You a real one for this my dude! I was 30 seconds away from calling the dealership for my issue. This video saved me time, frustration and a phone call. Appreciate you!
@@John-k1x1p none of my stuff was working, my radio screen suddenly had blue accents and was saying “Chrysler” until I reset it per this video. Then it went back to Dodge and red accents and worked as normal.
Yooooo thank you i disconnected my battery for 30 min after an oil change so everything can reset. My charger had a Chrysler screen with no audio and back up camera wasn’t working. This worked instantly!
Sweet! The '14 & '15, you held the volume and tune center buttons together. Something changed between the '15 and the '18 and I couldn't figure it out!
MIND DOES THE SAME THING..I RESET IT..WORKS A DAY R TWO..THAN REBOOTING AGAIN..DEALERSHIP SAY BRING IT IN WE WILL FIX IT FOR A CHARGE..BE SAFE EVERYONE
Thank you very much my screen went pitch black ⚫ and I was very surprised 😮 and simply didn't know what I did ____ then BOMB! Like 👍 KOBE I!! In the 4th QTR bruh your vid was a life saver. My screen is back on and running like a champ 🏆 again 💫💫💫💫💫. Keep up the good work bruh and Bless up 😇🙏🏾🤙🏾
Thanks for the tip but I got one question how do you make the sound cuz I just bought a car a Dodge Challenger and the sound is not working can you show me how?
If sound is coming out of 1 speaker, you may need to check that your wiring is fully connected to the unit. Also, and I know this may sound trivial, but check your sound balance to make sure the speaker icon is in the middle of the diagram.
my 2020 charger scatpack won’t initialize bluetooth. tried to use multiple methods including this but nothing works to reset it. i might disconnect the battery when i get home and see if my uconnect 8.4 bluetooth starts to work again. might check after work before i go home if it just fixes itself 😢
I had to disconnect my battery at 1 point connected to back roll for about 10 to 15 minutes. And everything went back to normal so hopefully this will work for you
Will this work on a 2019 dodge? Bc I’ve tried it and it didn’t do it. And I also tried holding down the power button and tune button together and no luck
2016 Durango R/T uses a different soft reset method. with engine/key in RUN mode, hold down the big round (left/right) Volume & Tune buttons for at least 10 seconds until the screen goes black, then release to allow the soft reset. this may have fixed a Bluetooth and USB connection issue I was having. EDIT - Lost the bluetooth (audio-only) connection after i restarted my Durango. so with engine running, I did the Uconnect soft reset again and BANG the bluetooth audio automatically started playing a podcast I had open on my iphone. so maybe I will have to keep soft resetting every time I want Bluetooth audio? I will report back if that’s the case… EDIT 2 - at this point, I’m sure I am not the only one getting this repeated problem, but the Uconnect’s Bluetooth audio connection immediately stops when I simply switch iphone apps to the UA-cam app from an Apple Podcast that’s already playing normally over bluetooth as it should. why would Bluetooth or Uconnect care what app I am using? UA-cam previously played audio over Bluetooth just fine before this connection issue started a year or two ago. only solution I have found is to use a lightning-to-headphone adapter and plug into the AUX/input to get hardwired audio from my iPhone, which I have got used to before I started troubleshooting again today. now I’m thinking it may be an iOS or android update issue that’s affecting the Bluetooth connection to this older 2016 Durango’s Uconnect system which also doesn’t support Apple CarPlay or android auto. I also did an official mopar OTA update to Uconnect 1-2 years ago, as well as a paid USB-stick update for new GPS maps, but I don’t recall if the Bluetooth audio problems started after that. But I should have a fairly up-to-date Uconnect firmware so who knows. back to using hardwired AUX/Line-in I guess…
It sounds like you're trying to use Apple Play on a system not designed for it. If when you switch apps on your phone and your bluetooth goes out? That's your phone cutting it off, not it's target. The U-connect wouldn't know the difference unless it's video. I have an 18 Charger and it works very well with my phone, but it's Android. That might or might not make a difference. My car won't let you play any videos on the central screen however. It's illegal. If the passenger side has a separate screen, that's allowed. Or back seat screens is allowed. But not a central screen in view of the driver. I understand there are hacks available, but that might be what you're up against.
