Your videos are wonderful to watch. Not shaky, great audio, and not overly verbose/off topic. I really appreciate the time and care you put into them, they are easy to watch and perfect when you want to know how to actually do something without the unrelated/off topic interruptions of many RV diy videos. Thank you so much!!!
Thanks so much for your feedback. I REALLY appreciate it. It can be difficult to find the right balance between show and tell. I prefer more "show" and less "tell". I'm glad you do too :)
Hi Brian, You described having recliners in the RV exactly right, "A game changer". I wouldn't be without them. You will soon say how did we stay in the RV without them. Your a DIY'er after my own heart. You pay attention to detail. I even noticed you twisted the wire before putting on the wire nuts---Bravo. Stay safe, Lou
We bought the same recliners for our Class C except non electric and in Toffee color. Ours were replacing a jackkife sofa that was incredibly uncomfortable. Our slide was not as deep as yours so we had to build it out to accept the chairs. My husband did an awesome job. It looks original. We used electrical conduit wall clamps on the front and back bars over a piece of 1" pipe to attach our recliners to the floor. We greatly enjoy your channel and look forward to your drama free videos and laidback attitude. We also plan to keep our 5 year old RV for many years.
Hope you're enjoying your recliners. We're looking forward to many years of comfort with these. I also picked up a couple 2" conduit clamps that I'll put over the back frame once I'm done tweaking things. Cheers!
One thing I admire about you Tito is that you always use the word "We" I always do that too, make sure my wife knows we're doing this together even if she's only watching me build it
Saw recliners at STL RV show last weekend then your video. Ordered pmod-70 tuesday. Arrived friday. Install in progress. Replacing jack knife couch in 2011 coachmen freelander 32 bh. Love and trust your posts.thx
That sounds great Paul. I sat in some Thomas Payne recliners at last year's RV show. I didn't get those, but it got me thinking...hmmm...recliners. So far my RecPro experience has been great. I appreciate your feedback and kind words. It means alot. Thx.
Your videos are so well done! This led my wife and I to purchase the same model. Love them! Installed in 10 minutes. Debating on to secure. Thing maybe Velcro- or just electrical hold downs. Thanks again
Great vid as usual. We changed the recliners couch in our new Crossroad cruiser. They were impossible to operate and weighed a ton. We upgraded to a lighter model and easier to use. We will be getting tied of the dinette set next. It’s heavy and not easy to use.
Really enjoy your informative videos, I was wondering if you mounted the chair to the floor. If so how did you do it. I will definitely need to mount it to the slide because of the overhang.
Excellent work! Super 77 is good stuff. I used to use it all the time when doing headliners on old Beetles. Good adhesion, but still repositionable as wrinkles needed "adjusting".
Excellent job so far. I got my reading lights from a boat supply store. They have all kinds of map and bunk lights. After you find what you like at a marine store, check Amazon and EBay for them, might save some money on them.
That looks great! A few years ago we had removed a dinette in our travel trailer and put in a reclining loveseat. I was very nice to be in the trailer and still as comfortable as home! Hope you enjoy!
(Update) Bolting the Recliners Down: I secured them to the floor with a couple 2" electrical conduit clamps on the rear frame. There are a couple holes in the frame where I could bolt them to the floor, but I like the clamp on solution better.
You can always use muffler clamps through a floor with flat stock... Lighting if you need some you can locate less from me or build custom plexy glass is awesome with leds. Simple and quick you can take vinyls and wrap some pain some install different bulbs. The only difference between DIY and profeccional Custom is I get paid by the customer
I had a feeling....I figured that to be the case. Once again...great video! I'm looking to do something similar, however I have an older class c without a slide and all my electrical and plumbing is located under one seat, and the fresh water tank is under the other one.
Thanks for the video and tip on source for the sofa, I'm getting ready to tackle the same. On the lighting, my class-C has a 12 vdc sconce lamps on the back wall, one on each side of the window, which will be above the back of the sofa. Perfect for reading or anything. It also has a 120 vac outlet on the same back wall so that part is also done. Thanks
Forgot to add a question. Since my crappy dinette is the only other bed beside bedroom, when I lose that my son is out of luck when he's with us. In your opinion when you have them reclined all the way out are they suitable/intended as sleeping positions? I went to the site and found jackknife and pull-outs, but neither recline, that's kind of a buzz killer. Thanks again.
Very nice upgrade and definitely will increase comfort in the RV - well said! I look forward to doing something like this in my Class C in the future. Thanks for sharing.
Looks really good! I can’t wait to put in our couch it’s been sitting in the garage for the last couple weeks. You motivated me to get it done before the Super bowl.
