Super Glue and steel wool - stronger than steel
Вставка
- Опубліковано 11 вер 2024
- Pour glue on Steel Wool and fix everything! With just a drop of Super Glue and Steel Wool you can create a very strong bond between many materials using Steel Wool and super glue together, it is a much more effective and durable method than repairing using baking soda and super glue.
With super glue and Steel Wool you can repair all damaged items including how to fix broken plastic, fix leaky pipes, fix cracked plastic, fix leaky plastic, fix broken plastic, super glue if mixed with Steel Wool will have strong adhesion and can fix anything that is broken, this video contains how to fix anything that is broken, how to weld plastic, including plastic, iron and more. If You Like This Video Then Click On Like Button And Also Subscribe My Channel For More New Videos.
► Subscribe: www.youtube.co...
On the 321Dicas channel, you can learn about various inventions, scientific projects, handicrafts and DIYs teaching how to reuse or recycle.
© Copyright by 321Tips ☞ Do not reload
321 tips
#steelwool #superglue #diy
now I know exactly how to repair those "Kerpow!" animations that used to happen on the 1960's Batman series
Holy Toobox Batman!
Just use Bicarbonate of soda and superglue it’s how they fix chip in helicopter blades. Put the tape over the hole, fill with Bicarb that drip the suplerglue into the powder it sets like rock instantly.
Well, that's scary!
@@davidgagnon2849 😆😆Not big repairs, just things a bit bigger than stone chips. There’s a good video of the guy that the repairs telling the story of him getting a late night call to do a repair on a clients helicopter in a hanger. Then while working, someone called the police, when the hanger was raided by the police the guy tells how had to explain why he was sneaking around in the middle of the night in an international airport hanger with big 5kg bags of white powder (the bicarb of soda) in the boot/trunk of his car.
If it's just a small chip, you can do the baking soda first, but if it's a deeper gouge, do the glue first. You can end up with un-reacted baking soda & air pockets underneath the reacted glue since it can only penetrate so far before it solidifies & prevents further reaction beneath it. If we do the glue first, we can use any amount of baking soda, wipe away the excess powder, sand the new plastic into the desired contour, & then build on top of that plastic or fill any voids in it with more glue & baking soda.
great but why do you need to burn the wool?
Great idea. I sent this to a friend who suggested it would also work with epoxy glue if you wanted it to be used to patch an area or fill a hole with a stronger solution. Using quick setting epoxy you could also slightly mould it as it sets.
Epoxy glue will not be stronger than superglue and steel wool or especially super glue and baking soda my friend absolutely not
Thank you. You just gave me an idea how to repair a guitar case that has several cracks. And the manufacturer went out of business, so I cannot get the brand-matching case for the guitar. Woohoo!
Well done, and thanks. I will most likely try one of these repairs soon, so much plastic.
I’m a tool designer been working on hi end labs for ever
I’m sending you my most absolute Respect, Man”
Bonjour de la France........ Bravo, excellent travail
Iron Powdered,
No Longer Steel After Flame 🔥!
Ingenious and
Strong!
Super idea ❤
Mixing baking soda or cinnamon in with the granulated steel wool will make the cyanoacrylate set faster and stronger. Then make sure to sand the work. It will look much nicer and be much stronger. That is of course when it is embedded into the object, not just attached to a surface like in the video here.
A variation.... I have used Gripfill building adhesive mixed into steel wool as a very effective way of rodent-proofing gaps and cavities...
hei why are you over complicating thinsg? In my experience with rodents.. I learned that you can put even a plaster board of 1cm thick that is not a big deal to rodents to get thru. But if you make sure there is no draft of air passing by .. they will never try eating it. They are also builders. they know about where the obstacle is thick or sensitive. Because of air draft.
hangar trick Brilliant
I couldn't of left a like faster. Cool video
Brilliant!
does it go rusty?
Creative video, keep it up, thank you :)
Great idea and very informative vid nice one
2 words: steel stick
Great idea. Thank you.
Clever! Thank you.
Clever and awesome
Bella idea la proverò
MARAVILLOSO GRACIAS
👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿 ótimo ensino😊.
Ottimo, ben fatto
bonjour : j'ai essayer ,c'est excellent , je voudrais faire la même chose sur un radiateur voiture , que me conseiller vous comme colle svp merci
Obrigado por compartilhar! Parabéns!
Ciao, la punta schiacciata che hai messo al saldatore, si compra in negozio o te la sei fatta? grazie
He made it in another video, it's just a hammered and grinded (he used sand-paper) copper tube, it's very clever in my opinion
Сода. Просто сода. И суперклей.
Aí sim, boooa
Att: Weliton Marks - Desbravatube
In plaats van staalwol kan je ook sigaretten as gebruiken..
Super!!!
Con limaduras de hierro también tendrias el mismo resultado
Bro just turned steel wool into seasoning😂😂
عاشت ايدك
結構便利
Personalmente creo que no puede haber reacción química entre los diminutos trozos de acero y el pegamento de loctitte (cianocrilato). Otra cosa es mezclarlo con algún mineral alcalino como puede ser el bicarbonato de sodio o la arena común, en esos dos casos si que puede haber una reacción potenciando las cualidades originales del cianocrilato. Puede que esa reacción también tenga lugar entre ese tipo de pegamentos y los electrodos usados para soldar...
¡¡¡Un saludo!!! 😁😁😁🖐
This works in the same way as steel in reinforced concrete and glass or carbon fibre in resin It's not a chemical reaction between the component parts but phyics of the steel rods or fibres stopping cracks developing. The result is a stronger outcome than just using the concrete or resin on its own, plus in the case of fibre glass, you can shape the fibre glass or carbon fibre..
Genial!!!!!!!!!!!!!!!
Thanks for your comment
Можно не заморачиваться со стружкой, а посыпать клей пищевой содой
Nice and what is the green monster crawling on the floor? at 3:05 minutes?
люди, не чините ничего! дайте возможность экономике работать, купите - новое!
❤❤❤❤
süper
Тоже можно делать с содой
Крепче соды?
баллон убедил )).
So much wrong with this technique, I don't know where to start.
Please do ! …
@@olivvapor4873 First, the only adhesion is to the edge of the hole, and I can guarantee that's a very weak connection. The steel shards (actually iron because he burned it first) are aligned vertically because of the magnet, which adds zero strength, because you need some cross connection between the "strands" of iron to add strength.
Lastly you'll notice that he doesn't actually test the strength of the repair other than to tap on it lightly a few times. That showed nothing.
This video is basically UA-cam clickbait.
A real patch would have used fiberglass or carbon fiber and some kind of epoxy.
@@yeroca I completely agree with you ; that was my conclusion too !
I wanted to be sure …
Indeed that patch is just stuck on the edges … it should not last very long !
No, it is not. Anyone who thinks this is stupid.
Como se llama la cinta que usa
That is aluminium tape, nothing but metal and glue, if you buy one that is too thin it will be very fragile
Like mama said, *USE YOUR WORDS* _Descriptions would be better than _*_PORN MUSIC._*
süper(TÜRKEY)
テープは剝がす事を考えて貼らないとね
Зачем вата, тебе нужна просто любая пыль или стружка: сода, пыль от металла (возьми напильник), и тд...
Н2О will destroy it.
Since this brushes tend to get rusty very quiclky it´s a thing to think about.
+
Quella è lana di ferro non di acciaio - dici cose precise
А где её найти, эту вату?
Для мытья посуды продают,а так же хозмагазинах для чистки печек.