Discord is so overrated unless you can babysit it in hopes of a reply which when asking for a help is 50/50. I just don't have the time to even be on Discord I guess. Its frustrating to say the least.
helpful stuff indeed. if you havent already, and are lookin for other vids to do, other variants of this video for Desktop play, DIY of varying setups (multiple display, only 2 display etc)(so not ATGames .. which, maybe there wouldnt be much difference for that); good stuff thanks for putting this out
I've tried this on 3 different machines and the Backglass never pops. I see the table, i see the backglass on popper, but when the table starts everything comes up except the backglass. Breaking my brain what automated part is not completing.
I never had my plunger set up in FP. It does not work. Nudge would be the software nudge. Map the nudge keys. Have a read at this article. pinballnirvana.com/forums/threads/analog-nudge-in-fp.19833/
Great video,can you upload a video explaining after to install Popper how to add all the tables of Visual pinball in it and other video of how to load tables of versions different of Visual Pinball(vp9 ,vp10.7,vp 10,8 etc..) thanks
Thanks for taking all the time to make the video! One question that I have is regarding the DMD or other display (forgive my ignorance) that was on the Leprechaun playfield after you started. I have the same thing but didn’t know how to resolve it? Thanks again!
Hi, thank you for all this info. I’ve been messing around with this for 2 days and in need of some help. If you don’t have the vibs board and want to set it up like pinball fx are you able too? Or does this only work with the vibs board.
i followed video....but when i launch front end, it turns sideways and table turns landscape mode!! This is what I started......ALP...went to hdmi, OTG set for -90 display in windows....main screen in portrait and 2nd display landscape. 100% hard to maneuver in widows with the screen sideways which is why main screen is set to portrait mode.. ran baller installler...followed each step and front end turns to landscape mode and turns the right. thisn is myn 3rd time trying to set this up and each time front end turns to the right in landscape mode. what does the alp otg mode need to be set at and windows, main display needs to be set at?
hello when i launch pinup everything shows correctly on my alp . but when i validate the table to play, table launch on my laptop screen instead of my alp . can you help ?
Thanks for another great video!!!! When I go to install I get "No internet connection", but it's connected to the internet. I've tried a few different times. Any thoughts?
Hi Frenchy, I hope you or your viewers can help, So I built a mini cab, using pinup Popper and Visual Pinball and everything has been working great. Went to use the cab and found my buttons controlling popper were doing weird things, basically not working properly at all. Exited rebooted windows tried games directly in VP and everything works fine, so I know my USB encoder is working fine. Went into popper settings, button config and it said I had a button conflict. Notice : Duplicate bindings found Duplicate keyboard binding function Game Prior. I tried clearing all my saved buttons which works, but the message remains, so all buttons empty none selected , so none of my buttons can control anything. I un-installed popper, restarted windows, did a clean popper install, error still there, disconnected USB Encoder, error still there. So I'm completely at a loss as to how to get rid of this error. Any help greatly appreciated. Cheers Alan PS I'm running the latest release of popper if that has any baring, although it was working fine before so! Update, out of frustration i deleted everything and reinstalled windows, a completely new installation of Pinup Popper, and low and behold the error is still there!
@@MajorFrenchy no buttons are configured I cleared everything back to zero ready to start setting up keyboard and usb encoder, still the error message is there, I may try PinballX as I've wasted so much time in this, such a shame the developer has no contact, as this seems like a major bug
Not really. You can ask in the Chat if you have a specific issue. Otherwise, i would suggest looking up some video tutorials , i have some , terryRed and Nailbuster have them as well.
@@MajorFrenchy What i meant is that if you want a real Pinball Cab that you build on your on, you can only use the shell of it, because simply everything else in the AtGames Pinball is not useable. Android instead of a PC, cheap Monitors etc. All that's left to use is the shell and it's buttons, maybe.
This makes setting up my controls and backglass so much easier.
Ok , so I've dropped PE completely but I can't get my Legends Gamer mini controller working. Maybe you can help me get my joystick n buttons working ?
Thanks so much for posting this. I just joined the discord & feel a little lost, but getting better. Thanks again!
Discord is so overrated unless you can babysit it in hopes of a reply which when asking for a help is 50/50. I just don't have the time to even be on Discord I guess. Its frustrating to say the least.
helpful stuff indeed. if you havent already, and are lookin for other vids to do, other variants of this video for Desktop play, DIY of varying setups (multiple display, only 2 display etc)(so not ATGames .. which, maybe there wouldnt be much difference for that); good stuff thanks for putting this out
Thanks for the video. Definitely gonna take a try at this once my vibs comes in March sometime.
Love the video Major Frenchy! Thank you!