My worthless jack-knife loveseat met its demise last summer. I ripped it out and replaced with with 2 euro-style recliners I got from RecPro. I ordered the recliners at 6am on a Monday morning and the Fedex van showed up Tuesday afternoon at 3pm. Could not believe the service and how well the recliners are working out for us. My regret not doing this 3 years ago.
Hi Tito. I bought a manual loveseat from RecPro about 6 years ago. It is extremely comfortable BUT the material and stitching is falling apart. We only camp about 6 months out of the year on weekends and don't use the loveseat much. I thought it was a little pricy when I bought it but I disliked the loveseat that came with our 2018 Travel Trailer. I hope you have better luck with durability
We installed the RecPro recliners 2 years ago. The material is already starting to split on the back of one chair. RecPro would not stand behind their product but wanted to sell us a replacement back for $150. We declined that figuring that that one would probably do the same after awhile. Instead, we are having covers made for the backs at a local upholstery shop with color coordinated durable material. I suggest anyone using RecPro products keep an eye out for splitting fabric and contact RecPro before the warranty is up.
Those are some nice seats! better than what we have stock.....and one of ours seems to have broke, not sure what is wrong but it is stuck in the extended position. It might be a good reason to get something more plush, like those! Thanks!
I swapped out the single swivel chair with a Rec Pro swivel recliner. Love the chair but first long trip it de-assembled itself as 6 screws fell out going down the road. I'll use some lock-tite and hopefully prevent further issues. Still planning on the recliner swap out, just need more lock-tite.... Interesting how you take a RV and make it what you want. I've told RV salesmen over the years, it's obvious RV designers aren't into RV camping.
Came out very well,put led light (table light) those lights very cool shape and lots of color variety maybe I missed your earlier videos,my question: how you eat without dining table , what do you have across the chairs?
That overhead lighting - I would love to have dimmable LED laid down in a cove moulding so it was indirect uplighting right there. Was at Quarzite last week, vendors there really didn't have anything perfect out of the box.
I tried to look through the comments so I'm sorry if this is a repeat question, but didn't see if you put the width of your door? It looked like it was fairly tight going through the door. Great post showing the option of adding outlets for the power version. Thank you.
I may have messed up not ordering the powered version. I forgot you were using that type. I expect to remove the couch and install ours, early next week. I was under the impression that they would need to be fastened down to the floor but, unless I missed it, yours simply sits on the floor without being fastened to the floor? Thanks for all your wonderful videos and advice too. Good job!
I'm a late comer. I'm putting the same recliners (not electric) in my class c. I like the various ideas on how to secure the seats to the floor. Another question I have for everyone, do you use seatbelts? Thanks. Great video BTW.
Looks great! How did you secure them to the floor? You're usually pretty thorough. Did I miss that part or are you waiting to do that until you finish up some other things in case you need to move them?
I didn’t see you screw/bolt down chairs. Not necessary? Did you pull electric from another outlet? 60” wide space? Lastly, would you use Recpro seating again?
I'd like to save a couple of $ for sure...i need a charles 70 " powered. Let me know what I need to do to order one of them please. You're a great source of new ideas 💡 thks for sharing
Thanks for the suggestion. I've got several saved on Amazon already that are small with dimmers. Haven't made a final decision yet though, but probably one on each side mounted near the top of the side wall.
@@RVwithTito I've I stalled three of these bullet-style lamps. The dimmer and brightness levels, along with the swivel range make them very useful. Super easy to install!
I'm very much enjoying your videos about your renovations. Keep them coming! We have decided to do the same for our 10yr old class C. Question...where did you take the old couch and dinette for disposal?
You could always take it the dump or try to sell it. I still have the couch, dinette cushions, and some panels stored. The rest of the dinette frame was burned.
Hi Brian. Been watching your videos and have seen the great work you’ve done. Really cool. We’ve been looking at the same RecPro recliners. Just wondering how they’ve been holding up for you? Thanks. We’ve subscribed to your site and look forward to more videos. Thanks again, John & Vickie.
By chance did you put the dinette slide in without the carpet on the floor between the dinette and the couch? I want to remove that carpet and put in vinyl plank but not sure if the slide out needs the carpet to slide on. I have the exact same motorhome and any help is appreciated. Thanks Matt
Hi Brian, I watched your video last year and it motivated me to do this. We have the same basic floor plan so I love ALL your videos!!! Finally got around to buying the recliners and pulling out the dinette! (what else would I do during a Pandemic?) Now just waiting for them to be delivered. I do have one question, is there room under the base for the wires you had to not be Pinched? I have wires on both sides and am hoping not to have to move them. Thanks for all you do!
I want to do this too but I'm concerned about covering our dining room window. It looks like you had/have a window too. Did the chairs cover your window?