Unfortunately I had to give up using Bluetooth after I concluded the last Uconnect software update I ran must have permanently messed it up. So now I just run a short cable from my iphone to the Durango's Line-in port which works every time. my 2016 Uconnect system never had Apple CarPlay, but I have had other issues since the last Uconnect update that affected the car's GPS memory and preferences as well.
Take out the fuse from the fuse block with the car off. keep it out for 2 minutes and put it back in. That should cause a master hardware reset. @@Schweigardt
This only actually worked once and that was the first time I tried it yesterday. Does this mean there is something more wrong with my Bluetooth and Uconnect?
Hi I have the same make and model and I was able to get it to work by doing what Keith said just on the opposite side of the screen top left corner . Good luck
@Armondo Cortez my booth tooth is hit or miss at best. Sadly I can no longer rely on Bluetooth in my car. I just us the car play. Are you having the same issue?
Is this year or model specific....I tried this on my 18 RT and it doesn't reset....I've tried it several time holding down for 10 sec 15 sec 20 sec 30 sec.....I'm probably doing it wrong 🤷🏽♂️
So for the first time ever this reset didn't work and its always been my go to whenever the USB ports act stupid but today no matter how many times I reset they still don't work so what should I do next, disconnect battery?
2018 chrysler 300s, uconnect with no nav (I believe they changed it for 2018 models and after) 1. Car in run mode 2. Click on the Phone icon. (Will read no phone connected). Do not x out of this screen 3. Hold the top right corner of the screen for about 13 seconds *It may take longer. Let go when chrysler logo appears 4. Uconnect should soft reset.
When you disconnect the battery, your radio might show the Chrysler logo instead of the Dodge logo. It happened to my radio when I got a new battery. I just turned the car off for about 10 minutes and then turned it back on.
Hello, thank you so much for sharing the information. however i am still having some issues. everything connects to the bluetooth but as soon as I try to call someone, the voice disappears, same thing happens when i receive a call. i have to switch the call to my phone and then talk which is a quite a pain while driving. do you have nay suggestions. Thanks my car is the dodge caravan 2013
My uconnect in my Durango gets stuck every time I sit in it after I've turned it off and when the radio shuts off. Then the next time I go to start it up the screen will not work, and gets stuck on the loading screen, the music still plays but I won't have access to any controls. Does anyone else have the same problem? Mine is a 2018.
I have exactly the same problem as you! I'm a dodge charger and when I took off the screen cover, it was very hot inside. Have you found a solution yet?
I had to boost My 2017 5.7l rt and now my screen is completely different and shows Chrysler instead of dodge. Also the radio will not work even at full blast
was NOT able to get to the soft reset on my 2016 Durango R/T. my iPhone or android phones seem to pair Bluetooth normally, but there is no audio through Uconnect. and Uconnect won’t even recognize the iPhone when using a lightning-USB cord plugged into the console. my guess is Chrysler pushed out an OTA update to the Uconnect which messed things up. EDIT - I just used the L/R Knob soft reset method (below) and looks like my bluetooth issue was fixed. Someone else said that Uconnect gets stuck when you use other input methods like USB or AUX/Line- in, and it won’t take audio from Bluetooth even though the phone pairs normally. Try holding down the big round volume & tune buttons for 10 seconds until the screen goes black, with engine/key in run mode, and your problem may be fixed.
You a real one for this my dude! I was 30 seconds away from calling the dealership for my issue. This video saved me time, frustration and a phone call. Appreciate you!
Facts this here love you for this vid works on chrysler 300s ❤
Same here I’ve been having this issue with my 2017 challenger
You saved me!!! Awesome! Just got my car 2 days ago and screen went crazy! Nothing in owners manual. So glad I found your channel video! Thank you!!!
