Automatic touchless Hand Sanitizer Dispenser V2.0
Вставка
- Опубліковано 8 вер 2024
- Automatic touchless Hand Sanitizer Dispenser V2.0
______________________________________________
I hope everyone can make it by following this video.
______________________________________________
If you like this video, don't forget to like and subscribe my channel=)))
Nice 😊😁😁 man
With out component details wht is the use of this video ..u shld indicate the part no and subtitles with electronic function otherwise no one will be able to make this device ?
let me help you for the electrical components used in this tutorial :
1. 18650 battery ( chargeable ) 3.7 V / 2100 mA or higher
2. Charging module TP 4056 for charging the battery 18650
Voltage input = 5 V, so you can use mobile phone charger or if the input voltage is higher than 5V, for example 12 V, then you must use adjustable DC voltage step down module ( from 12 V DC to 5 V DC )
3. DC water pump 3.6 V
You can use from portable water gallon DC pump or mini DC brushless submersible pump
4. DC Power Supply Jack / Female.
5. Battery holder for 18650 type.
6. Plastic pipe and bottle.
7. Plastic case for this unit.
8. DC power supply 12V or mobile phone charger.
9. ON OFF button
10. IR module E18-D80NK
May this info is helpful for you.
For relay trigger, you can change by using TIP32C.
Don't forget come to my page
It's not the IR mosule in the link u provided. Ur video seems to have used a good one with housing. Pl guide on the sensor u used in the video. Nice job
What about the relay ? Type ? 5v ?
@@senterterapibioglass3677 component details please
@@senterterapibioglass3677 Hey Sam One component detail is missing. The IC with which you connected Battery and IR circuit. What is that component and what is the specs.
By what name do i search all electronic components in market or online purchase? Please guide.
Great design. I liked the box selected. Neat work. Component list please.
Very good
This concept is perfect as a community level sanitizer dispenser, surely a go-to option for gyms, malls, parks, gardens, multiplexes etc. 👌🏽👌🏽👍🏽👍🏽
Dc submersible pump is getting melted if we dip inside And use it for few days. All plastics have melted. Any experience? All these big and small pumps are tested and usable only fir water medium. Could u pl through some light on this?
Hey, thanks for this awesome video, but can you please share some specific details of the components used in it.
Automatic Hand sanitizer dispenser will have the below components:
1. Pressure Pump Motor.
2. Relay Switch.
3. Sensors for detecting the objects.
4. Electromagnetic Valve.
5. Storage Tank.
6. RO purifier cable.
7. Body Case Cover Mold.
8. Timer Switch.
Get your professional hand sanitizer dispenser machine at the factory price from the manufacturer. check out the below link for more details. ua-cam.com/video/sdmGBTTIsRI/v-deo.html
I am selling auto hand senitizer machin @ 2400 rs. only . contact me on my whatsapp number 7071787570
how timing of dispense is controlling or its continuous until hand is front of sensor? Please reply soon
I also have same doubt is it having timer or continuously operates until hand is present in front of sensor?
Controller is there in relay module for delay
@@technohub8203 but this video says there is no controller and that's why it's cheap.
U know that really name
Timer module will be there. While hand is kept , trigger is sended from timer ic to main ic
Hii Samuel this was a great video, to educate people in such a challenging times thanks for everything and also i have one doubt which relay trigger module you have used will you let us know Part # or something would be a great help.
www.alpineinc.co.in/shop/
This may help you
Good Work and Best of luck
can you provide list of the parts used?
V good, but..u didn't tell Need of material nd where il get...
Click Here-:ua-cam.com/video/Ifa2_vd-tEc/v-deo.html
Contact:- 8285641156
Good job 👍
Veri good👍😎
Please tell the name of components used
Very nice video . We have created video and we can provide full support too. You can check our video too. Thanks
@@AutomationDude sir can u please tell me about the components with speciation
@@vishaljadhav2677 Automatic Hand sanitizer dispenser will have the below components:
1. Pressure Pump Motor.
2. Relay Switch.
3. Sensors for detecting the objects.
4. Electromagnetic Valve.
5. Storage Tank.
6. RO purifier cable.
7. Body Case Cover Mold.
8. Timer Switch.
Get your professional hand sanitizer dispenser machine at the factory price from the manufacturer. check out the below link for more details. ua-cam.com/video/sdmGBTTIsRI/v-deo.html
How can I reduce its quantity? If I do not remove my hand from it, then it keeps on. And the sanitizer keeps flowing. Do something that will auto off in 1 or 2 seconds.
