I had the exact save thing happen to my meepo board, I have yet to find a replacement washer/spring to put back into the board to eliminate the free play
have you changed the bearings ? I have got an issue i have a pomelo board the hub started to make a bad vibration and its so bad its unridable ,i can find any pomello site where i can buy new skins for ir any one please help me
My board also makes a strange howling sound when accelerating or braking. In reality it is louder than it appears in the video to be. Any ideas? Maybe the bearings? ua-cam.com/video/cihPQVBbC14/v-deo.html
Not really. A few weeks after this the speed controller went bad and messed up the other motor. So I never got the chance to mess around with it too much.
@longboardtechnology Hi, mate! I know it was long time ago, but recently I had the same problem and it looks like that for my situation the root cause were defected bearings (I've changed them with difficults, but sucessfully) and inoperated Hall sensor. By the last item here is cool guide (pls.refer to video below) by diagnostic and changing (sorry, it's on Russian, but it has subtitles I hope). I changed my sensor (1 of 3 on "noisy" wheel) and I can confirm that this below guide is applicable for TeamGee H20 ua-cam.com/video/14BZ051n6R0/v-deo.html Best Luck!
Good video bro. Keep them coming. You helped guide many people to the source of ther problem by a least eliminating different diagnosis.
did you ever fix it? My son has the same problem, that damn washer broke apart and it works, but isnt the same.
I have the same issue withat clicking noise, gotta take a look when I manage to put these screws out.
Could be the inside bearing or the rotor bearing rubbing on the stator
I was thinking the same thing. Thst would require more work in taking it apart, obviously.
I had the exact save thing happen to my meepo board, I have yet to find a replacement washer/spring to put back into the board to eliminate the free play
how about a normal longboard bearing spacer usually goes in front of the bearing before the nut
Me too
Aye, electric skateboard hub motors have came a long way since these designs!
have you changed the bearings ? I have got an issue
i have a pomelo board the hub started to make a bad vibration and its so bad its unridable ,i can find any pomello site where i can buy new skins for ir any one please help me
What make and model board is this in the video?
I had the same issue on mine. The issue was stupid... one of the connectors on the esc was disconnected and it caused that to happen...
My board also makes a strange howling sound when accelerating or braking. In reality it is louder than it appears in the video to be. Any ideas? Maybe the bearings? ua-cam.com/video/cihPQVBbC14/v-deo.html
Hello! :) Did you ever get to the bottom of the issue?
Not really.
A few weeks after this the speed controller went bad and messed up the other motor. So I never got the chance to mess around with it too much.
I JUST HAD the same noise as you. and i believe i fixed it by replacing the washer/spring
@@LongboardTechnology
Check the inside spring washer next to inside bearing. Access to it by taking motor off truck. 4 bolt motor plate.
@@yuvalsharabi9985long time ago, but where did you buy the replacement spring? Lol
Sounds like a bad baring
@longboardtechnology
Hi, mate!
I know it was long time ago, but recently I had the same problem and it looks like that for my situation the root cause were defected bearings (I've changed them with difficults, but sucessfully) and inoperated Hall sensor.
By the last item here is cool guide (pls.refer to video below) by diagnostic and changing (sorry, it's on Russian, but it has subtitles I hope). I changed my sensor (1 of 3 on "noisy" wheel) and I can confirm that this below guide is applicable for TeamGee H20
ua-cam.com/video/14BZ051n6R0/v-deo.html
Best Luck!