Out of all the videos I looked at this was the most helpful and actually worked
Hey, thank you so much for this. I'm over here ripping my car apart trying to figure out why I have no sound. Soft reset nailed it. Subscribed.
Bro big help! I’m a car salesman and had to jumpstart our challenger. The radio wouldn’t work, you just helped me with a sale man thank you so much!
I'm glad you got the sale! Work hard, play hard!
Saved me mine legit was saying Chrysler on boot up and barely working out of nowhere it started doing that now it’s good
Dude this saved me a trip to the dealership after I replaced my battery on my Challenger. THANK YOU.
My performance pages and back up camera stopped working after I reconnected my battery. Did you have the same issue? And if so did this fix it?
I'm my V6, I don't have performance pages, however, my camera didn't work at first. I did a couple of start/stop cycles and it came back on.
@@John-k1x1p none of my stuff was working, my radio screen suddenly had blue accents and was saying “Chrysler” until I reset it per this video.
Then it went back to Dodge and red accents and worked as normal.
I just did the soft reset everything is back to normal thanks for the help. Stress relieved 👍
Yooooo thank you i disconnected my battery for 30 min after an oil change so everything can reset. My charger had a Chrysler screen with no audio and back up camera wasn’t working. This worked instantly!
Sweet! The '14 & '15, you held the volume and tune center buttons together. Something changed between the '15 and the '18 and I couldn't figure it out!
Thank you for this comment. I have a ‘15, and I couldn’t figure out what to do.
Thank you sir !
I have a 16 challenger I held the volume and time buttons and it worked as well
Tune*
Damn you came in clutch
Sound is baaack!!! It worked!! Thanks Keith I really appreciate you Brother PEACE✌
Thank you so much. Like everyone else here I was going to either freak out or call the dealer. This was very helpful. Cheers
It worked, thank you very much. My radio kept scrolling through the presets. Peace and Blessings!
Outstanding!
MIND DOES THE SAME THING..I RESET IT..WORKS A DAY R TWO..THAN REBOOTING AGAIN..DEALERSHIP SAY BRING IT IN WE WILL FIX IT FOR A CHARGE..BE SAFE EVERYONE
That's what mine is doing gota try this 👍👍
Bruhhhh I love you man. You saved me a whole day at the dealership.
I did this exactly how he said to do it. It worked!!! I have a 2020 Challenger R/T. Thanks for the help!!!
How you do it it didn’t work for me
Jeez, how could I have missed that invisible button up there??? Great video, it saved me a trip to the dealer! Thanks!
You and me both!
Thanks for the excellent advice on the soft Reset - Worked like a Charm!!
Thanks my Brother I was tripping out my screen went blue no sound now its good. Thanks again 🙂👏👏
Yes sir!
Had to change my battery in my 🐱, this corrected everything. Thanks bruh!
Pause
This did not work on my 2018 Charger R/T but others commented about hold down the vol button and tune button at same time and that did work for me.
It didn't work for me
Didn't work either way on mine
I was worried my screen was messed up. Just needed a reset thank you man!
Worked thanks radio been trippn for months now appreciate you
Thank you on behalf of all of ARABIA my man 👍🏼👍🏼👍🏼
Good man. I was having problems with my Bluetooth. This fixed it and it connected to my phone right away. Thank you!
Outstanding!
What year? Mine is 2013
Same here. SMH
Does it work for 2013 Dodge Dart Uconnect that phone/Bluetooth will not work? Button is greyed out in menu.
Help, please?
Thx bro I was worried about my scat pack radio going out…. U saved me
Thank you very much my screen went pitch black ⚫ and I was very surprised 😮 and simply didn't know what I did ____ then BOMB! Like 👍 KOBE I!! In the 4th QTR bruh your vid was a life saver. My screen is back on and running like a champ 🏆 again 💫💫💫💫💫. Keep up the good work bruh and Bless up 😇🙏🏾🤙🏾
Bro, you saved my life.
