REPLACING THE CLUTCH ON FORD FIESTA (MK6)
Вставка
- Опубліковано 15 жов 2024
- In this video, I try my best to give the best advice and as many hints around problems that I found during this installation. It’s not a full on tutorial but I hope it helps someone with having the confidence to tackle this job yourself. Thanks for watching guys, don’t forget to subscribe!
![FORD FIESTA - 450€ | CAMBIAMOS EL BOMBÍN DE EMBRAGUE👨🏼🔧| MEDIO MOTOR DESARMADO 😅| [Parte #6]](/img/n.gif)
Brilliant video,yes that is sorted,I wouldn't have noticed the gearbox side myself being in a rush, but the car moves and drives how it should.great work.
Thank you mate, a day job turned into my whole weekend😂 Yeah he hasn’t had any issues since sorting it for him which I’m really proud of! Thanks for the continuous support mate
Mate I have no idea who you are but watching this, at the end I was so proud of you! Keep up the good work!
Thank you mate! Ahaha and I have been carrying on since I posted that video lol. Thanks for watching pal
Can’t believe he didn’t have the engine supported or chocked up. The whole weight of the engine and gearbox is only supported by the one engine mount by the cam belt and that can cause a lot of damage to the mount and other pipes such as air con or power steering hoses and also the exhaust is under stress, other than that what a great 👍 job. Well done mate I know from experience it’s not easy at all when doing it on the ground. Just some constructive criticism from a fellow Welshman 🏴
Thanks for the video and fair play for leaving the mistake in!
I just didn’t want anyone to make the same mistake as it’s an easy mistake to make and it was horrible undoing all of the work I had just done lol
Good job well done ,you never know till you try and each job builds your confidence up .Only advice i could add would be it would of been a good idea maybe to to soak the whole of the engine and underneath in a degreasing solution and jet wash all that oil and grime away before you started but other than that all is good .
I wanted to mate but I haven’t got electric in the garage at the moment or running water to get the jet wash on it😞 I did what I could with brake cleaner and some degreaser all around the engine and box. Looks decent after it left me. Thanks for the constructive feedback and thanks for watching mate! Appreciate it massively
1.5 hr the ball joints, anti roll Bar drop link's,triangles and sub frame, gearbox and plate flipped😂
It's amazing how much time you don't waste looking for right size tools😂.
Oil in tomorrow, battery tray and wiring . Then it's done and I get payed 😎👍
Hey mate when did you cleaned up the fly wheel did you just spray it down and give it a wipe over or did you machine it back with a tool?
Just gave it a clean with some brake cleaner mate
When installing a new clutch and pressure plate onto the flywheel is there a certain position (other than the metal studs ) that the pressure plate assembly must locate?
TIA
Brave and honest of u to admit the bulls up. Easily made ..
I just watched this video back ahahah, still can’t believe I did it. Thanks for watching mate
Be careful on the floor. I got a hernia doing that 😅 don't twist 😢 you are not kidding when you say you use your neck and abs. Nice tutorial though had a go at the weekend. Much easier on a ford than a Renault
How much gearbox fluid did you put in??
Just until it started to pour back out mate. Couldn’t tell you exactly how many litres
@@BTR_REBUILD It should be 2.3 litres or there about (11 syringes or so) . I think I might try a flexible tube and a funnel held above the engine if I try this - I expect I will have a helper.
Hi i recently changed my clutch after it started slipping badly. Now i see it engages when the pedal is released about an inch off the floor. Any idea on how to fix this?
I expect it fixed itself after the clutch had bedded in.
hy is that luke’s clutch sets
It’s usually written on the plate which side is which
I know now lol, learned that the hard way!
Good
U should also suport the engine with a jack
Notice that "Driver Side" is relative.
In what way mate? I’ve forgotten by now
Just kidding. Its about that you drive on the wrong side of the road thing. Thanks for the video.
Was planning to do it myself, had everything on materials, but turns out: you cant buy ABS or any other muscle. Maybe I talk again with my garage.
H0w to replace gear when clutch is in Ford fiesta03 plate
Gearbox?
Did this have a duel mass flywheel or not?
No the MK6 doesn't
It's not a 6, it's V 2nd génération 😉
Bollox... I've just done the same thing😵💫😵💫😵💫😵💫🤬
I don’t envy you right now mate😭😭 Don’t worry it’s much quicker as you know exactly what to take off now lol