Fantastic work, you gained another subscriber, and the planet thanks you for your dedication in a world where everything is disposable. And Parkside items are considered disposable by LIDL, as there are no replacement parts or repairs. That was their response when I needed a part to carry out a repair.
😮Astounding fix indeed, more like a complete rebuild of the whole machine, when he had finished his rewiring and put it back together the machine runs so smoothly, better than new in my opinion. He did an excellent job on this tool, respect !
hands down this was best video i found for rewinding and fixing motor. ty so much. came here to check how to remove chuck and learned so much more. ty so much.
Just happened to stumble upon this video and have only one word to describe you; "GEEK". I mean that with the utmost respect. I watched every single second of your video and I have to say that I was gobsmacked. I totally enjoyed every second of it so, thanks very much for the upload. Great Video. 👍👍👍😘
As always, you did a great job once again. I have been following you for quite some time, and I notice that you repeatedly make a small mistake, but of great importance. The way you re-screwing back the screws it puts you at risk of cross-threading and damaging the plastic. When I do this, I always turn the screw counterclockwise, until I feel the thread-step ensuring that the screw and the threads have matched.... Keep doing this informative and great job. Salute from Cyprus
I also always do this but not only in plastic, I do it in all screwing situations to avoid running the risk of grinding the thread. Good recommendation.
לדעתי ומתוך ניסיון של שנים לא מעטות הגעתי למסקנה לשים מעט גריז או שמן על הבורג והבורג ניכנס לתבריג שלו מקלות ללא צורך לכוון.גם בפתיחת בורג בפלסטיק אני שם ספרי חלודה והבורג נישלף בקלות רבה.
I think I can consider this video educational. Because you looked very skilled . Now I can repair my drill. Thank you very much for bringing this video to watch and I wish you more 💕 success
A very very impressive Teardown & Rebuild, especially the gearbox, I totally enjoyed every second of it so very very impressive, skilled and explained in every details. Thank u for not putting and music very detailed video, simply loved it all the way till end. Thank you so very much for sharing.. Very best and sincere regards from Pakistan.
È sempre un grande piacere seguirla in queste riparazioni, apprezzo soprattutto il fatto che siano fatti senza parlato ma si capisce tutto e quindi potenzialmente comprensibili da tutti nel mondo, è un grande pregio
U was thinking the same thing, very detailed and in depth. The only improvement would be list the wire again in comments and the type of grease used as some will attack plastics so I guess this was something special?
Que bueno cuando se Tienen 02 cosas 1) CONOCIMIENTO. 2) HERRAMIENTAS. Mis Felicitaciones por hacer un Buen Vídeo. Saludos Cordiales Carlos Camacho República Dominicana.
Are you sure for what you said about right hands ? I have a friends who definitely can't use right hands... They will be happy to give em left hands 🤣🤣🤣🤣🤣
Veramente molto bravo!! Grazie 🙏🙏 per il tuo insegnamento! Hai riparato una cosa che di solito tutti gettano nei rifiuti . Secondo me dovremmo riparare di più come facevano i nostri nonni. Ci sarebbe più lavoro per chi ripara e un contributo per il clima e per le risorse del pianeta che sono sempre più limitate 🤷♂️ . Ciao 🙋
Excelente, muy buen vídeo, con paciencia se logra lo impensable, felicitaciones, muchas gracias por hacer ver lo complicado muy fácil, saludos desde Colombia
Такие на мусор надо выбрасывать , их там много валяется , батареи испортились , выбрасывают , покупают новый . 2 батареи стоят больше чем шуруповёрт новый с 2 батареями . От вас Китай далеко , вот и ремонтируете.
Intresting you are a expert in fixing armature i go for 90degree rule from commutator point ....5 pole motor.....once i forgot putting epoxy after winding .....rotor unwinde n seized .... double work
Söylenecek söz bırakmadınız.Elinize sağlık.Harika bir iş çıkardınız.Matkap güçlü.Önemli olan da güç.Boşta çalışırken 2.devirde de olsa sanki çalışması ağır gibi görünüyor izlerken.Matkap ucu takılıp boşta 2.devirde izlemiş olsak yanılp yanılmadığımızı anlamış olurduk.Diyede söylemeden edemedim.Yanlış anlamayın.Tam profesyonel bir ustalık gösterdiniz tebrik ediyoruz.
It is remarkable to see how much skill and patience goes into repairing this screwdriver. But there was one thing you didn't do and that was balancing the anchor after it was finished. I wouldn't buy Parkside because the tools aren't sustainable enough. They don't last long and have no fuses to protect the motor from overload. But that shouldn't diminish your work. Good job.
