Okay, if you go back to the PART 1 video at 6:11 and forward, you hopefully can see how I take apart the lock button and the pin and the tiny spring, so it should be possible do it in the reverse order of the disassemble process to get it assembled again.
Regarding tri-flow PTFE, do you spray/collect it in a jar for an application like this? How does it behave in time? It looks like it has very low viscosity. Great video, thanks again!
+Mehmet Koray Pekericli I just spray Tri-Flow in a film container and let it stay open outside in a dry place, DO NOT...!!! put the lid tight on because the pressure, from the oil/air will simply blow the lid off just like a little fireworks, and the oil will spread all over the table...!!. I think the Tri-Flow works very over time, but it depence what lens it is. Of course, I still look for other type of oil/grease, and today I try to make a mix of Tri-Flow, and then I will put the focus block some days in my freezer in minus 18 C°, just to see how it feels when I take it out again.. More info sooner..
Need some help. At 8:00 when I screw in the retaining ring, it locks down the part it is retaining, so it will not rotate. What did I do wrong and how to fix it? Thanks.
There is more info about the Tri-Flow PTFE here:
www.triflow.co.uk/products/500ml-200ml/
Hi, what is the formular for that tri flow ptfe? is there a link where you got it from?
I currently use helimax helical grease.
Got it back together, but you did not replace the infinity lock in your video. How the heck does the spring go in to replace it?
I am desperate for help
Okay, if you go back to the PART 1 video at 6:11 and forward, you hopefully can see how I take apart the lock button and the pin and the tiny spring, so it should be possible do it in the reverse order of the disassemble process to get it assembled again.
Regarding tri-flow PTFE, do you spray/collect it in a jar for an application like this? How does it behave in time? It looks like it has very low viscosity. Great video, thanks again!
+Mehmet Koray Pekericli I just spray Tri-Flow in a film container and let it stay open outside in a dry place, DO NOT...!!! put the lid tight on because the pressure, from the oil/air will simply blow the lid off just like a little fireworks, and the oil will spread all over the table...!!.
I think the Tri-Flow works very over time, but it depence what lens it is. Of course, I still look for other type of oil/grease, and today I try to make a mix of Tri-Flow, and then I will put the focus block some days in my freezer in minus 18 C°, just to see how it feels when I take it out again..
More info sooner..
Need some help. At 8:00 when I screw in the retaining ring, it locks down the part it is retaining, so it will not rotate. What did I do wrong and how to fix it? Thanks.
Are you based in the UK?
Prema Goet I'm live in Denmark.