@@thewrenchmaster122 Oh, I took it to Chrysler here in Orange and they wanted $5,000 for a tune up, Valve seal - I think it was, I'll call them and see if they have the list. I had it and I cannot find it.
Dorian Thompson In order to get the egr off you have to take the intake off you have to unbolt every screw and pull it at a angle while lifting and prying egr tube away . That’s the best and easiest way to get it off
Dorian Thompson And to remove the connectors I recommend a very small flat head or pick, to remove connectors most connectors i ran into in the dodge had the lil red tabs to push back which unlocks it and allows you to remove it. If it broke off you have to use a pick or small screw driver
I have a 2010 2.7L flexfuel. Is it same as this. The intake gaskets. Pluga. Coil
Are you anywhere near Orange County, CA? I have a misfire on #1. Looks difficult for me (I'm a girl) to fix.
Does it have a engine light ?
@CCintheaOC I would start by changing the spark plug out on cylinder #1 then clear the engine light, that might fix the problem
@@thewrenchmaster122 How do I clear the engine light.
@@thewrenchmaster122 Oh, I took it to Chrysler here in Orange and they wanted $5,000 for a tune up, Valve seal - I think it was, I'll call them and see if they have the list. I had it and I cannot find it.
@@thewrenchmaster122 They wanted to replace all of the seals, belts, etc. but they specified #1 cylandar seal.
Very helpful thanks man
can't disconnect the plugs and EGR tube in the back. It wouldn't pull off easily by hand, what can I do to get it off without cutting those hoses?
Dorian Thompson In order to get the egr off you have to take the intake off you have to unbolt every screw and pull it at a angle while lifting and prying egr tube away . That’s the best and easiest way to get it off
Dorian Thompson And to remove the connectors I recommend a very small flat head or pick, to remove connectors most connectors i ran into in the dodge had the lil red tabs to push back which unlocks it and allows you to remove it. If it broke off you have to use a pick or small screw driver
Got it! Thanks for the reply and your video. #helpful
Dorian Thompson any time
Bout to do this same job today wish me luck yal
I will be making more videos on how to diagnose a engine misfire and how it led me to performing this job.
Fuck. Yes. Dude. Life saver