אני מישראל יש לי מעבדה לתיקון כלים ורוצה לציין שאתה בעל מקצוע מוכשר .אני עובד בשיטה שלך כי ממש כך אני עובד.סדר ניקיון וכל דבר במקום הנכון.אהבתי מאוד תליפוף של העוגן למרות שמנוע כזה עולה מעט כסף אבל הידע שחילקת איתנו הוא ערך מוסף למקצוע המעניין הזה.לא כל אחד יכול לכן אני שמחתי ליראות תסירטון הזה.תודה רבה❤
Excellent repair of the drill. It was very interesting to watch the entire process. I do not think any normal person can do such a fine work. You must be professional in this field.
Extraordinaria destreza, paciencia, trabajo riguroso, meticuloso, puede sentirse bien orgulloso de su saber hacer, al igual que afirman en otros comentarios acá, felicidades es poco, ud puede restaurar, limpiar con pulcritud y reacondicionar cualquier cosa que se proponga, ¡¡enhorabuena!!! 👏🏼👏🏼👏🏼
@@zana3587 sim é muito útil, sigo todos os seus vídeos e já aprendi muito consigo. As vezes, quando tenho dúvidas, procuro informações nos seus vídeos. Muito obrigado e que Deus abençoe seu trabalho. Um abraço
Very interesting and gentle job. of course you must be perfetional about this to can doing it with this good quality. Anyway, at general I enjoyed frome this much joust and exact working. God bless , and I wish success for you.
20A down to 2A, that's a huge drop in the current draw; do you have any idea why it was so hungry for Amps? A _very_ impressive teardown & rebuild, especially the gearbox & clutch! Thanks for this most impressive video. 👍
Tutti i filtri Strumenti SafeSearch Circa 11.100.000 risultati (0,28 secondi) Italiano Inglese Perfect work, incredible precision and care in the recomposition, the art of reviving a drill is truly exceptional. I wanted to ask you how the 14 revolutions on the armature are calculated and what type of grease you used to lubricate. Thanks again, I had never seen a such precise and accurate reconstruction work. Thanks again, congratulations you have a golden art in your hands. The subscription to your channel was made with immense pleasure and a great or very great like for you, all deserved. I live in Italy Hello
What is the lube/grease you use in the syringe please? I have one I dropped and it seems now the gearbox is jammed, will try and fix it now. t Thanks Dave
Great video. Thank you ! No dissturbing "music" on the speech or on the work voicies.
Thank you !
I played this video though a bluetooth speaker in my garage. My wife thught I was busy making something.
Fantastic work, you gained another subscriber, and the planet thanks you for your dedication in a world where everything is disposable. And Parkside items are considered disposable by LIDL, as there are no replacement parts or repairs. That was their response when I needed a part to carry out a repair.
😮Astounding fix indeed, more like a complete rebuild of the whole machine,
when he had finished his rewiring and put it back together the machine runs so smoothly, better than new in my opinion. He did an excellent job on this tool, respect !
hands down this was best video i found for rewinding and fixing motor. ty so much. came here to check how to remove chuck and learned so much more.
ty so much.
Just happened to stumble upon this video and have
only one word to describe you; "GEEK". I mean that with the utmost respect. I watched every single second of your video and I have to say that I was gobsmacked. I totally enjoyed every second of it so, thanks very much for the upload.
Great Video. 👍👍👍😘
Real Grand Master of repairing power tools. Thanks for uploading video.
I never watched a long video this is the only time (not boring). Very impressive, skilled and explained in every details, awesome
thank you sir
Amazing! Fascinating repair to watch. Thank you!
thank you sir
It is more than a fix, it is a full restoration. Full respect!
Hxjgg
😂 meserie tată...felicitari...!
As always, you did a great job once again. I have been following you for quite some time, and I notice that you repeatedly make a small mistake, but of great importance. The way you re-screwing back the screws it puts you at risk of cross-threading and damaging the plastic. When I do this, I always turn the screw counterclockwise, until I feel the thread-step ensuring that the screw and the threads have matched....
Keep doing this informative and great job.
Salute from Cyprus
thank you sir and thank you for information
Good point. I myself turn the screw counter clockwise till I feel a click then I tighten the screw. This way screw thread meshes with hole thread.
Ed center
I also always do this but not only in plastic, I do it in all screwing situations to avoid running the risk of grinding the thread. Good recommendation.
