Exactly why I'm building mine with an arcticcat THUNDERCAT 900 TRIPPLE direct drive to a chopper prop.. Guarentee a 30 horse outboard isn't beating me 😂
I had the same idea but in the bow slighty foward a midsship. With an out board aswell. Jet drive For striking net so i can just run it over and have no problem.
Was bout ask how long are the boats , already have a 10ft since I was little, just think it's to small , to do what I want with it . think I would go around 16'-20' for the jet john I'm looking to build.
I have made that same run up canyon so many times in my 15 ft 900 zxi jet Jon. Looks like you guys built yours just like mine for the most part, looks good.
I see you recessed the drive into the hull of the boat --- I have also seen it where it is mounted directly on the back without being recessed inside why did you decided to do that
Dennis Eckmann just wanted to protect it some. Without the recess it would stick out almost 16” . It’s just a few 1/4 bolts going into aluminum holding it together didn’t want any strain on it if we went over a log or something. I also plan on building aluminum tubing around it at some point to protect it further
You had zero penetration on some of those pieces. Do a quick search on here, idk what your settings are but doesnt look hot enough and wrong angle of attack. Might be better off with rivets in some of those spots. Welding aluminum is not easy like steel and most people don't realize it so at least it held up as well as it did.
How is an outboard smokin u?
Awesome man!! I just got done my 16' seado 787 110hp if your interested in any build vids theyre up!
I have that same little Yamaha... Great motors!
Sweet build! I love canyon lake too 👍🏻
Exactly why I'm building mine with an arcticcat THUNDERCAT 900 TRIPPLE direct drive to a chopper prop.. Guarentee a 30 horse outboard isn't beating me 😂
Master chef herd it 3 jet 3. Bunk beds inncabin
I had the same idea but in the bow slighty foward a midsship. With an out board aswell. Jet drive For striking net so i can just run it over and have no problem.
Is there a link to the video of building the boat?
Was bout ask how long are the boats , already have a 10ft since I was little, just think it's to small , to do what I want with it . think I would go around 16'-20' for the jet john I'm looking to build.
Evolution 52 150 hp jet or trained 20 150 hop jet 20 f I t searayray dundacer. Cabin crser 16 f I t 20 foot cabjn cryserr jet drhve
Love it boys !! Minty as all hell
7.3 90's Bronco! That sounds like a winning swap! Nice build.
Another awesome video Kevin.
I want to build one these. I think I should get a better welder.
I have made that same run up canyon so many times in my 15 ft 900 zxi jet Jon. Looks like you guys built yours just like mine for the most part, looks good.
Master chef pollycradt 4.8. 90 hp jetoutvard csbin crusrr
Any problem actually registering it? I want one for Lake Whitney
How bout pop rivets?
That place is gorgeous, where is it?
Canyon Lake, TX
Rebecca creek
how shallow can it go ?
is that oj simpsons old bronco
Was that the Demolitia truck with that welder?
Robert Healy Negative
Is that the OJ Simpson bronco?😂😂
I see you recessed the drive into the hull of the boat --- I have also seen it where it is mounted directly on the back without being recessed inside why did you decided to do that
Dennis Eckmann just wanted to protect it some. Without the recess it would stick out almost 16” . It’s just a few 1/4 bolts going into aluminum holding it together didn’t want any strain on it if we went over a log or something. I also plan on building aluminum tubing around it at some point to protect it further
If you flush mount it you need pods
What river is this?
Up river above Canyon Lake
Good job very fast
Rebecca's creek????
You had zero penetration on some of those pieces. Do a quick search on here, idk what your settings are but doesnt look hot enough and wrong angle of attack. Might be better off with rivets in some of those spots. Welding aluminum is not easy like steel and most people don't realize it so at least it held up as well as it did.
Y’all from Texas
Haha that my welding rig 👌
What are they running a briggs and stratton 5 hp on that jet boat. Slow!
kbg fast
What pump?
Yamaha 650cc 2 cylinder 2 stroke out of a stand up jet-ski.
next time back it up with bolts and don't be cheap on welds
i stepped in dog shit
If the weld broke.... it was NEVER good
Ethan Davis just rushing to get on the water. Forgot to fully weld out all the tacks. Won’t forget next time!
the date on this video makes me sad. 1 week before the assholes took over the world. NIce video though