This fixed my radio. God bless you!
This saved me so much frustration!
Dude... Dude... I so owe you a beer!!! Thank you..!!!!
You are most welcome and Michelob Ultra please lol
Appreciate this video bro it really worked.
You're the man! Thanks!
Awesome bro it worked😮😅😂😊
Will this work on my 2013 because my phone won’t connect
This works for hellcats too 💯👍🏼
Does this help if device won’t connect for Bluetooth with connect on 2023 hellcat
Does it fix navigation?
This applies to a 2017 Srt Charger...holding the two dials didnt work for me
Dude you’re a GOAT
Does it work for 2013 Chrysler 300?
Can this work for my 2013 Dodge charger R/T..?? Cuz I just got mine 2 days ago and I’m having Bluetooth connectivity problems with my car..
Thank you this just fixed me right up man you're a God
Bro
Outstanding!
@@OfficialKeithInTexas how do you rest when it freeze and stay on dodge
Man you saved us a lot of time and money thank you bro
Love you for this!!
Thanks for taking the time to post this very helpful video. Keep it up.
Thank you. Fixed my random CarPlay issue.
Must be for chargers above 2015 doesn't work in my charger
Thanks for the tip but I got one question how do you make the sound cuz I just bought a car a Dodge Challenger and the sound is not working can you show me how?
This helper first try I have a 17 charger rt and my radio wouldn’t turn on. Held the top till it showed the dodge logo
Hey Keith great video so I just updated my screen to the 8.4inch but now I have sound out of 1 speaker only will this reset help me
If sound is coming out of 1 speaker, you may need to check that your wiring is fully connected to the unit. Also, and I know this may sound trivial, but check your sound balance to make sure the speaker icon is in the middle of the diagram.
my 2020 charger scatpack won’t initialize bluetooth. tried to use multiple methods including this but nothing works to reset it. i might disconnect the battery when i get home and see if my uconnect 8.4 bluetooth starts to work again. might check after work before i go home if it just fixes itself 😢
I had to disconnect my battery at 1 point connected to back roll for about 10 to 15 minutes. And everything went back to normal so hopefully this will work for you
Can you do it while driving?
Will this work on a 2019 dodge? Bc I’ve tried it and it didn’t do it. And I also tried holding down the power button and tune button together and no luck
I think Dodge has since updated their radios as I'm seeing that people with cars that are 2018 and newer will not be able to use this.
Can you help, we purchased this radio for a 2011 Dodge journey code is not working?
This doesn't work.
Yeah it doesn’t work for me either you ever figure it out?
I have a 2017 and the radio nor the backup camera will turn on, any idea how I can fix this?
Does this work for a 2012 Dodge charger v6 sxt my clock is off by hours
Does it work for 2012 charger
I just got my Challenger 2017…
I’ve set everything for my IPhone. Now it won’t pickup my phone or my music from my phone.
I’ll give it a shot
2016 Durango R/T uses a different soft reset method. with engine/key in RUN mode, hold down the big round (left/right) Volume & Tune buttons for at least 10 seconds until the screen goes black, then release to allow the soft reset. this may have fixed a Bluetooth and USB connection issue I was having.
