Відео

Does it have a engine light ?

@CCintheaOC I would start by changing the spark plug out on cylinder #1 then clear the engine light, that might fix the problem

@@thewrenchmaster122 How do I clear the engine light.

@@thewrenchmaster122 Oh, I took it to Chrysler here in Orange and they wanted $5,000 for a tune up, Valve seal - I think it was, I'll call them and see if they have the list. I had it and I cannot find it.

@@thewrenchmaster122 They wanted to replace all of the seals, belts, etc. but they specified #1 cylandar seal.

Why not?

@musafa101 Please Explain

Glad you liked it!

@Alberto Dominguez... once you disconnect the sensor and remove the bolts. Fallow the cord to we’re it plugs in on top. Wiggle them around and see which one it is

Yes it’s in distributor

Anytime man glad it helped. If you have any car questions never hesitate to ask.

our president kim namjoon what kind of vehicle do you have ?

The Wrench Master 2002 dodge Dakota please

our president kim namjoon check near the timing cover or by the crank shaft harmonic balancer or side of engine

@@thewrenchmaster122 i think my 99 is right by the crank shaft harmonic balancer. so yes check there as well

Thank you 🙏

@@thewrenchmaster122 Hey I saw your reply on another video and I have a few questions does Financial aid really cover most of tuition I am considering going to UTI and I also wanted to know if it is a good school I am serious about attending school I would like to learn and become a master technician

The Wrench Master just checked with the dealer and said it was 1,900

EliteGamer14 if parts are included you got a good deal

EliteGamer14 I live in California prices can vary depending on were you live and depending on the repair facility

The Wrench Master yeah bro California always expensive and no the parts are not included but the water pump it self it’s 200$

EliteGamer14 Glad you got a good deal 👍 just fallow the timing chain and water pump changing intervals wen they need changing and you will be ok. Also change your oil often because on these models the timing chain tension is controlled by oil pressure and if the oil isn’t changed often it will start to lose tension, and you will have to do the job all over again good luck man plz like and subscribe or share my Chanel I would be happy to help with car questions

Fermin Carapia you can try fitting a small flat head screw driver underneath the bracket and pry it outward

Dorian Thompson In order to get the egr off you have to take the intake off you have to unbolt every screw and pull it at a angle while lifting and prying egr tube away . That’s the best and easiest way to get it off

Dorian Thompson And to remove the connectors I recommend a very small flat head or pick, to remove connectors most connectors i ran into in the dodge had the lil red tabs to push back which unlocks it and allows you to remove it. If it broke off you have to use a pick or small screw driver

Got it! Thanks for the reply and your video. #helpful

Dorian Thompson any time

Bout to do this same job today wish me luck yal