לדעתי ומתוך ניסיון של שנים לא מעטות הגעתי למסקנה לשים מעט גריז או שמן על הבורג והבורג ניכנס לתבריג שלו מקלות ללא צורך לכוון.גם בפתיחת בורג בפלסטיק אני שם ספרי חלודה והבורג נישלף בקלות רבה.
Как всегда- познавательно и наглядно! Приятно смотреть..Имею такую же модель -теперь знаю как ремонтировать..Спасибо!
спасибо, сэр, я надеюсь, что это полезно для вас
@@zana3587 очень трудоемкая работа, если случится опокалипсис то это будет чрезвычайно ценно.
Thanks for a great explaining video I wish I had seen before taking apart my Makita cordless drill. Was a great failure.
I think I can consider this video educational. Because you looked very skilled . Now I can repair my drill. Thank you very much for bringing this video to watch and I wish you more 💕 success
A very very impressive Teardown & Rebuild, especially the gearbox, I totally enjoyed every second of it so very very impressive, skilled and explained in every details. Thank u for not putting and music very detailed video, simply loved it all the way till end. Thank you so very much for sharing..
Very best and sincere regards from Pakistan.
same here
Thank you very much for this detailed disassembling and repairing video
È sempre un grande piacere seguirla in queste riparazioni, apprezzo soprattutto il fatto che siano fatti senza parlato ma si capisce tutto e quindi potenzialmente comprensibili da tutti nel mondo, è un grande pregio
grazie signore spero che ti sia utile
U was thinking the same thing, very detailed and in depth. The only improvement would be list the wire again in comments and the type of grease used as some will attack plastics so I guess this was something special?
Класс!!! Ремонт супер!! Как всегда-с перемоткой якоря!!
спасибо, сэр, надеюсь, вам понравится
Que bueno cuando se Tienen 02 cosas
1) CONOCIMIENTO.
2) HERRAMIENTAS.
Mis Felicitaciones por hacer un Buen Vídeo.
Saludos Cordiales
Carlos Camacho
República Dominicana.
Awesome restored sir and very clearly showed part by part sir thank you so much.
thank you sir
انت محترف .. لو ان الجميع عمل بطريقتك لكانت الشركات المصنعة أغلقت منذ زمن .. امتعتنا يا صديقي .. شكرا لك
INcreible amigo... lo genial es que compartes tu trabajo... un abrazo y gracias por compartir
THIS IS THE BEST AND ACURATE TUTORIAL EVER I'WE SEEN.
NOTHING MORE NEEDED EXCEPT TWO RIGHT HANDS AND A BRAVE SOUL TO BEGIN.
🎯
thank you sir i hope it's helpful for you
Are you sure for what you said about right hands ? I have a friends who definitely can't use right hands... They will be happy to give em left hands 🤣🤣🤣🤣🤣
Veramente molto bravo!!
Grazie 🙏🙏 per il tuo insegnamento!
Hai riparato una cosa che di solito tutti gettano nei rifiuti .
Secondo me dovremmo riparare di più come facevano i nostri nonni.
Ci sarebbe più lavoro per chi ripara e un contributo per il clima e per le risorse del pianeta che sono sempre più limitate 🤷♂️ .
Ciao 🙋
Excelente, muy buen vídeo, con paciencia se logra lo impensable, felicitaciones, muchas gracias por hacer ver lo complicado muy fácil, saludos desde Colombia
Такие на мусор надо выбрасывать , их там много валяется , батареи испортились , выбрасывают , покупают новый . 2 батареи стоят больше чем шуруповёрт новый с 2 батареями . От вас Китай далеко , вот и ремонтируете.
Great appreciation for the precision of screwdriver renewal, congratulations, best regards 👌.
thank you sir
@@zana3587 thank you 😀.
Великолепная работа !
У вас золотые руки !!!
Здоровья и успехов вам!
Hello,
Very good work very meticulous, excellent renovation.
thank you sir
Intresting you are a expert in fixing armature i go for 90degree rule from commutator point ....5 pole motor.....once i forgot putting epoxy after winding .....rotor unwinde n seized .... double work
Te felicito! Limpio, metódico ... que gran trabajo
very best professional job that i´m seen! Congratulations!
на одном дыхании захватывает впечатляет . СПАСИБО
Tuyệt vời! Thầy điện cơ sửa chữa máy mạnh thêm số 1.
Que buen técnico me gustó.mucho ese trabajo gracias por la orientación muy inportante
Söylenecek söz bırakmadınız.Elinize sağlık.Harika bir iş çıkardınız.Matkap güçlü.Önemli olan da güç.Boşta çalışırken 2.devirde de olsa sanki çalışması ağır gibi görünüyor izlerken.Matkap ucu takılıp boşta 2.devirde izlemiş olsak yanılp yanılmadığımızı anlamış olurduk.Diyede söylemeden edemedim.Yanlış anlamayın.Tam profesyonel bir ustalık gösterdiniz tebrik ediyoruz.