EDIT - Lost the bluetooth (audio-only) connection after i restarted my Durango. so with engine running, I did the Uconnect soft reset again and BANG the bluetooth audio automatically started playing a podcast I had open on my iphone. so maybe I will have to keep soft resetting every time I want Bluetooth audio? I will report back if that’s the case…
EDIT 2 - at this point, I’m sure I am not the only one getting this repeated problem, but the Uconnect’s Bluetooth audio connection immediately stops when I simply switch iphone apps to the UA-cam app from an Apple Podcast that’s already playing normally over bluetooth as it should. why would Bluetooth or Uconnect care what app I am using? UA-cam previously played audio over Bluetooth just fine before this connection issue started a year or two ago. only solution I have found is to use a lightning-to-headphone adapter and plug into the AUX/input to get hardwired audio from my iPhone, which I have got used to before I started troubleshooting again today. now I’m thinking it may be an iOS or android update issue that’s affecting the Bluetooth connection to this older 2016 Durango’s Uconnect system which also doesn’t support Apple CarPlay or android auto. I also did an official mopar OTA update to Uconnect 1-2 years ago, as well as a paid USB-stick update for new GPS maps, but I don’t recall if the Bluetooth audio problems started after that. But I should have a fairly up-to-date Uconnect firmware so who knows. back to using hardwired AUX/Line-in I guess…
THANKS
It sounds like you're trying to use Apple Play on a system not designed for it. If when you switch apps on your phone and your bluetooth goes out? That's your phone cutting it off, not it's target. The U-connect wouldn't know the difference unless it's video. I have an 18 Charger and it works very well with my phone, but it's Android. That might or might not make a difference. My car won't let you play any videos on the central screen however. It's illegal. If the passenger side has a separate screen, that's allowed. Or back seat screens is allowed. But not a central screen in view of the driver. I understand there are hacks available, but that might be what you're up against.
Unfortunately I had to give up using Bluetooth after I concluded the last Uconnect software update I ran must have permanently messed it up. So now I just run a short cable from my iphone to the Durango's Line-in port which works every time. my 2016 Uconnect system never had Apple CarPlay, but I have had other issues since the last Uconnect update that affected the car's GPS memory and preferences as well.
Take out the fuse from the fuse block with the car off. keep it out for 2 minutes and put it back in. That should cause a master hardware reset. @@Schweigardt
@@dannysdailysthere a fuse for the radio?
This only actually worked once and that was the first time I tried it yesterday. Does this mean there is something more wrong with my Bluetooth and Uconnect?
It may be the version that you have. What year is your car?
Official Keith In Texas 2017 Chrysler 300S
Hi I have the same make and model and I was able to get it to work by doing what Keith said just on the opposite side of the screen top left corner . Good luck
@Armondo Cortez my booth tooth is hit or miss at best. Sadly I can no longer rely on Bluetooth in my car. I just us the car play. Are you having the same issue?
@Armondo Cortez really, that actually worked? I'll have to try that this weekend. Thank you for sharing this.
Real one!! Helped me out big time family
How do you use the usb phone connection cause when I try it says “unsupported device”
You may want to try a different cable. Make sure it's a data cable and not just a power cable
@@OfficialKeithInTexas ohhh oh thanks bro
Is this year or model specific....I tried this on my 18 RT and it doesn't reset....I've tried it several time holding down for 10 sec 15 sec 20 sec 30 sec.....I'm probably doing it wrong 🤷🏽♂️
i have a 2018 hellcat charger...didnt work for me either... what are we doing wrong?
Got a 19GT also didn't work
I have a 2018 Charger R/T and to do the reset I had to push and hold the volume and the tune button for about 10 seconds
@@boonziez this worked for my 2500 thank you!!!
@@boonziez car wasnt actually running?
So for the first time ever this reset didn't work and its always been my go to whenever the USB ports act stupid but today no matter how many times I reset they still don't work so what should I do next, disconnect battery?
Try that and see if it works.
Nice
hey bro, my screen won’t stop freezing but i have the 2012 charger so this doesn’t work for me.. any idea what would work?
I would try disconnecting the battery, waiting two to three minutes and then reconnecting the battery.
Official Keith In Texas i did try that the other day, nothing changed.. super confused.
What about siriusxm radio doesnt work?
How about for an Challenger 2017
Thank you so much! I hate the fact it disconnects and won't pick it back up sometimes. Chrysler 300 2017
I have 2018 GC limited and i have tired this and the volume and power together and still nothing doesn’t wanna reboot ???
Mine is stuck on the dodge screen it doesn’t even get into that part yet and it plays the radio but I can’t turn it up or down
YOU ARE A LIFESAVER!