The overlapped the bottom edge of the window by a couple inches or so...enough to keep the roller shades from moving. We don't have that RV anymore so I don't have exact measurements. The website should state the height dimensions.
Very nice upgrade! How long till ya buy another for your home TV room? LOL! On/Off switch or do they always draw power? Painting? Did you need a primer? Sorry if ya covered & I missed! Thx!!
Thanks for the video. I assume those are wall huggers. Did you cycle them to full recline before attaching to floor to make sure backs aren't dragging on wall?
Yes they are wall huggers. I extended them fully a few times and adjusted the position so they wouldn't scrape the walls/blinds. I haven't attached them to the floor permanently yet. See the pinned comment at the top.
I'd like to ask how your recliners are holding up. There are some bad reviews on Recpro and peeling of the materials used on chairs, dinettes and jack knife sofa's
Great video. Question: I would think that the recliners would have to be to the floor. Are you concerned about them shifting when you drive down the road?
Hi Brian. Thanks for the video. I'm looking at replacing my sofa with these. Can you tell us what the actual model you purchased is? Probably the Charles 70"? Again, thanks.
Thank you for sharing these videos. Eventually I plan to do some upgrades to my RV. I did notice that it didn't seem you connected the chairs to the floor at all. Is that not necessary?
I've been looking forward to this video because I intend to install the 67" version of these recliners in my rig once it warms up outside. Originally, I was considering the manual version but the powered version is pretty sweet. I noticed they are 120v AC, is there a manual override in case you are boondocking and don't want to power up an inverter just to recline? It looked like you plugged in a DC transformer for each base so they are actually DC motors. I wonder if they make a DC hardware option?
I don't think there's a manual override or DC option (from RecPro). I run my inverter most of the time, so no problem for me. The motor runs on 24 volt so I plan on installing a 12-24v step-up converter like this (amzn.to/2CQwjep) so I can power it from my batteries. I'll be sure to post something if/when I get that working.
You can also buy rechargeable battery packs for recliners. They are easy to install, just attach inline with existing cords. They can hold a charge for up to a week or so with moderate use but could recharge every time you plug in or from an inverter while you are parked. This is what I ordered. www.amazon.ca/gp/product/B07G91FMLQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Thanks for your videos. I have a Jayco Greyhawk 2007 that we are remodeling. I ordered the same sofa today. I am considering connecting the wiring for the chairs to my inverter so that I have power while traveling or not on shore power. The other thought is to do a battery backup system. Did you consider this. My understanding is they will not recline without ac power. Thanks, Larry
Hi Brian, I learned a lot from your video. I am remodeling my 19 years old RV and I see in this video you painted over the wall paper. Is there any issue with it and what kind of paint you used. Please advise. Thanks
Thanks! Currently measuring to order our own recliner. Your positioning looks very similar to mine. Couch I want will take up entire space. I don’t see a gap between your couch and side wall. Any problem with rubbing when reclining?
Thanks for video. Removed and sold our sofa-bed. Now, to order recliners. Please tell me the RecPro item number you purchased. I assume you roughed in the 110v to the recliner area, did you video the AC wiring? Although I did note some comments on 12v operation, I am concerned about using only AC to operate the recliners. Can one manually operate the chairs without using the electric switch? Thanks.
Hey Brian, can you tell me if those recliners are "zero clearance"? When you reclined, it appears as they are as the seat moved forward, but it's hard to tell from the video. How much clearance did you have to leave behind the head of the seat to allow them to move? This is definitely on my to-do list this summer!!
QUESTION… PLEASE HELP… My fuse box is currently located under my jack knife sofa. I’d love to get recliners. Do you think there is enough room under the recliner to leave the fuse box under it? I have a class C much like this one. Thanks!
Hard to say. There are a lot of moving parts underneath. If you can reposition the fuse box you might find a spot that works, but it's doubtful because it needs to be in a spot where you can access it. Hmmm
Thanks for this video. I just took out my hide a bed for recovering of the disgusting Georgetown upholstery. I ordered the re pro recliners! Cancel the reupholstery. It was quoted at $1,500. The recliners are a better deal. Sorry I went to Amazon, not your link. Oh well.
this is great info and thanks for doing this, Do you know the depth of your slide from the inside wall to the end of the slide? Mine is only 33" and RecPro's website states 36" is required. I am OK if I have to push it up against the wall when the slide is not extended and I would pull the recliners out when the slide is extended, I have to make sure the frame will fit on the slide when the recliners are pushed back to the wall, thus the reason for my question
@@RVwithTito thanks for the response, do you think the frame would fit on a 33" slide if the recliners were pushed all the way back to the outside wall?
