I use this high feed cutter too. As long as the workpiece is not alloy steel, it works quite good. In more difficult material, the tool has a tendence to heat up and burn the cutting edge. With a Iscar tool with same cutting datas, the tool and workpiece stay cool(means handwarm). But in case of plunging, the seco tool is superb. Thanks for the nice video!
Not a machinist but hobbyist. Ended up on this video after watching CNC fail compilations. Dumb question, what happens if you crash a large end-mill with inserts, does it just break the tips or becomes something more severe like where you need to even fix the spindle itself.
Depends on the crash. A lot of times you'll get away with the tips and tip screws being bust. But if it's programming and it rapids into the fixture you could get major damage. Doesn't happen as often now with things getting done on simulator prior
Happend to a workmade of mine on a 5 axis machine. The Spindle need to renewed, also the Tool was destroit and the Table, had massive damage also. Sad Day, it takes more than one week to fix it.
I always see the rotation of the 5th axis when they're cutting tapered angles.... Wouldn't a 3D pass ball e-mill be faster? That's what I always do...Just curious...
Yeah, sometimes it just doesn’t sound like much damage.. one shop I worked did hips and knees and shoulders. They roughed out 2 hips from one rectangular piece titanium with a 1-1/4 HSS rougher. One day the guy didn’t change out the end mill at the prescribed time. So, it broke halfway through the next part. It made a huge bang. It damaged the spindle on a 50 taper Mazak
What is with the obsession to add the most annoying music to otherwise good videos? Just the sounds of the machine and cutters would be fine. At least there is a mute button.
276m/min on F40M (low-speed PVD grade with thin coating and focus on toughness)? ap=0,5 on XOMX12? It is a joke? High feed 6 in the beginning shows only 50% of its opportunities. Good video, but strange cutting data.
@@189Moncho For High Feed 6 with ME13-T350M inserts on small overhang (1st part) and for such combination ap-ae: fz=1,5 - for start up to 1,8mm/teeth (fz - main optimization parameter) for ae=30%, fz=1,2..1,5 for ae=70% (ae is important for productivity in this case); Vc=200..250m/min (not so important parameter compare to fz in HF milling, it is normal value for T350M - CVD grade with focus on toughness and difficult applications, when machining low-alloyed and low-carbon steel). There is possibility to increase ap up to 1,5..1,6mm (max level =1,8mm for insert) keep in mind rigidity and vibration level; for ap=1,6 possible to start on fz=1,1..1,3 (if ae=30%). 218.19-R230 insert is really brutal, like brick, difficult to breake, possible to work on highest fz. Strong side of video - machining without coolant - rule for milling constructional steels with CVD grades. For F40M - normal value of Vc on such steel - 120..140m/min.
Always remember to repent of your sins (sin is transgression of YAHUAH’S LAW: Genesis, Exodus, Leviticus, Numbers, & Deuteronomy) And Have Belief On YAHUSHA HAMASHYACH. HE Died and Rose three days later so that you can be forgiven of your sins! HE Loves you! Come to HIM!🙂🙂
I use this high feed cutter too. As long as the workpiece is not alloy steel, it works quite good. In more difficult material, the tool has a tendence to heat up and burn the cutting edge. With a Iscar tool with same cutting datas, the tool and workpiece stay cool(means handwarm). But in case of plunging, the seco tool is superb.
Thanks for the nice video!
I Like the video...but hate the background music. IMO the real music is the sound of chips hitting the GoPro 🎶 LOL!
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html🔥
There is a hidden rule in youtube. Every video should have unnecessary high volume music!
Great work
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
feed mill my favorite tool!
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html🔥
11:50 this is amazing... so long tool on that kind of machine (two axis satellite) ... WOW!
Not a machinist but hobbyist. Ended up on this video after watching CNC fail compilations. Dumb question, what happens if you crash a large end-mill with inserts, does it just break the tips or becomes something more severe like where you need to even fix the spindle itself.