Thank you so much worked on 2017 challenger
Awesome!
Can the car be on when u rest it
The car can be on, just don't do a full start.
This worked perfectly! Thank you!
Only my display is digital. All my buttons are regular buttons and not on the display like yours. Any suggestions?
I don't have a touch screen radio. I need help resetting my radio PLEASE
My songs don’t show on the screen which is weird any tips ?
Can I do this on my 2018 Chrysler 300 ?
I have 2014 charger & I don’t think the screen holding works
You the goat for this man 💯
didn't work on my 2018 hellcat charger, what am i doing wrong?
2018 chrysler 300s, uconnect with no nav (I believe they changed it for 2018 models and after)
1. Car in run mode
2. Click on the Phone icon. (Will read no phone connected). Do not x out of this screen
3. Hold the top right corner of the screen for about 13 seconds *It may take longer. Let go when chrysler logo appears
4. Uconnect should soft reset.
Great info!
Any update ?
Something so simple lol it worked thanks
I'm glad it worked for ya!
I have a 2011 Dodge Charger, I tried that and it won’t reset. Can i disconnect the battery and will that fix it?
When you disconnect the battery, your radio might show the Chrysler logo instead of the Dodge logo. It happened to my radio when I got a new battery. I just turned the car off for about 10 minutes and then turned it back on.
@@OfficialKeithInTexas I try and touch the phone on the u connect and it won’t even do anything. I’m thinking it’s my Bluetooth module
How about for an older Uconnect system? 2015 to be exact.
I'm not sure on the 2015 models
@@OfficialKeithInTexas Thanks much. I will keep looking. I definitely want to get the Bluetooth to work again.
Hello, thank you so much for sharing the information. however i am still having some issues. everything connects to the bluetooth but as soon as I try to call someone, the voice disappears, same thing happens when i receive a call. i have to switch the call to my phone and then talk which is a quite a pain while driving. do you have nay suggestions. Thanks my car is the dodge caravan 2013
My screen is all black will this work?
Still works...june 2021
My uconnect in my Durango gets stuck every time I sit in it after I've turned it off and when the radio shuts off. Then the next time I go to start it up the screen will not work, and gets stuck on the loading screen, the music still plays but I won't have access to any controls. Does anyone else have the same problem? Mine is a 2018.
I have exactly the same problem as you! I'm a dodge charger and when I took off the screen cover, it was very hot inside. Have you found a solution yet?
I have a 2018 Dodge Durango and I can’t get it to do the soft reset
THANK YOU SO MUCH
I had to boost My 2017 5.7l rt and now my screen is completely different and shows Chrysler instead of dodge. Also the radio will not work even at full blast
What if your screen is black?
Thank you.🥃😎👍
Why won’t this work for me 😩😩 2012 rt
Hello how to connect internet to my chrysler screen 8.4 it’s 300c 2015 thank you
Thanks brother. 👍
Does this apply to the dodge durango2018 gt
I'm not sure, but I would guess that it doesn't. Team Durango, please sound off.
@@OfficialKeithInTexas ok thanks is this a Durango in this video
Its a 17 Charger
@@OfficialKeithInTexas o wow thanks
was NOT able to get to the soft reset on my 2016 Durango R/T. my iPhone or android phones seem to pair Bluetooth normally, but there is no audio through Uconnect. and Uconnect won’t even recognize the iPhone when using a lightning-USB cord plugged into the console. my guess is Chrysler pushed out an OTA update to the Uconnect which messed things up.
EDIT - I just used the L/R Knob soft reset method (below) and looks like my bluetooth issue was fixed. Someone else said that Uconnect gets stuck when you use other input methods like USB or AUX/Line- in, and it won’t take audio from Bluetooth even though the phone pairs normally.
Try holding down the big round volume & tune buttons for 10 seconds until the screen goes black, with engine/key in run mode, and your problem may be fixed.