Chevy Equinox Exhaust Replacement - How to Replace a Muffler on a 2011 Chevy Equinox GMC Terrain
Вставка
- Опубліковано 10 вер 2024
- (1) Walker Rear Muffler - amzn.to/2VHQIKT
(1) Walker Intermediate Pipe - amzn.to/2Ux2if4
(1) Mid Muffler - amzn.to/2UTYCne
(4) Hardware Hanger - amzn.to/2UUNgz3
(3) 2 1\4" Clamps - amzn.to/2GcjkVQ
Lisle 17350 Pipe Stretcher Kit - amzn.to/2DeOfQH
This video covers the process of replacing the exhaust system from the muffler to the tailpipe on a 2011 Chevy Equinox. The process covered in this video will be the same or similar on many other vehicles including a GMC Terrain and GMC Acadia. In this video, I replace the muffler, intermediate pipe, resonator, hangers and clamps on a 2011 Chevy Equinox. The muffler often develops a leak at the welded seam on a Chevy Equinox with a 2.4-liter engine.
The process covered in this video repair tutorial will be the same or similar on most vehicles including U.S. and Canadian models of:
2005 - 2016 Chevrolet Equinox
2005 - 2012 Pontiac Torrent
2005 - 2016 GMC Acadia
2005 - 2016 GMC Terrain
(1) Walker Rear Muffler - amzn.to/2VHQIKT
(1) Walker Intermediate Pipe - amzn.to/2Ux2if4
(1) Mid Muffler - amzn.to/2UTYCne
(4) Hardware Hanger - amzn.to/2UUNgz3
(3) 2 1\4" Clamps - amzn.to/2GcjkVQ
Lisle 17350 Pipe Stretcher Kit - amzn.to/2DeOfQH
Click here to subscribe bit.ly/ngdysub1 and don't forget to select the notification bell!
Mark Jenkins is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
Disclaimer:
Due to factors beyond the control of Mark Jenkins, I cannot guarantee against improper use or unauthorized modifications of this information. Mark Jenkins assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Mark Jenkins recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Mark Jenkins, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Mark Jenkins.
(1) Walker Rear Muffler - amzn.to/2VHQIKT
(1) Walker Intermediate Pipe - amzn.to/2Ux2if4
(1) Mid Muffler - amzn.to/2UTYCne
(4) Hardware Hanger - amzn.to/2UUNgz3
(3) 2 1\4" Clamps - amzn.to/2GcjkVQ
Lisle 17350 Pipe Stretcher Kit - amzn.to/2DeOfQH
FYI, you don't technically have to buy the rear most muffler if you don't want to. It is possible just to cut the OEM pipe at the right spot, there's another video floating out there that will demonstrate such. This is what I did on my 2013 equinox, with no leaks having just used basic auto parts store horseshoe clamps.
Great video and I really appreciate the attention to detail by showing the offset of the Walker setup.
Great video. Thanks for pointing out the muffler offset issue - I noticed that also. Good to know that the pipe will compensate.
Cool might just do this myself since they make the parts. Last couple times I had some work done at my local muffler shop they just ordered the stuff and I had to wait anyway
Nice Job!
Must have warmed up a bit where your at, definitely a Spring, Summer, or Fall job (for me anyway) :)
Difficult to film, so thanks for the footage!
Great Video!
Thanks for the video
You're welcome!
So with this resonator the writing will be facing down instead of on top?
Good Video! Curious though, why cut the rear muffler off first? When you remove the mid muffler doesn't the whole thing come off all together?
Makes hammering the mid off easier with less weight to push
My question exactly. Has me thinking i need to be ready to cut but im thinking i could drop it all out together
@@chasegoodard3721 That's what I did... Dropped the whole thing together. Just needed to support the rear muffler with something to keep it level with the mid muffler while I hammered the mid muffler off. Didn't realize it's been 3 years already...
Great video...did it today Great instructions .
What a great video. 👍
you said resonator, that is what is wrong with mine, but on you list, is that what you are calling the mid muffler?
The Equinox has 2 mufflers (1 x rear & 1 x middle) & a resonator. In this video, I never seen the resonator. Hmmm,
the first muffler is called resnator
Don't you have to weld the seams?
with exception of the muffler that cheap ass pipe will maybe last 2 years and it will rot out. sucks that they don't make an actual replacement resonator
Probably true, but it's better than paying $780 for the OEM assembly that has already proven to rot out in 5 years.
A lot of tutorials and nobody use exhaust paste
No need to. Even horseshoe clamps will seal correctly.