@@RVwithTito From your experience do you think the RecPro Recliners would fit on a 33" slide if I pushed the recliners all the way back against the wall. This would be what I would do when the slide is in, when I get to a destination I would open the slide and then pull the recliners out from the wall. I just need to make sure the frame of the recliners will fit on my 33" slide when not being used. My slide floor is above the main floor when pulled in. Thanks
Brian, those recliners look awesome and great job on all your videos. Two questions: 1. Were you able to bypass the AC to power the recliners directly from your battery? I'm concerned about getting power recliners and not being plugged into a power source. 2. How do you think the Rec Pro recliners compare to the Thomas Payne recliners?
Love your vids! One question, though. My wife and I have rather short legs. Can you tell me what the measurement is from the backrest to the front of the seat? If they're too long, we look like little kids with our legs poking out. . . Thanks!
Your videos are wonderful to watch. Not shaky, great audio, and not overly verbose/off topic. I really appreciate the time and care you put into them, they are easy to watch and perfect when you want to know how to actually do something without the unrelated/off topic interruptions of many RV diy videos. Thank you so much!!!
Thanks so much for your feedback. I REALLY appreciate it. It can be difficult to find the right balance between show and tell. I prefer more "show" and less "tell". I'm glad you do too :)
Hi Brian, You described having recliners in the RV exactly right, "A game changer". I wouldn't be without them. You will soon say how did we stay in the RV without them. Your a DIY'er after my own heart. You pay attention to detail. I even noticed you twisted the wire before putting on the wire nuts---Bravo. Stay safe, Lou
Thanks Lou. Yeah Melissa sat it them after I had them installed and just said.....Aaaahhh!
We bought the same recliners for our Class C except non electric and in Toffee color. Ours were replacing a jackkife sofa that was incredibly uncomfortable. Our slide was not as deep as yours so we had to build it out to accept the chairs. My husband did an awesome job. It looks original. We used electrical conduit wall clamps on the front and back bars over a piece of 1" pipe to attach our recliners to the floor. We greatly enjoy your channel and look forward to your drama free videos and laidback attitude. We also plan to keep our 5 year old RV for many years.
Hope you're enjoying your recliners. We're looking forward to many years of comfort with these. I also picked up a couple 2" conduit clamps that I'll put over the back frame once I'm done tweaking things. Cheers!
One thing I admire about you Tito is that you always use the word "We" I always do that too, make sure my wife knows we're doing this together even if she's only watching me build it
We thank you for your kind words.
I couldn't agree more.
I have noticed that too.
I sometimes think it is only "we" kinda people even notice.
Recliners are where it’s at. I’m typing as I sit in my recliner. Keeping the legs up is good too. Those are beautiful. Good purchase.
Saw recliners at STL RV show last weekend then your video. Ordered pmod-70 tuesday. Arrived friday. Install in progress. Replacing jack knife couch in 2011 coachmen freelander 32 bh. Love and trust your posts.thx
That sounds great Paul. I sat in some Thomas Payne recliners at last year's RV show. I didn't get those, but it got me thinking...hmmm...recliners. So far my RecPro experience has been great. I appreciate your feedback and kind words. It means alot. Thx.
Nice work! I think as we age, our comfort level increases.
Yes. We wanted something we could fall asleep in. These fit the bill.
Your videos are so well done! This led my wife and I to purchase the same model. Love them! Installed in 10 minutes. Debating on to secure. Thing maybe Velcro- or just electrical hold downs. Thanks again
The hold downs also help it from rocking when you get up. So I recommend something more than Velcro.
Man those are going to be soooo nice when traveling. The remodeling is going great! Sweet upgrade..
We're really looking forward the maiden voyage after the updates are done.
Beautiful work 👍 Thanks for all your wonderful ideas, Very Helpful to many of us out here 🤗
My pleasure 😊
Happy you both like them!! I look forward to seeing what you come up with as an end console
Me too :) It's a pretty narrow space.
Cool mod, nice video. Nice to see that your wife help with the color
On some things, it's better to get her input before rather than after if you get my gist ;)
Hehehehe YES
Those recliners look perfect. I'm so jealous.
Good job. You are very talented. Can't wait to see the end result!
Great vid as usual. We changed the recliners couch in our new Crossroad cruiser. They were impossible to operate and weighed a ton. We upgraded to a lighter model and easier to use. We will be getting tied of the dinette set next. It’s heavy and not easy to use.
Change is good!
Really enjoy your informative videos, I was wondering if you mounted the chair to the floor. If so how did you do it. I will definitely need to mount it to the slide because of the overhang.
Excellent work! Super 77 is good stuff. I used to use it all the time when doing headliners on old Beetles. Good adhesion, but still repositionable as wrinkles needed "adjusting".
Agreed. It comes in pretty handy for a lot of things.
Funny wife and i talked about taking couch out and doing that , she said you cant do that i showed her your video , thanks.
