@@janavi8058 at the back it has 4 transit bolt to remove and it has also a plastic cover when you remove the said bolt.. Its included from the accessories..
That's not SE, that's 5E, it means that the water is not properly draining out of the washer. Something may be clogged, jammed, or blocked and thus preventing water from draining out of the washer
My question is why none of the washing machine manufacturers either LG / Samsung / etc recommend a stand for their washing machine or providing a stand to protect this machine..? they are fools..? or unnecessary we are using stand for our mental satisfaction, we are fools..?
If you can ensure that the bottom of the washing machine remains clean and dry, then you do not need a stand to be honest. Without the stand, the center of gravity is closer to the ground and the machine will perform better. However, in many cases it becomes difficult to clean the floor under the machine due to low clearance OR you need to move the machine frequently. In such cases you will definitely need a stand made from strong metal (as the machine itself weighs 50-60 kgs). Keep in mind though, after installing the stand you need to absolutely ensure that the washing machine is level (you can use a spirit level app on your mobile to check) and run the calibration again. Any vibration or shakes will get amplified on a stand since the center of gravity is higher. In my case it was the cardboard rat cover that was making a rattling sound due to vibration in spin cycles. I added some cloth padding under it and now the noise is okay.
This video is very helpful..... Now I can install my wishing machine 🙏
Super video 👍..
Thank you❤
Oh…. Thank Samsung Philippine.
The QR code English version won’t work (the link is for a private video)
It’s annoying isn’t it! I found the same problem
AAAAAAAAAAAAAAA IM HAVE THIS OLD WASHING MACHINE
I bought it but I am seeking a sheet to cover it from bottom to save it from mouse etc. May I get it?
😂
Work perfekt
Where we can spare parts as for replacement? Ex. D control panel
What is the model number of the unit used?
3:45 CM
When I set it for 15 minutes 400 spin , at the end of before 2 minutes it come out front side and heavily shaking, is it ok ?Plz inform me.
Have you removed shiiping bolt?
@@taufiq6573 no
@@andrewinata3639 where is this blots
@@janavi8058 at the back it has 4 transit bolt to remove and it has also a plastic cover when you remove the said bolt.. Its included from the accessories..
does your machine also has dryer
Why 7 kG Front Loading Washing Machine isn’t available in Bangladesh?
Because can
how to fixed SE error on my samsung washing machine?
That's not SE, that's 5E, it means that the water is not properly draining out of the washer. Something may be clogged, jammed, or blocked and thus preventing water from draining out of the washer
WUUUUUTHEEEEEEEEHELLLLLLLLLLLLLLLNOOOO
Am receiving DC error..
The ad is annoying!!!!!
This isn't even an ad
Can I connect with hot water tap?
Please reply me
Check your back side of washing machine it mention cold , only some machine has two water inlet hot and cold
No
No need it has an automatic heating element.... You just see the temperature if you want to adjust..
My question is why none of the washing machine manufacturers either LG / Samsung / etc recommend a stand for their washing machine or providing a stand to protect this machine..? they are fools..? or unnecessary we are using stand for our mental satisfaction, we are fools..?
If you can ensure that the bottom of the washing machine remains clean and dry, then you do not need a stand to be honest. Without the stand, the center of gravity is closer to the ground and the machine will perform better.
However, in many cases it becomes difficult to clean the floor under the machine due to low clearance OR you need to move the machine frequently. In such cases you will definitely need a stand made from strong metal (as the machine itself weighs 50-60 kgs).
Keep in mind though, after installing the stand you need to absolutely ensure that the washing machine is level (you can use a spirit level app on your mobile to check) and run the calibration again. Any vibration or shakes will get amplified on a stand since the center of gravity is higher.
In my case it was the cardboard rat cover that was making a rattling sound due to vibration in spin cycles. I added some cloth padding under it and now the noise is okay.
@@PreetamDas64what on God’s green earth is a cardboard rat cover sir ?
I want only wash without Spin....Is it possible??
Yes it is. Simply press the spin button until it sets to no spin
Yes in every model
what model is this?
I think one that we will never afford😂😂😂🙏🏻🙏🏻 ✊🏻✊🏽✊🏾✊🏿
Model code: ww70h5200ew17c
Pls reply
I think spare parts must be accessible to prolong d life of d machine.
B,n,r,gudebanda
☝🏻