Another excellent rebuild. Thanks for the video buddy. I have to say the fire always adds that little bit of excitement and drama to your videos. Kind of makes my day 😉
Haha thanks for the kind words! Fire is fun to play with My old UA-cam channel and forged line got shut down because the amount of dangerous stupid things I used to do but if you scroll down a little bit through my channel I do have a video of blowing up a can of starter fluid with an M80 Haha
Are rebuild kits expensive for every engine brand because novarossi wants 90 dollars for a piston sleeve and rod, and that’s not even with bearings yet so that’s like the price of a new engine. Are there engines that are cheap to rebuild?
Depending on the engine if you can get the parts cheap enough then sometimes yes sometimes no you can always send your piston and sleeve for a pinch which will make your engine like new again I'm only into this engine for $30 in parts
Hey man, have you ever had a problem where your engine runs too cool? My engine has this huge cooling head and even when I tuned it it reaches a max of 190 in 70 degree weather, if I lean the top more it will cut out, so maybe I should try to lean the bottom more.
@@thebug4046 I just got a Neo 3.0 and not in good shape. I found the pin and spring sitting at the bottom not in place. The buggy is a basket case. Thanks for the response brother.
I have a Kyosho neo, what is the part number for the connecting rod, I lost that little pin that goes on top of the spring( pin goes on the bottom of the connecting rod)
Hey man sorry I have no idea to be honest I've never worked on one of those before you'd have to look for an exploded view of the engine and look up the part numbers probably Google would be your best bet I'm not even sure what engine I truck has in it so I'm not very helpful when it comes to that
@@garyfaulk5250 be sure note Direction of the parts because you can put them together wrong. Be sure to oil all moving parts before and during assembly 😎
@@wolfgangmuschong2735 hit the Nitro RC enthusiasts group on Facebook im an admin in their post a video of the problem and we can help you a lot easier that way. Lots of really good guys in their and no bullshit. Just be sure to answer the 3 questions when Joining. See you there!
@@pcrashford5367 take it easy for 3 full tanks tuned on the rich side after that retune a and have fun make sure to oil all the parts When you are Assembling at the moving parts
Another excellent rebuild. Thanks for the video buddy.
I have to say the fire always adds that little bit of excitement and drama to your videos. Kind of makes my day 😉
Haha thanks for the kind words! Fire is fun to play with My old UA-cam channel and forged line got shut down because the amount of dangerous stupid things I used to do but if you scroll down a little bit through my channel I do have a video of blowing up a can of starter fluid with an M80 Haha
@@thebug4046 Now this I must see.. Thanks again buddy.
You and fire always make my day lol
Right on Haha
Thank you for video, great 👍
Moscow
Nitro engine no wd-40! ) thanks for the advice!
No problem
Cool video that was awsome thanks for making it.
No problem
Cant wait to see it rip🤘🤙 love the videos man!
Thanks man and when I can get a few starter parts I will make a running video
I have ke25 carb. Was hoping I can find some o rings to replace the low and high needles. Can t find oem parts.
Bummer see if you can find a hole carburetor
Are rebuild kits expensive for every engine brand because novarossi wants 90 dollars for a piston sleeve and rod, and that’s not even with bearings yet so that’s like the price of a new engine. Are there engines that are cheap to rebuild?
Depending on the engine if you can get the parts cheap enough then sometimes yes sometimes no you can always send your piston and sleeve for a pinch which will make your engine like new again I'm only into this engine for $30 in parts
Hey man, have you ever had a problem where your engine runs too cool? My engine has this huge cooling head and even when I tuned it it reaches a max of 190 in 70 degree weather, if I lean the top more it will cut out, so maybe I should try to lean the bottom more.
It's really hard to say without seeing it run running to cool of a plug can make for tuning problems as well
Do you know if KE25 and the KE25SP engines are interchangeable? Thank!
I'm sure most stuff is im not really sure what the difference is sorry
Do you know any substitutions for one way bearing or pull starts that will fit on this from other engines ?
Not so far.. kyosho engines suck ass nothing available and completely different from everything else
@@thebug4046 I just got a Neo 3.0 and not in good shape. I found the pin and spring sitting at the bottom not in place. The buggy is a basket case. Thanks for the response brother.
@@angelromero2689 oh lovely haha no worries and good luck on your project
I have a Kyosho neo, what is the part number for the connecting rod, I lost that little pin that goes on top of the spring( pin goes on the bottom of the connecting rod)
Hey man sorry I have no idea to be honest I've never worked on one of those before you'd have to look for an exploded view of the engine and look up the part numbers probably Google would be your best bet I'm not even sure what engine I truck has in it so I'm not very helpful when it comes to that
Thanks for the quick response back, I think I found it, took some time but I got 👍
@@garyfaulk5250 be sure note Direction of the parts because you can put them together wrong. Be sure to oil all moving parts before and during assembly 😎
Does this engine fit normal clutch kits. Like a savage 4.6 clutch. Will it fit this crank
Id imagine it would being a big block
Could you tell me the factory settings. Thanks
To be honest I have no idea what the factory settings are for any engine lol I just set them rich and work from there.
Thanks just having a hard time with this one.
@@wolfgangmuschong2735 hit the Nitro RC enthusiasts group on Facebook im an admin in their post a video of the problem and we can help you a lot easier that way. Lots of really good guys in their and no bullshit. Just be sure to answer the 3 questions when Joining. See you there!
I have a Kyosho neo nitro, what other nitro engine can I used (Please Help)
If it's a ⅛ car any 21 or bigger engine. Go to the Nitro RC enthusiasts group on Facebook
Is the ke21sp constructed the same way, like is the back plate assembly the same as this?
Also do i have to heat up the cylinder before reassembling?
Yup
thebug 404 also if you replace just the rod, do you have to wear the engine in or no?
@@pcrashford5367 take it easy for 3 full tanks tuned on the rich side after that retune a and have fun make sure to oil all the parts When you are Assembling at the moving parts
tell me can i use atf dextron 3 oil instead of after run oil?
Yes you can all i use You can even use full synthetic 5W20 Or you can even use air tool oil
@@thebug4046 thank you very very much 👍
@@vkvitalykainov6497 no problem