Thanks for the video I was running my erevo on this beautiful Sunday an broke my front shaft. I'm ordering my hole shaft front metal for the front an back thanks.
Same exact problem i had and im wondering if its just better to leave the shaft plastic or would i have to replace the front one to metal as well? I hope i hear back from someone.
I injected the centre drive shaft with expanding resin . The axle shafts twisted . Got new Lipo’s and it’s running at 72 mph and the centre shaft is still rocking it with no upgrade . Had to upgrade the axle shafts as the twisted off the scale like screws
Yeah mine broke it looked like rock scraped it and weakens it but I never found rock I. There but the signs on the shaft were like somthing make it weak and it was like shaft was going around somthing anyways put this one in I’ll be good... I just smoked out a mother on this yesterday but I beat this thing for whole good year putting new motor I’ll post a video on that soon
@@davidryansargent6731 yeah my servos kept on braking but by no steering u mean the. Don’t work at alll if u have spare servo try that on to see if it works some times ur servos can go bad
I beat mine so bad, jumping off the house huge jumps! Best ready to run out there! You do have to modify a few things out of the box but not much. I’ve never broke my center shaft but a metal one is tits! Always tighten by hand once you get close with power tool. Coming Tom old school mechanic.
Saw this video right now Immediately ordering ass three blues aluminum skid plates from integy They have made up most of my 1/16 e revo right now it’s gonna have around $500 into that thing and it would suck to break the thing
I own most Arrma and traxxas cars, any how to videos let me know! Thanks guys, and give this UA-camR a sub for sure!!!! Picking up my outcast 8S here soon as well. 🇱🇷
Nice!!!! I haven’t driven mine in over a year, so many cars!!! I will upgrade when mine breaks!! GREAT VIDEO!
SpeedSyko yeah I feel that way I got too much so I be planning scale buy scale speed runs taking turns so they all get their turns
👋 Hello. Your subscriber from Ukraine is writing to you 😎. I wanted to ask - will this Center Drive Shaft fit the Summit???
Thank you👍💪
Not sure bro
Thanks for the video I was running my erevo on this beautiful Sunday an broke my front shaft. I'm ordering my hole shaft front metal for the front an back thanks.
Same exact problem i had and im wondering if its just better to leave the shaft plastic or would i have to replace the front one to metal as well? I hope i hear back from someone.
I injected the centre drive shaft with expanding resin . The axle shafts twisted . Got new Lipo’s and it’s running at 72 mph and the centre shaft is still rocking it with no upgrade . Had to upgrade the axle shafts as the twisted off the scale like screws
Ooft, that was totally and truly banjaxed! Good job on the fix dude 🤘
Mine broke in the same exact spot and I only had it for half a day. Turns out a rock got in there some how.
Yeah mine broke it looked like rock scraped it and weakens it but I never found rock I. There but the signs on the shaft were like somthing make it weak and it was like shaft was going around somthing anyways put this one in I’ll be good... I just smoked out a mother on this yesterday but I beat this thing for whole good year putting new motor I’ll post a video on that soon
@@rcusa201 now i have no steering.......have you had alot of problems with yours?
@@davidryansargent6731 yeah my servos kept on braking but by no steering u mean the. Don’t work at alll if u have spare servo try that on to see if it works some times ur servos can go bad
@@rcusa201 it was my servo so I upgraded it with one that was 100 Bucks! Now I have to figure out what is wrong with my smt10 grave digger 🤔
@@davidryansargent6731 yeah good job I put in 2 savox servos $80 each
How has the erevo durability been overall? It holds up well?
Peter Ronzoni holds up really good best rc I got dosent top over on sharp turns good handling
I beat mine so bad, jumping off the house huge jumps! Best ready to run out there! You do have to modify a few things out of the box but not much. I’ve never broke my center shaft but a metal one is tits! Always tighten by hand once you get close with power tool. Coming Tom old school mechanic.
I take something back, best car out of box MOJAVE AND 2nd IS REVO. I love the revo though!!!!!
GREAT Video Helped me a LOT😃
Glad it helped!
Thanks bro this video really
Helped me with fixing this pain in the ass !!
No problem I just did video on servos had terrible experience so I made video comming up soon
@@rcusa201 will watch !
I recommend a set of hand tools from Integy. Beats the ones supplied with the vehicles.
Saw this video right now
Immediately ordering ass three blues aluminum skid plates from integy
They have made up most of my 1/16 e revo right now it’s gonna have around $500 into that thing and it would suck to break the thing
I’m doing the rear diff right now
Where do you get those shafts from?
Ebay
Stones destroyed the plastic shaft
your servos are very misaligned they are constantly fighting agents each other and they are going to die a lot faster like that, its a easy fix
Haha they died I got new ones and did aligned them these were like this from stock
@@rcusa201 yeah mine were like that too from factory I just saw a yt video warning about that
🔥👍👍🔥
Nice helpful video 👍
I own most Arrma and traxxas cars, any how to videos let me know! Thanks guys, and give this UA-camR a sub for sure!!!! Picking up my outcast 8S here soon as well. 🇱🇷
Don t switch the intended breaking point
Goldene 8 I though about that but let’s see erevo is strong 💪🏻