I had the same problem, but there was neither a light nor a display error. He just didn’t want to go down and turn it on all the time. Then I pressed the park hold button a couple of times and pulled the parking brake button back and down, drove one lap and then somehow everything was in place again.
Mksaozooaoqoott the only thing I could it be possible to get the same the same the same the same the same the same the same the same the same the same the same the same the same the
قال المدرب قياده السياره اذا لم يعطيه تلميذ مال مثل ما يطلب ما في شهاده قياده السياره اعطينا 3000 سياره اعطينا 3000 يورو لسه ما طلب سعر سياره فقال العمل في التوف لي ماذا لم تحط النظاره وانا لسه ما طلعت السياره لغه فحص قياده السياره قال انه هو بيته الأمر ولا احد يستطيع ان يحاسبه لانه يستطيع انا طالع شهاده لابنائه وهو كبير وانا صغير ومعترف عليها اذا لم اخذت الشهاده ترد المال الى الى /// ماذا قال قانون الحكومه لي الشعب او الناس
Exactly! I don't understand why people (even professionals) tend to use an open-end wrench when they could be using a box-end wrench or socket. No point to ruin hands and no point to round off the bolt.
He haven't gloves but he do the job correctly ! Thanks for tutorial. I have a question about the rear break, if there's the electric parking brake i know there's to unlock the electric motor with the maintenance soft via ODB. But before to do the rear pads change, it's necessary to unlock the electric engine of the electric brake parking, when you open there's to push the brake piston like in the front brake, my question is to push the rear piston it's OK like for front brake just pushing with a simple pusher (flat spacer) or there's to PUSH AND ROTATE with a pusher (teeth spacer) who have teeth will lock in the piston head to make push and rotation at the same time? Thanks for reply best regards.
I gave you a thumbs up like , for doing all this with one hand.
Could you show replace of rear brake disc please?
You should use torque wrench for tighten the caliper bolts to 35Nm
Thank you. Very helpful. Now you don't need to use any lubricant for bad ears where connect with bracket ? Thanks
Clear video, used gloves is better for your hands ( brake dust in the wounds ) 👍
where is the connector of the ABS system?
There is ATE lubricants for pad and for brake piston.
Good video and instructions. I’ve this to do on my daughter in laws tonight
Do you need scan tool to wind back piston for front pads or is it just rear ?
just rear
I had the same problem, but there was neither a light nor a display error. He just didn’t want to go down and turn it on all the time. Then I pressed the park hold button a couple of times and pulled the parking brake button back and down, drove one lap and then somehow everything was in place again.
Seems the brake disk need preplacement too
Where is your workshop?
hello, i converted front brakes from288mm to 312mm do i have to do adaptation with vcds?
Dude, use gloves..Almost every video when you doing something on your car, u have blood on your hands.
Thanks man, appreciate your help and video. Have a great day👍🙏
great video! at 14:01 what does the green symbol on the dash mean? parking brake in green?
Kriwhk
Mksaozooaoqoott the only thing I could it be possible to get the same the same the same the same the same the same the same the same the same the same the same the same the same the
@@rorykiff8503?
..on my 2015 TDI, that green indicator tells you that PARKING BRAKE (handbrake) in engaged.
It means auto hold is engaged
Cheers mate just done them after watching you piece of cake 👍
Record Rear change new pads pls
Mozes mi reci zasto. Moj auto ima crni ausspuf koji sensor ne radi
Kakve godine se napravi automobil. stariji automobil je normalan ako postoji crni ispuh
thank you so much for this. awesome. can you please show replacing the spark plugs and also the clutch on mk7 golf TSI please
Those discs are done
Palec hore za ten tripod,alebo stojan čím točíš videa 👍
Lepšie sa pracuje s oboma 😉
Merci bien Monsieur!
Trés précieux, votre video!
Bonnes chances
don't we put grease on anymore to stop rattling / squeaking?
Yes it it always recommended to put anti seize on most places of the caliper and brackets
Always put brake grease on
Спасибо за видео 👍.
Kao da si Balkanac....🤣🤣🤣🤣👍👍👍
North west balkan. Slovakia
@@golfwagen4173 ok man.👍😉😉😉😉😉😉
Nice video.
Grande come sempre!!!!!!!
Thanks for the sharing！and please do use gloves！
good work ..Your country
good video
Blood, sweat and tears. 👍
You are 👍
Super!!!!!!
Always use ring spanners or sockets, I'm surprised he didn't cut his knuckles or wrists, back yard mechanic, dangerous!
قال المدرب قياده السياره اذا لم يعطيه تلميذ مال مثل ما يطلب ما في شهاده قياده السياره اعطينا 3000 سياره اعطينا 3000 يورو لسه ما طلب سعر سياره فقال العمل في التوف لي ماذا لم تحط النظاره وانا لسه ما طلعت السياره لغه فحص قياده السياره قال انه هو بيته الأمر ولا احد يستطيع ان يحاسبه لانه يستطيع انا طالع شهاده لابنائه وهو كبير وانا صغير ومعترف عليها اذا لم اخذت الشهاده ترد المال الى الى /// ماذا قال قانون الحكومه لي الشعب او الناس
Thank you for showing!! Nice job! But. Please use gloves!! 😁
Mohol by si dať aj zadné.... neviem ako to je s tou parkovacou brzdou
ved sa na to chystam ....... už rok.
Dude wear some gloves and use closed wrenches (ring or socket). No point to ruin hands and make them bleed. Good job thou.
Exactly! I don't understand why people (even professionals) tend to use an open-end wrench when they could be using a box-end wrench or socket.
No point to ruin hands and no point to round off the bolt.
He haven't gloves but he do the job correctly ! Thanks for tutorial.
I have a question about the rear break, if there's the electric parking brake i know there's to unlock the electric motor with the maintenance soft via ODB.
But before to do the rear pads change, it's necessary to unlock the electric engine of the electric brake parking, when you open there's to push the brake piston like in the front brake, my question is to push the rear piston it's OK like for front brake just pushing with a simple pusher (flat spacer) or there's to PUSH AND ROTATE with a pusher (teeth spacer) who have teeth will lock in the piston head to make push and rotation at the same time?
Thanks for reply best regards.
Torque your bolts.
It’s ok I think lol😂
u went from easy to difficult because u do not use the right tools. I will never do that~
That's terrible job, everything in the wrong way around. Guys, don't do like that!