Depends on the crash. A lot of times you'll get away with the tips and tip screws being bust. But if it's programming and it rapids into the fixture you could get major damage. Doesn't happen as often now with things getting done on simulator prior
It's gonna be a bad day 🤣
Happend to a workmade of mine on a 5 axis machine. The Spindle need to renewed, also the Tool was destroit and the Table, had massive damage also. Sad Day, it takes more than one week to fix it.
Milling-Machine wins - FLAWLESS VICTORY
You didn’t face the bottom part ?
I always see the rotation of the 5th axis when they're cutting tapered angles.... Wouldn't a 3D pass ball e-mill be faster? That's what I always do...Just curious...
Depends on the surfacequality u need.
I like this video for show all time worke
Very good
I love, tecnologi,,!
Why u skip 8:39 when tool starts vibrate ? :D
И как только заготовку не выдрало из кулачков. Вы их там как зажали?
Good 👍
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
I lost an Insert on my high feed mill once.
I don't have a high feed mill anymore
You just have to spin it faster
@@bobbywright3479 crazy part was I stopped it as soon as it happened. All you heard was a mediocre thunk, and opened the door to absolute carnage..
Yeah, sometimes it just doesn’t sound like much damage.. one shop I worked did hips and knees and shoulders. They roughed out 2 hips from one rectangular piece titanium with a 1-1/4 HSS rougher. One day the guy didn’t change out the end mill at the prescribed time. So, it broke halfway through the next part. It made a huge bang. It damaged the spindle on a 50 taper Mazak
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html🔥
Subscribe.
Good👍👍
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
Nice
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
I buy a saw mill for this job😉
Boss trading karne ka koi program hai
Inset type
Все рекламные ролики на куске металла. Вы тонкостенную сделайте, с чистотой и допуском, а это можно и болгаркой ободрать.
What is with the obsession to add the most annoying music to otherwise good videos? Just the sounds of the machine and cutters would be fine. At least there is a mute button.
There appears to be some hideous background noise polluting this video. Why?
I'd like to know what this weird workpiece is gonna be once it is finished.
Seemed too long and tedious for a pure demonstration.
wait...this video is old, and from another channel 🤷♂️
yes is stolen = garbage channel
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
Typing ka Nahin to link ka program chahie mere ko
wow
👍🏻👍🏻👍🏻
People complaining about the music.., I want to know what is a techno track though…
NONSENS 🤗
Экономьте металл !!!
2:15 very slow lead out
276m/min on F40M (low-speed PVD grade with thin coating and focus on toughness)? ap=0,5 on XOMX12? It is a joke? High feed 6 in the beginning shows only 50% of its opportunities. Good video, but strange cutting data.
What’s Speeds and feeds you recommended ?
@@189Moncho For High Feed 6 with ME13-T350M inserts on small overhang (1st part) and for such combination ap-ae: fz=1,5 - for start up to 1,8mm/teeth (fz - main optimization parameter) for ae=30%, fz=1,2..1,5 for ae=70% (ae is important for productivity in this case); Vc=200..250m/min (not so important parameter compare to fz in HF milling, it is normal value for T350M - CVD grade with focus on toughness and difficult applications, when machining low-alloyed and low-carbon steel). There is possibility to increase ap up to 1,5..1,6mm (max level =1,8mm for insert) keep in mind rigidity and vibration level; for ap=1,6 possible to start on fz=1,1..1,3 (if ae=30%). 218.19-R230 insert is really brutal, like brick, difficult to breake, possible to work on highest fz. Strong side of video - machining without coolant - rule for milling constructional steels with CVD grades. For F40M - normal value of Vc on such steel - 120..140m/min.
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
👍
vedo e intravedo che non rafredi masa zgjati
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
Always remember to repent of your sins (sin is transgression of YAHUAH’S LAW: Genesis, Exodus, Leviticus, Numbers, & Deuteronomy) And Have Belief On YAHUSHA HAMASHYACH. HE Died and Rose three days later so that you can be forgiven of your sins!
HE Loves you! Come to HIM!🙂🙂
Playback speed 2X, sound off
You're welcome
why the silly music ?
what an inefficient way of doing that. to each their own.
To please mujhe bataiye
so many video
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Subscribe
ua-cam.com/channels/MvjS2Dw20ukoyPID0BmGHA.html
Highly annoying.