Lol. Never say can't :) Challenge accepted.
Excellent job so far. I got my reading lights from a boat supply store. They have all kinds of map and bunk lights. After you find what you like at a marine store, check Amazon and EBay for them, might save some money on them.
Thanks for suggestion. I do the same. I've got a West Marine close by too.
That looks great! A few years ago we had removed a dinette in our travel trailer and put in a reclining loveseat. I was very nice to be in the trailer and still as comfortable as home! Hope you enjoy!
That's our goal...to be as comfortable as home.
So far everything looks very nice 😎
Thanks! It's coming together.
(Update) Bolting the Recliners Down: I secured them to the floor with a couple 2" electrical conduit clamps on the rear frame. There are a couple holes in the frame where I could bolt them to the floor, but I like the clamp on solution better.
You can always use muffler clamps through a floor with flat stock...
Lighting if you need some you can locate less from me or build custom plexy glass is awesome with leds. Simple and quick you can take vinyls and wrap some pain some install different bulbs.
The only difference between DIY and profeccional Custom is I get paid by the customer
I had a feeling....I figured that to be the case. Once again...great video! I'm looking to do something similar, however I have an older class c without a slide and all my electrical and plumbing is located under one seat, and the fresh water tank is under the other one.
@@mikefredericks7288 ,
Do you have the ability to rout plumbing differently
Thanks for the video and tip on source for the sofa, I'm getting ready to tackle the same. On the lighting, my class-C has a 12 vdc sconce lamps on the back wall, one on each side of the window, which will be above the back of the sofa. Perfect for reading or anything. It also has a 120 vac outlet on the same back wall so that part is also done.
Thanks
Forgot to add a question. Since my crappy dinette is the only other bed beside bedroom, when I lose that my son is out of luck when he's with us. In your opinion when you have them reclined all the way out are they suitable/intended as sleeping positions?
I went to the site and found jackknife and pull-outs, but neither recline, that's kind of a buzz killer.
Thanks again.
Very nice upgrade and definitely will increase comfort in the RV - well said! I look forward to doing something like this in my Class C in the future. Thanks for sharing.
Yeah. We're pretty excited about it and looking forward to the finished product.
Looks really good! I can’t wait to put in our couch it’s been sitting in the garage for the last couple weeks. You motivated me to get it done before the Super bowl.
Haha. Get busy Jared :) I've had those big boxes in my garage for the last couple months. I'm glad to have the space back.
Brian nice job, you make it look so professional. Very strong 💪
Thanks!
My worthless jack-knife loveseat met its demise last summer. I ripped it out and replaced with with 2 euro-style recliners I got from RecPro. I ordered the recliners at 6am on a Monday morning and the Fedex van showed up Tuesday afternoon at 3pm. Could not believe the service and how well the recliners are working out for us. My regret not doing this 3 years ago.
That's awesome. My recliners came pretty quick too. Glad your loving yours.
Nice mod Brian! Dinettes are often a huge waste of space with poor back support. TV table does the trick for the 10 or 15 minutes hat you eat!
Totally agree. It served us adequately through the years as long as we added pillows for better support.
Awesome work Brian! That is an awesome set up you got there. Enjoy it
Thanks! We're lovin it.
I just did mine similar setup clamps to bolt down I was just wondering yesterday how to bolt them lol good vid
Hi Tito. I bought a manual loveseat from RecPro about 6 years ago. It is extremely comfortable BUT the material and stitching is falling apart. We only camp about 6 months out of the year on weekends and don't use the loveseat much. I thought it was a little pricy when I bought it but I disliked the loveseat that came with our 2018 Travel Trailer. I hope you have better luck with durability
We installed the RecPro recliners 2 years ago. The material is already starting to split on the back of one chair. RecPro would not stand behind their product but wanted to sell us a replacement back for $150. We declined that figuring that that one would probably do the same after awhile. Instead, we are having covers made for the backs at a local upholstery shop with color coordinated durable material. I suggest anyone using RecPro products keep an eye out for splitting fabric and contact RecPro before the warranty is up.
Those are some nice seats! better than what we have stock.....and one of ours seems to have broke, not sure what is wrong but it is stuck in the extended position. It might be a good reason to get something more plush, like those! Thanks!
I swapped out the single swivel chair with a Rec Pro swivel recliner. Love the chair but first long trip it de-assembled itself as 6 screws fell out going down the road. I'll use some lock-tite and hopefully prevent further issues.
Still planning on the recliner swap out, just need more lock-tite....
Interesting how you take a RV and make it what you want. I've told RV salesmen over the years, it's obvious RV designers aren't into RV camping.
Came out very well,put led light (table light) those lights very cool shape and lots of color variety maybe I missed your earlier videos,my question: how you eat without dining table , what do you have across the chairs?