Use pulse timer then
@@mohitsingh5665 what kind of that timer plz specify
Hello Sir,
For any type of Electronic circuit requirements you can contact us:
gmelectronicsystems@gmail.com
@@gmelectronicsystems2128 hlo r u dealing in electrical components
Can I ask for actual procedure? thank you, hope you'll read my comment
Excellent
I see some connector between bottle and pipe. What exactly have you used there ?
Automatic Hand sanitizer dispenser will have the below components:
1. Pressure Pump Motor.
2. Relay Switch.
3. Sensors for detecting the objects.
4. Electromagnetic Valve.
5. Storage Tank.
6. RO purifier cable.
7. Body Case Cover Mold.
8. Timer Switch.
Get your professional hand sanitizer dispenser machine at the factory price from the manufacturer. check out the below link for more details. ua-cam.com/video/sdmGBTTIsRI/v-deo.html
Please update the components used with its specification
Automatic Hand sanitizer dispenser will have the below components:
1. Pressure Pump Motor.
2. Relay Switch.
3. Sensors for detecting the objects.
4. Electromagnetic Valve.
5. Storage Tank.
6. RO purifier cable.
7. Body Case Cover Mold.
8. Timer Switch.
Get your professional hand sanitizer dispenser machine at the factory price from the manufacturer. check out the below link for more details. ua-cam.com/video/sdmGBTTIsRI/v-deo.html
@@gstguru7136 how are you. we are talking about circuit and you send us the fucking video.
I am selling auto hand senitizer machin @ 2400 rs. only . contact me on my whatsapp number 7071787570
hi, good video, I made somting similar, you have a great channel, greatings from Perú, I my channel I have many projects that yoy can like it,
Great work ....really amazing
Very nice sir. What is the sensor used. U didn't specify. Kindly let me the model and make. Seems to be ip65 protected photo sensor? Pl guide
Hi ..,Am prepared but plastic botil in side vacuum will be create how to solve...Plz...
Please, send list components com datails references? please, excelent product
I need this box from where I will get this
ua-cam.com/video/Twetxtd1TDQ/v-deo.html drop comment dude in this
I am selling auto hand senitizer machin @ 2400 rs. only . contact me on my whatsapp number 7071787570
where you can order the pump motor?
thanks for the idea
Good stuff 👍
Hi, you are Doen nice appliances. With quality products and perfect work. What are the total cost of this appliances.
Approx 2000/-
@@mohitsingh5665 hi, i need this product. plz share your contact to impelcad@gmail.com, whatsup: 87544 00500
Need whatsapp no 9322909922
@@MovieMastiWebTV CONTACTLESS SENSOR BASED SANITIZER DISPENSER.info@nextersolutions.com. PLEASE CONTACT -+91 9496344211
Simple and effective
Good very professional & Nice work keep it bro
Nice job ! can it also pump viscous material
bro, this looks amazing, great work
Good.... Dar40...
Sir apne jo machine banai h usme senitizer ki ek limit fix ki h kya ki ek baar sensor par touch karne par thoda hi asyega
Dear Samuel Please tell me the name of Module with 5Volt Relay + potentiometer
Can I ask the actual procedure?
Send the link to buy whatever you have used the electronic item in it.
May I know ur requirements 8884570727..
@@sudalemuthu8114 ir sensor water solenoid valve and it's attachments
@@vijayadsul4088 8884570727
www.alpineinc.co.in/shop/
U can buy it here
It's good project, but can you Indicate all materials needed,???
What is this name of the controller called? (with relay and potentiometer)
at minute 2:57 what is the name of that piece of plastic and the purpose of using it?
its a check valve i see
Could you please provide the wiring diagram and the reference number of the timing relay you are using?
Sper...
Can you send one for me...
I can pay money for meterials & for postage.....
I have similar type 8884570727....
