will show you how to swap items quickly, as the movable cone is spring-loaded.
If you want to engrave on a curved surface, where the surface isn't flat, Stephen will show you how to tilt the rotary to adjust the angle. You also have the option to adjust the height of the cones using the scales on both cones so that you can align the height perfectly for objects with a wider diameter.
Stephen will then demonstrate other attachments to the rotary, including the manual ring chuck, manual three jaw chuck, standard three jaw chuck, and the draw chuck. He will show you how to mount the main chuck onto the adapter plate, attach it with three screws, and how to change the attachment fixtures using two wrench keys. You'll also learn how to open and close the jaws, replace the jaws, and use the small lever that comes with the manual three jaw chuck.
Before installing the roller mechanism, Stephen will guide you through loosening the belt tension and then tightening the belt tension, depending on the model of your laser engraving machine. Finally, he will show you how to install the roller mechanism by setting the guide holes on the guide pins on the plate below, attaching the screws, and installing the belt.
This step-by-step guide is perfect for beginners who want to learn how to install and use a rotary attachment for laser engraving machines. If you have any questions or would like to book a preventative maintenance service with Trotec Laser Technical, you can contact them through the link in the video description. Don't forget to like and subscribe to our channel for more helpful tutorials!
------------------------------------------------------------------------
🧱To purchase MATERIALS go to:🧱
www.engraving-supplies.ca
To get a quote on our laser engraving and cutting machines, please contact us below:
📞 Phone: [phone]
📧 Email: [e-mail]
Follow us on social media:
🔵 Facebook: goo.gl/UfHnEa
🐦 Twitter: goo.gl/GEgTwQ
📸 Instagram: goo.gl/gJN5b4
📱 LinkedIn: goo.gl/oBL6V4
🎶 TikTok: bit.ly/3i7PHbb
🌎Trotec Canada locations:
Vancouver | 20381 62 Ave #705, Langley, BC V3A 5E6
Calgary | 820 28 St NE #2, Calgary, AB T2A 6K1
Toronto | 1705 Argentia Rd #9, Mississauga, ON L5N 3A9
Montreal | 8096 Trans Canada Route, Saint-Laurent, QC H4S 1M5
#RotaryAttachment #LaserEngravingMachine #TrotecLaserTechnical #StepByStepGuide #EngravingTips #CylindricalObjects #ManualChuck #ThreeJawChuck #DrawChuck #BeltTensioning #RollerMechanism #PreventativeMaintenance #EngravingSolutions #EngravingIdeas #EngravingInspiration #EngravingCommunity #LaserEngravingExpert #LaserEngravingTechnique #LaserEngravingTipsAndTricks

[@the_real_hislordship]

Ah a fellow South African.