I'm also building a desk/table/tv-stand on the other side. I'll also create a little clip on table so we can also eat from the recliners. TBD.
Great ideas, thanks
You bet!
Great video Brian!
Thanks Harrison!
That overhead lighting - I would love to have dimmable LED laid down in a cove moulding so it was indirect uplighting right there. Was at Quarzite last week, vendors there really didn't have anything perfect out of the box.
I'm looking for a dimmable option too. Yup. Rarely is there a perfect out of the box solution.
Very nice setup.
Looks Amazing.. Well Done..
Thanks!
Nice job!
thanks for sharing I did the samething I really enjoy the comfort better than the dinenet
did you have to use primer over your wallpaper
I'm sure we will too
I really like your recliners a lot
Awesome bro! Love those Recliners!!!
Yeah Eric. They really are awesome. We're lovin them!!
Would love to find those cup holders for my existing RV recliners for the lighted LED ring and the USB charging port. Very cool!!
Haven't checked, but I'm wondering if you can just get the cup holders. That would be cool.
I year late, and not exact, but here you go. www.recpro.com/usb-lighted-cup-holder-pair-for-12-center-rv-furniture-console/
I tried to look through the comments so I'm sorry if this is a repeat question, but didn't see if you put the width of your door? It looked like it was fairly tight going through the door. Great post showing the option of adding outlets for the power version. Thank you.
Taking our dinnete out for theatre seating also, ty for good info
Definitely getting one of these recliners to replace my stiff L shape
Great video as usual. Problem is...you have created a “Honey Do” list for me. LOL #BHGT18
Uh oh. Sorry about that 😃
Hey Tito. Love your Channel. I was wanting to know if you usually put a support for the slide out for the weight of the chairs and people
No extra support needed on mine.
I may have messed up not ordering the powered version. I forgot you were using that type. I expect to remove the couch and install ours, early next week. I was under the impression that they would need to be fastened down to the floor but, unless I missed it, yours simply sits on the floor without being fastened to the floor?
Thanks for all your wonderful videos and advice too. Good job!
I did eventually fasten them to the floor. So they're nice and sturdy.
I'm a late comer. I'm putting the same recliners (not electric) in my class c. I like the various ideas on how to secure the seats to the floor. Another question I have for everyone, do you use seatbelts? Thanks. Great video BTW.
I don't use seat belts. Personal choice. Never used them in the dinette either in 13 years.
Looks great! How did you secure them to the floor? You're usually pretty thorough. Did I miss that part or are you waiting to do that until you finish up some other things in case you need to move them?
You nailed it. I haven't yet, but I will. I added a comment at the top explaining.
Hi Brian,
I really appreciate your gift, of sharing your mods, I was wanting to know how are the recliners holding up after a little over a year?
Sitting in it right now 😊 We love them.
I didn’t see you screw/bolt down chairs. Not necessary? Did you pull electric from another outlet? 60” wide space? Lastly, would you use Recpro seating again?
What about securing then to the floor. They don't move when driving?
I'd like to save a couple of $ for sure...i need a charles 70 " powered. Let me know what I need to do to order one of them please. You're a great source of new ideas 💡 thks for sharing
Map lights .. Reading lights... something nice small..
Thanks for the suggestion. I've got several saved on Amazon already that are small with dimmers. Haven't made a final decision yet though, but probably one on each side mounted near the top of the side wall.
@@RVwithTito www.amazon.com/Motorhome-Interior-Lighting-Spotlight-Machined/dp/B079L3BXX4/ref=mp_s_a_1_10?ie=UTF8&qid=1548654895&sr=8-10&pi=AC_SX236_SY340_FMwebp_QL65&keywords=map+lights+for+rv&dpPl=1&dpID=41y4QXCtpQL&ref=plSrch
@@RVwithTito I've I stalled three of these bullet-style lamps. The dimmer and brightness levels, along with the swivel range make them very useful. Super easy to install!
How did you attach the couch? What trim did you use for the bottom corner of the slide near the floor?
Question, how did you anchor the seats to the floor?
I'm very much enjoying your videos about your renovations. Keep them coming! We have decided to do the same for our 10yr old class C. Question...where did you take the old couch and dinette for disposal?
You could always take it the dump or try to sell it. I still have the couch, dinette cushions, and some panels stored. The rest of the dinette frame was burned.
How do you fasten the recliners down to the slide out so they don’t bounce around when you’re driving.
I used a metal conduit clamp underneath on the rear part of the frame. It also helps when you sit up, so it doesn't rock forward. Good luck.
Hi Brian. Been watching your videos and have seen the great work you’ve done. Really cool. We’ve been looking at the same RecPro recliners. Just wondering how they’ve been holding up for you? Thanks. We’ve subscribed to your site and look forward to more videos. Thanks again,
John & Vickie.