Evet Metin bey, izlemekten keyif aldığım bir işçilik çıkardı Arkadaş... Tam anlamıyla Profesyonelce
only change motor is ok
Endüvi sargısını sararken 1 - 2 dilimlerine ekranda üste 1-2 5 yazıyor.ilk başta ( 51234 ) diye sıralanıyor.sargı 1-2 iken 5 ne anlamadım…keza 2-3 sarılırken 1 yazıyor.bilgi verirmisiniz selamlar,çok iyi çalışma.
clean - fast - effective - AWESOME Thank you
Limpio - rápido - efectivo - IMPRESIONANTE Gracias
thank you sir
It is remarkable to see how much skill and patience goes into repairing this screwdriver. But there was one thing you didn't do and that was balancing the anchor after it was finished.
I wouldn't buy Parkside because the tools aren't sustainable enough. They don't last long and have no fuses to protect the motor from overload. But that shouldn't diminish your work. Good job.
Exelente la restauracion mi hermano saludos desde panamá👍👌👏🇵🇦🙋♂️
A well executed and edited video.
thank you sir
Mi sono addormentato.......vivevo un sogno di smontaggio e rimontaggio con una MEMORIA top. Bravissiomo.
It's amazing repairing
Good watching. Thanks.
Great work and patience
Very well done. Hats off to you sir.
thank you sir
Good for you! Just one little note. I would also balance the impeller. This would reduce the risk of damage.
شرح عملي بكل التفاصيل الدقيقه اهنئك صديقي احسنت🌹
اشكرك اخي العزيز
Super porada, od A do Z.
Dziękuję Panu
@@zana3587 Mieszkasz w Polsce? Mam do naprawy silnik z odkurzacza i wiertarki z Parkside?
Sir, Your work is " Excellent "
Much more patience than I had trying to fix my own! I replace the motor instead 😀
thank you good man
It looks like a 550?
PARABÉNS PELO TRABALHO SHOU DE BOLA NOTA 1000
obrigada
Sensacional.....! Ótimo profissional!
Dahen, you have an extraordinary talent. Thank you for yet another brilliant video.
thank you sir i hope it's helpful for you
1
Saludos desde Venezuela estado Táchira gracias por compartir tus conocimientos EXCELENTE VÍDEO sigue adelante
Excellente vidéo pédagogique. Félicitations
אני מישראל יש לי מעבדה לתיקון כלים ורוצה לציין שאתה בעל מקצוע מוכשר .אני עובד בשיטה שלך כי ממש כך אני עובד.סדר ניקיון וכל דבר במקום הנכון.אהבתי מאוד תליפוף של העוגן למרות שמנוע כזה עולה מעט כסף אבל הידע שחילקת איתנו הוא ערך מוסף למקצוע המעניין הזה.לא כל אחד יכול לכן אני שמחתי ליראות תסירטון הזה.תודה רבה❤
Excellent repair of the drill. It was very interesting to watch the entire process. I do not think any normal person can do such a fine work. You must be professional in this field.
thank you sir i hope it's helpful for you
@@zana3587 aáA
Buenas noches bendiciones para todos
Extraordinaria destreza, paciencia, trabajo riguroso, meticuloso, puede sentirse bien orgulloso de su saber hacer, al igual que afirman en otros comentarios acá, felicidades es poco, ud puede restaurar, limpiar con pulcritud y reacondicionar cualquier cosa que se proponga, ¡¡enhorabuena!!! 👏🏼👏🏼👏🏼
gracias amigo al parecer solo usted y yo somos latinos por aqui
@@melvinansonywilliamledesma4811 saludos 😊👋🏼
Cok başarılı ve eğitici bir video olmuş emeğinize saglik
Merci de la démonstration voué êtes vraiment très très fort.
Skil yang sangat luar bias
Perkerjaan sulit pun dengan tenang di kerjakan
Good job bro... 🥰
GOOD VIDEO. Just one question, what type of greese did you use for the gear box?