Hi, nice Project, we would like to sponsor your project,
Would you like to have a sponsor on your channel?
Hi
Good work, congratulations.
I'm a 1000 subscritor =)
Hello guys, what is there beside the on/off button at 3:09?
Good job ✌ Can I know what type of relay you used?
Sir I have one doubt I have ultrasonic and relay v 1 channel . How to give connections from tp4056 module to ultrasonic and relay module sir. Kindly help me in this regard
Use microcontroller.. PCB kit available for automatic Hand Sanitizer at Amazon www.amazon.in/dp/B08CMXGWQ3/ref=cm_sw_r_wa_apa_i_IjUbFbGZDCX69
I am from hyderabad, so want to total circuit with pump what is the cost please tell me.
What did you use to make a hole in 0:40
Awesome work and Design. Component list please...would help. Thank you.
Automatic Hand sanitizer dispenser will have the below components:
1. Pressure Pump Motor.
2. Relay Switch.
3. Sensors for detecting the objects.
4. Electromagnetic Valve.
5. Storage Tank.
6. RO purifier cable.
7. Body Case Cover Mold.
8. Timer Switch.
Get your professional hand sanitizer dispenser machine at the factory price from the manufacturer. check out the below link for more details. ua-cam.com/video/sdmGBTTIsRI/v-deo.html
Where can we find body(box) like this
@@rohitkashyap1377
We can provide you the cabinet..
Pls call 8088881122
@@gstguru7136 what is the name of that sensor sir ?
Ye blank box kaha se mila
It's hard to make this without the parts list. Can you add it here?
I am selling auto hand senitizer machin @ 2400 rs. only . contact me on my whatsapp number 7071787570
Which motor driver is used
the box is sooo goood where i can buy it ???
Hello what is that relay you use?
Позвольте мне помочь вам для электрических компонентов, используемых в этом руководстве:
1. Батарея 18650 (заряжается) 3,7 В / 2100 мА или выше
2. Зарядный модуль TP 4056 для зарядки аккумулятора 18650
Входное напряжение = 5 В, поэтому вы можете использовать зарядное устройство для мобильного телефона или, если входное напряжение выше 5 В, например, 12 В, то вы должны использовать регулируемый модуль понижения постоянного напряжения (от 12 В до 5 В постоянного тока)
3. Водяной насос постоянного тока 3,6 В
Вы можете использовать от портативного водяного галлонового насоса постоянного тока или мини-бесщеточного погружного насоса постоянного тока
4. Разъем питания постоянного тока / женский.
5. Держатель батареи для типа 18650.
6. Пластиковая труба и бутылка.
7. Пластиковый корпус для данного устройства.
8. Блок питания постоянного тока 12В или зарядное устройство для мобильного телефона.
9. Кнопка ON OFF
10. ИК-модуль E18-D80NK
Пусть эта информация полезна для вас.
Для запуска реле вы можете изменить с помощью TIP32C.
Ele funciona em ambiente aberto a luz solar?
Bro pls tell me what are the items and power of that items
how long does a single charge last?
Could you please put up entire project details?
Hey bro
How to make Automatic Hand sanitizer full explained
ua-cam.com/video/hDQj7EB7zyA/v-deo.html
Hello Sir,
For any type of Electronic circuit requirements you can contact us:
gmelectronicsystems@gmail.com
@@gmelectronicsystems2128 sir I am from Delhi. Require circuits used in this, i want to buy. May i know that do you have these. And is it possible to get these in Delhi
@@MrigankAggarwal please share contact no.
@@gmelectronicsystems2128 9555255925
Super et en plus Je vais apprendre l’anglais avec toi ma belle 👍
Ho guru tell me the type of circiut board used and mechanism used
i can provide you circuit board @250 rs. only with ir sensor
sir which relay you took description please
Which sensor is used
Is it safe ?? Passing alcohol thru brushed dc motor ??.. this is really risky guys .. stay safe
Where i can get the box???