I've tried this on 3 different machines and the Backglass never pops. I see the table, i see the backglass on popper, but when the table starts everything comes up except the backglass. Breaking my brain what automated part is not completing.
This video helped installing the popper but I'm a newb and I don't have any idea how to setup my atgames controller. Can anyone help?
Thank you for this Video!
How did you set in FP the Nudge Buttons and the Plunger for the ALP?
I never had my plunger set up in FP. It does not work. Nudge would be the software nudge. Map the nudge keys. Have a read at this article. pinballnirvana.com/forums/threads/analog-nudge-in-fp.19833/
Great video,can you upload a video explaining after to install Popper how to add all the tables of Visual pinball in it and other video of how to load tables of versions different of Visual Pinball(vp9 ,vp10.7,vp 10,8 etc..) thanks
What is your playfield screen size?
Thanks for taking all the time to make the video! One question that I have is regarding the DMD or other display (forgive my ignorance) that was on the Leprechaun playfield after you started. I have the same thing but didn’t know how to resolve it? Thanks again!
You can drag the DMD manually and set it. Have you tried this?
How do I map the plunger and the accelerometer ?
Hi, thank you for all this info. I’ve been messing around with this for 2 days and in need of some help. If you don’t have the vibs board and want to set it up like pinball fx are you able too? Or does this only work with the vibs board.
Hey, did you measure the flipper latency? Any tips to improve? Im currently at around 80ms on pinball fx. Cheers
i followed video....but when i launch front end, it turns sideways and table turns landscape mode!!
This is what I started......ALP...went to hdmi, OTG set for -90 display in windows....main screen in portrait and 2nd display landscape. 100% hard to maneuver in widows with the screen sideways which is why main screen is set to portrait mode.. ran baller installler...followed each step and front end turns to landscape mode and turns the right.
thisn is myn 3rd time trying to set this up and each time front end turns to the right in landscape mode.
what does the alp otg mode need to be set at and windows, main display needs to be set at?
Set all your screens in normal mode ( landscape ) in windows and in the front end , set 270 degrees . This is how I had mine setup
very cool
hello when i launch pinup everything shows correctly on my alp . but when i validate the table to play, table launch on my laptop screen instead of my alp . can you help ?
you will need to select the proper output in the vpx video settings. select your main display. That should fix your issues.
Thanks for this
Thanks for another great video!!!! When I go to install I get "No internet connection", but it's connected to the internet. I've tried a few different times. Any thoughts?
Hi Frenchy, I hope you or your viewers can help,
So I built a mini cab, using pinup Popper and Visual Pinball and everything has been working great.
Went to use the cab and found my buttons controlling popper were doing weird things, basically not working properly at all.
Exited rebooted windows tried games directly in VP and everything works fine, so I know my USB encoder is working fine.
Went into popper settings, button config and it said I had a button conflict.
Notice : Duplicate bindings found
Duplicate keyboard binding function
Game Prior.
I tried clearing all my saved buttons which works, but the message remains, so all buttons empty none selected , so none of my buttons can control anything.
I un-installed popper, restarted windows, did a clean popper install, error still there, disconnected USB Encoder, error still there.
So I'm completely at a loss as to how to get rid of this error.
Any help greatly appreciated.
Cheers Alan
PS I'm running the latest release of popper if that has any baring, although it was working fine before so!
Update, out of frustration i deleted everything and reinstalled windows, a completely new installation of Pinup Popper, and low and behold the error is still there!
Hi, what buttons are conflicting, and what is your buttons controller?
@@MajorFrenchy no buttons are configured I cleared everything back to zero ready to start setting up keyboard and usb encoder, still the error message is there, I may try PinballX as I've wasted so much time in this, such a shame the developer has no contact, as this seems like a major bug
Does the discord show you how to correctly add games to the correct folders so they work correctly with a backglass and controls?
Not really. You can ask in the Chat if you have a specific issue. Otherwise, i would suggest looking up some video tutorials , i have some , terryRed and Nailbuster have them as well.
Will this install work if I am playing vpx tables on a laptop?
Yes it will. Even on a MacBook or a linux machine
How did you get the haptic to work when you hit the flippers?
ua-cam.com/video/0BBe8f-iw8w/v-deo.html
wow!
Atgames Pinball... An expensive Cab Shell. 😅
It's not the cab shell that is expensive. The bulk of the expenses are due to the mods and the hardware that i am adding to it.
You bet! It's a GREAT easy avenue for entrance into the awesome world of Virtual Pinball.
@@MajorFrenchy What i meant is that if you want a real Pinball Cab that you build on your on, you can only use the shell of it, because simply everything else in the AtGames Pinball is not useable. Android instead of a PC, cheap Monitors etc. All that's left to use is the shell and it's buttons, maybe.