O senhor é fantástico, aprecio muito o seu trabalho, parabéns. Um abraço
obrigado senhor espero que seja útil para você
@@zana3587 sim é muito útil, sigo todos os seus vídeos e já aprendi muito consigo. As vezes, quando tenho dúvidas, procuro informações nos seus vídeos. Muito obrigado e que Deus abençoe seu trabalho. Um abraço
بسیار عالی خیلی چیزهایی که ساخته اید بلد شدم میسازم به امید موافقیت
ممنونم دوست خوبم متشکرم عالیه
修理一連の工程が、詳しく・省略無く・無駄の無い、綺麗な作業です
グリースの塗布もシリンジ方式で成る程、適量塗布できると感心した、
早速真似してフリ工具の修理してみます、大変勉強になった有り難う。
Master is the only word I can write about this guy!
Esse cara é muito bom valeu obrigado
Best seen so far , greetings from Germany
Yaptığın işçilik bu konu hakkında profesyonel olduğunu gösteriyor Teşekkürler çok zor bir iş
K de pièces !!! Dans une perceuse.. Très belle demanstatiion... J ai encore appris aujourd'hui.. Merci
Świetnie zrealizowane. 👍
Dziękuję Panu
Niesamowity człowiek z tego faceta.
Wiedza ogromna i zdolności manualne na najwyższym poziomie.
@@1r3k1970 gdyby serwisanci mieli połowę tych umiejętności, to byłoby rewelacyjnie. Mam sporo sprzętu parkside i na pewno wykorzystam jego instrukcje.
معلم وموهوب تستحق التقدير والاحترام
اشكرك اخى العزيز
Thank you very much and good luck with your work ✌️✌️👍👍👍👌👌
Your rebuilt motor is probably better than the original. Nice video.
thank you sir i hope it's useful for you
I was thinking that: also more and better quality grease and lovingly assembled!
Bravo! That was fantastic!
thank you very much for this tutorial video to fix the armature in detailed
Excelente..!!...Muy Bien....gracias por Compartir...Saludosss
gracias señor espero que le sirva
Muy buen trabajo .pensaba que no lo montabas...ni queriendo .mucho mimo y luego la primera ostia pa ir asentando las piezas ...
Now i will give a try to rewind dc motor the way you described with numbers 🔢 awesome 👍👍
Como sempre formidável *****TOP
obrigado senhor
Great videos great channel 👍
Thank you sir
Very interesting and gentle job. of course you must be perfetional about this to can doing it with this good quality. Anyway, at general I enjoyed frome this much joust and exact working.
God bless , and I wish success for you.
thank you sir i hope its helpful for you
20A down to 2A, that's a huge drop in the current draw; do you have any idea why it was so hungry for Amps?
A _very_ impressive teardown & rebuild, especially the gearbox & clutch!
Thanks for this most impressive video. 👍
@Luigi Candurro Haha, so, basically, because the whole drill was a bit pants! It's certainly _not_ pants anymore. 😄
Tutti i filtri
Strumenti
SafeSearch
Circa 11.100.000 risultati (0,28 secondi)
Italiano
Inglese
Perfect work, incredible precision and care in the recomposition, the art of reviving a drill is truly exceptional. I wanted to ask you how the 14 revolutions on the armature are calculated and what type of grease you used to lubricate. Thanks again, I had never seen a such precise and accurate reconstruction work. Thanks again, congratulations you have a golden art in your hands. The subscription to your channel was made with immense pleasure and a great or very great like for you, all deserved. I live in Italy Hello
man , this guy is good
Perfect. Bravo.
*Excellent work* 👍👍
thank you sir
What is the lube/grease you use in the syringe please?
I have one I dropped and it seems now the gearbox is jammed, will try and fix it now.
t
Thanks
Dave
Çok iyi, bilgilendirme icin teşekkürler.
Top Video und exzellente Arbeit👍
Er macht das nicht zum ersten mal 😉
فيديوهين في أسبوع واحد
هو ده الكلام
شكرا يا غالي
اشكرك معلم منك نتعلم
손재주가 너무 대단하십니다
Çok teşekkür ederim arkadaşım uygulamalı görüntü çok iyi hazırlanmış emeğinize sağlık
Advance technology, great talent and skill, great video. Better than the new drill.
O cara é muito bom no que faz 😂
Thanks a lot for this useful video. I like it so much.
واقعا لذت بردم و آفرین عالی بود ❤
very informative thank you very much :)
Fantastic work ❤❤❤
really impressive, I like the idea to repair things though it does not make sense for an economic stand point. Very good job!
B
Great job. thanks
Just beautiful! Was shocked to see over 20 amps being drawn, could have toasted the batteries otherwise.
Creative video, thanks :)
Ручна робота має свою ціну.Вона завжди на висоті.😊.
GUARULHOS SAO PAULO BRASIL ARRASOU FANTÁSTICO
obrigada