ITS GOOD,BUT NO INDICAT NAME ON SCREEN
Bro ur video seems interesting but its use less for us as u have not mentioned the spares details, at least u could have give the purchase link
www.alpineinc.co.in/shop/
This may help you
Plz give detail information
thanks a lot,i need the link of that motor
how can i get this type of box or container???????????????
www.alpineinc.co.in/shop/
We can provide you the cabinet
What's the program you aplied in the arduino
Can ANYONE please provide the detailed link/list of
* components required
* Block diagram
* CODING required
* Written Material
and everything in between?
I need the details for my Final Year Project
THANKS in advance... (:
Hope this may help you out
ua-cam.com/video/ctlAnaHP_zQ/v-deo.html
Iski samagri bhi btaey
What kind of that case used?
We can provide you the cabinet
Call 8088881122
Can you list all the parts ?
Tell me khaali box kaha se le
Can you list all the materials used?
Hi nice project, pls send the details
We have auto hand senitizer machine with IR based sensor @2500 rs. only to get directly from supplier contact me on whatsapp number 7071787570
www.alpineinc.co.in/shop/
Mr. Umesh
This may help you
Bro from where did u got the container
We can provide you the cabinet
Call 8088881122
can u please mention the circuit board part numbers
Hello Sir,
For any type of Electronic circuit requirements you can contact us:
gmelectronicsystems@gmail.com
I can provide you the circuit board @250 rs. only with ir sensor
Where will we get it from
What is circuit details where we can buy it?
let me help you for the electrical components used in this tutorial :
1. 18650 battery ( chargeable ) 3.7 V / 2100 mA or higher
2. Charging module TP 4056 for charging the battery 18650
Voltage input = 5 V, so you can use mobile phone charger or if the input voltage is higher than 5V, for example 12 V, then you must use adjustable DC voltage step down module ( from 12 V DC to 5 V DC )
3. DC water pump 3.6 V
You can use from portable water gallon DC pump or mini DC brushless submersible pump
4. DC Power Supply Jack / Female.
5. Battery holder for 18650 type.
6. Plastic pipe and bottle.
7. Plastic case for this unit.
8. DC power supply 12V or mobile phone charger.
9. ON OFF button
10. IR module (www.indiamart.com/proddetail/ir-infra-red-module-14530132633.html )
May this info is helpful for you.
Don't forget come to my page
@@senterterapibioglass3677 hlo can you breif how to make without using battery. Please give me your whats app number. I want the details of this project in detail.
and component list??????
Hola deseo saber como se llama el dispositivo q pones junto al envace
Sand the link from amazon to buy electronics parts
We have auto hand senitizer machine with IR based sensor @2500 rs. only to get directly from supplier contact me on whatsapp number 7071787570
How much it costs for all requirements
Tell the relay module name plz,?
if you can create more of it , i am ready to buy it in bulk
U have email can send u my own sample
@@jamemanga314 jackgurnani9212@gmail.com
CONTACTLESS SENSOR BASED SANITIZER DISPENSOR -info@nextersolutions.com.PLEASE CONTACT -+91 9496344211
sir, send me name of parts when two tube is connected , what is the connector the video running in timing of 3.01 sir till help me to make your project successful in time
Please send me details of this project. So I can checkout the price list in my country
let me help you for the electrical components used in this tutorial :
1. 18650 battery ( chargeable ) 3.7 V / 2100 mA or higher
2. Charging module TP 4056 for charging the battery 18650
Voltage input = 5 V, so you can use mobile phone charger or if the input voltage is higher than 5V, for example 12 V, then you must use adjustable DC voltage step down module ( from 12 V DC to 5 V DC )
3. DC water pump 3.6 V
You can use from portable water gallon DC pump or mini DC brushless submersible pump
4. DC Power Supply Jack / Female.
5. Battery holder for 18650 type.
6. Plastic pipe and bottle.
7. Plastic case for this unit.
8. DC power supply 12V or mobile phone charger.
9. ON OFF button
10. IR module (www.indiamart.com/proddetail/ir-infra-red-module-14530132633.html )
May this info is helpful for you.
Don't forget come to my page
What about spares
Kak mau tanya itu tipe IC modul mini nya apa ya kak ? Tipe/seri nyaa
pasame los materiales para construirlo, gracias
Pl detils of used component and avaibility
Can you pls tell complete part list
Relay model name or model No?
Can u pls tell components name and circuit diagram