Hey guys. They're doing great. Check out my new video coming out in a couple hours. I'll show you how they're doing.
By chance did you put the dinette slide in without the carpet on the floor between the dinette and the couch? I want to remove that carpet and put in vinyl plank but not sure if the slide out needs the carpet to slide on. I have the exact same motorhome and any help is appreciated. Thanks Matt
Hi Brian, I watched your video last year and it motivated me to do this. We have the same basic floor plan so I love ALL your videos!!! Finally got around to buying the recliners and pulling out the dinette! (what else would I do during a Pandemic?) Now just waiting for them to be delivered. I do have one question, is there room under the base for the wires you had to not be Pinched? I have wires on both sides and am hoping not to have to move them. Thanks for all you do!
Are the recliners bolted down to the floor? I didn’t notice that happening. I want to remove my sofa and replace with recliners as well.
Yes. I put a couple conduit clamps on the back.
I want to do this too but I'm concerned about covering our dining room window. It looks like you had/have a window too. Did the chairs cover your window?
The overlapped the bottom edge of the window by a couple inches or so...enough to keep the roller shades from moving. We don't have that RV anymore so I don't have exact measurements. The website should state the height dimensions.
Nice Job..! You have to bolt in the recliners..? Or is not nec..?
They stay in place pretty well, but I do plan on bolting them down. See pinned comment at the top.
Clean Brian... do the recliners bolt to the floor at all? What is the interior width of your dinette slideout?
I'll bolt them down later (see pinned comment at the top). These are 70" wide. There is also a 67" wide one.
Very nice upgrade! How long till ya buy another for your home TV room? LOL! On/Off switch or do they always draw power? Painting? Did you need a primer? Sorry if ya covered & I missed! Thx!!
Thanks for the video. I assume those are wall huggers. Did you cycle them to full recline before attaching to floor to make sure backs aren't dragging on wall?
One more thing - you do really nice work. A lot better than a normal shop would do.
Yes they are wall huggers. I extended them fully a few times and adjusted the position so they wouldn't scrape the walls/blinds. I haven't attached them to the floor permanently yet. See the pinned comment at the top.
I'd like to ask how your recliners are holding up. There are some bad reviews on Recpro and peeling of the materials used on chairs, dinettes and jack knife sofa's
Still in great shape. No issues really. I use the cleaner and protector spray every few months. I'd get them again.
Great video. Question: I would think that the recliners would have to be to the floor. Are you concerned about them shifting when you drive down the road?
I added a comment to the top explaining. I do plan to bolt them down, but not yet.
Hi Brian. Thanks for the video. I'm looking at replacing my sofa with these. Can you tell us what the actual model you purchased is? Probably the Charles 70"? Again, thanks.
Links to them are in the description.
Thank you for sharing these videos. Eventually I plan to do some upgrades to my RV. I did notice that it didn't seem you connected the chairs to the floor at all. Is that not necessary?
Check the update I pinned to the top. I'll bolt them down later.
I've been looking forward to this video because I intend to install the 67" version of these recliners in my rig once it warms up outside. Originally, I was considering the manual version but the powered version is pretty sweet. I noticed they are 120v AC, is there a manual override in case you are boondocking and don't want to power up an inverter just to recline? It looked like you plugged in a DC transformer for each base so they are actually DC motors. I wonder if they make a DC hardware option?
I don't think there's a manual override or DC option (from RecPro). I run my inverter most of the time, so no problem for me. The motor runs on 24 volt so I plan on installing a 12-24v step-up converter like this (amzn.to/2CQwjep) so I can power it from my batteries. I'll be sure to post something if/when I get that working.
You can also buy rechargeable battery packs for recliners. They are easy to install, just attach inline with existing cords. They can hold a charge for up to a week or so with moderate use but could recharge every time you plug in or from an inverter while you are parked.
This is what I ordered. www.amazon.ca/gp/product/B07G91FMLQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
low maintenance ♡~
Thanks for your videos. I have a Jayco Greyhawk 2007 that we are remodeling. I ordered the same sofa today. I am considering connecting the wiring for the chairs to my inverter so that I have power while traveling or not on shore power. The other thought is to do a battery backup system. Did you consider this. My understanding is they will not recline without ac power. Thanks, Larry
Hi Brian,
I learned a lot from your video. I am remodeling my 19 years old RV and I see in this video you painted over the wall paper. Is there any issue with it and what kind of paint you used. Please advise. Thanks
Thanks! Currently measuring to order our own recliner. Your positioning looks very similar to mine. Couch I want will take up entire space. I don’t see a gap between your couch and side wall. Any problem with rubbing when reclining?
Thanks for video. Removed and sold our sofa-bed. Now, to order recliners. Please tell me the RecPro item number you purchased. I assume you roughed in the 110v to the recliner area, did you video the AC wiring? Although I did note some comments on 12v operation, I am concerned about using only AC to operate the recliners. Can one manually operate the chairs without using the electric switch? Thanks.
Hey Brian, can you tell me if those recliners are "zero clearance"? When you reclined, it appears as they are as the seat moved forward, but it's hard to tell from the video. How much clearance did you have to leave behind the head of the seat to allow them to move? This is definitely on my to-do list this summer!!
They only need 3 inches of clearance from the wall.
@@RVwithTito Awesome, thanks for the reply (I found the answer later on the manufacturer's website...sorry!)
QUESTION… PLEASE HELP… My fuse box is currently located under my jack knife sofa. I’d love to get recliners. Do you think there is enough room under the recliner to leave the fuse box under it? I have a class C much like this one. Thanks!
Hard to say. There are a lot of moving parts underneath. If you can reposition the fuse box you might find a spot that works, but it's doubtful because it needs to be in a spot where you can access it. Hmmm
Thanks for this video. I just took out my hide a bed for recovering of the disgusting Georgetown upholstery. I ordered the re pro recliners! Cancel the reupholstery. It was quoted at $1,500. The recliners are a better deal. Sorry I went to Amazon, not your link. Oh well.
Yeah. New recliners sounds like the better deal. Enjoy!
Since you changed the cafe booth to recliners, have you had any problem with the extra weight making a problem for the operation of the slide?
No. not at all. Removing the dinette and everything under it made a difference too.
Might be time to upgrade to a NEW 2020 Class C Brian?
How are the recliners? Thinking about the 3 recliner sofa.
They are awesome. My friend Jared @ All About RVs channel installed the triple recliner sofa in his 5th wheel. You should check out his install video.
this is great info and thanks for doing this, Do you know the depth of your slide from the inside wall to the end of the slide? Mine is only 33" and RecPro's website states 36" is required. I am OK if I have to push it up against the wall when the slide is not extended and I would pull the recliners out when the slide is extended, I have to make sure the frame will fit on the slide when the recliners are pushed back to the wall, thus the reason for my question
Mine is exactly 36 inches
@@RVwithTito thanks for the response, do you think the frame would fit on a 33" slide if the recliners were pushed all the way back to the outside wall?
@@RVwithTito From your experience do you think the RecPro Recliners would fit on a 33" slide if I pushed the recliners all the way back against the wall. This would be what I would do when the slide is in, when I get to a destination I would open the slide and then pull the recliners out from the wall. I just need to make sure the frame of the recliners will fit on my 33" slide when not being used. My slide floor is above the main floor when pulled in. Thanks
Love my powered love seat hope to win rv recliner
did you have to use primer before you painted the wallpaper
We got the paint with the primer built in.
thanks@@RVwithTito
hey brian where is your black and grey tank clean video???
don't you bolt / screw the seats to the slide base? I was hoping you would cover that step.
I did anchor the seats down with conduit straps later.
@@RVwithTito Do you just screw the straps into the slide floor, or bolt them from below?
So Brian, you have an inverter so you don't have to either be hooked up to shore power or have a generator on to make these move?
Yes. I have an inverter. I'm also going to try and bypass the AC and power these from my batteries.
Brian, those recliners look awesome and great job on all your videos.
Two questions:
1. Were you able to bypass the AC to power the recliners directly from your battery? I'm concerned about getting power recliners and not being plugged into a power source.
2. How do you think the Rec Pro recliners compare to the Thomas Payne recliners?
How would you compare to what you have to Flexsteel?
Love your vids! One question, though. My wife and I have rather short legs. Can you tell me what the measurement is from the backrest to the front of the seat? If they're too long, we look like little kids with our legs poking out. . . Thanks!
I measured 21 inches.
@@RVwithTito Thanks! Appreciate it!
I am not Neil , looks nice and comfortable , bet you can sleep in those recliners ?
Yes you can. Yes I have :)
Are the seats screwed into the floor into the wood or are there studs?Mine was loose when I bought it but now they're flopping around.
I have the frame anchored down.
How would you add seatbelts to something like this
Don't think you'd want seatbelts at that angle...wouldn't be safe. You'd have to be facing forward.
Not secured to the floor? No seat belts? I can understand that in a trailer but not a class C. Good vid but missing those two items IMO.
Yes. They are secured to the floor. I did that after making the video.
May I ask how tall you are? My husband is 6’, I’m 5’2”. The height of the back looks perfect for your height.
Sure. I'm 5'9" and my wife is 5'5"
How did you get the bottom of the slide out to pop up.?