I'm looking forward to the day you guys release a push/pull rally shifter that will bolt onto the the front of the DD wheelbase. Pretty sure they would sell like hot-cakes to the rallying crowd. That new BMW rim is rather nice, it'll be a nice addition to my Fanatec rim collection.
The paddles are a different shape and size on the advanced paddle module due to them fitting around the other 2 paddles (on each side). I've designed and made my own 3mm carbon fibre ones as a replacement.
2015 LMP4 cars ( yeah, like F4 for LMP ) have 2mm shifter paddles and it, flexing a bit, that’s normal for race cars to have it as small as possible to gain weigjt
can these be added to the wrc wheel? looking to get into sim racing and looking to purchase a set-up soon, and would like to add these if they will work.
My biggest question is: can you mount these guys on the BMW rim? If it's about the connectors not being compatible, would it be possible, under the loss of warranty ofc, to use these magnetic shifters with the original BMW switches (only the switches themselves with the other connector)?
question about these...can you use them in the holes closest to the wheel when using the advanced button module on the xbox hub??? i noticed you cant use either the standard hub shifters and the advanced paddle module unless you use the rear set of hole which i find is annoying to me, even with the spacers....
Not compatible with Formula Black / Carbon / F1® Esports, what the hell are you guys doing? Why use a 4 Pin connector for a simple up and down shift and make it unusable for 80% of your own steeringwheels? Sorry, but that makes zero sense. I was really happy to upgrade my formula black but now I can throw it away... At least a adapteroption should be possible. :(
I don’t think the esport version has the 2 sockets needed however I suspect you could convert it to the existing 2pin connector. But I’m only guessing.
The connector is different. If you can replace the good connector yourself go for itv: I have this paddles on my f1 2020 they are great. Much better than paddles from NSH or even the ones from SRM (I was sure the SRMs were the best)
Not compatible with Formula Black / Carbon / F1® Esports... due to their 4 Pin connector decision, ridiculous. Don't know if it's possible to use an adapter for that.
Fantastic video. Makes it all seem so simple compared to the instructions 👍👍👍
I'm looking forward to the day you guys release a push/pull rally shifter that will bolt onto the the front of the DD wheelbase. Pretty sure they would sell like hot-cakes to the rallying crowd. That new BMW rim is rather nice, it'll be a nice addition to my Fanatec rim collection.
Glad I'm not holding my breath.
@@Bob-Jenkinshaha
Do you sell the 3mm carbon paddles separate in case we brake the ones from the advanced peddle module?
The paddles are a different shape and size on the advanced paddle module due to them fitting around the other 2 paddles (on each side). I've designed and made my own 3mm carbon fibre ones as a replacement.
Time to step up the universal hub to a proper button box that could be sold separately.
these paddles are more quality than podium since they are ticker...
Fanatec logic.
2015 LMP4 cars ( yeah, like F4 for LMP ) have 2mm shifter paddles and it, flexing a bit, that’s normal for race cars to have it as small as possible to gain weigjt
I hope you know they also made the podium ones thicker
What is ticker?
Hashim Samna they changed it ?
Thanks 👍
Good work!
Hows about fix your customer support.
Would this setup only work on the Podium Wheel Base or would it work on the DD Pro ??
can these be added to the wrc wheel? looking to get into sim racing and looking to purchase a set-up soon, and would like to add these if they will work.
Unfortunately this module is not compatible with the CSL Elite Steering Wheel WRC.
My biggest question is: can you mount these guys on the BMW rim? If it's about the connectors not being compatible, would it be possible, under the loss of warranty ofc, to use these magnetic shifters with the original BMW switches (only the switches themselves with the other connector)?
Sadly not. The early wheels have no mounting points to carry those.
question about these...can you use them in the holes closest to the wheel when using the advanced button module on the xbox hub??? i noticed you cant use either the standard hub shifters and the advanced paddle module unless you use the rear set of hole which i find is annoying to me, even with the spacers....
when is the new QR be shown ?
Not compatible with Formula Black / Carbon / F1® Esports, what the hell are you guys doing? Why use a 4 Pin connector for a simple up and down shift and make it unusable for 80% of your own steeringwheels? Sorry, but that makes zero sense. I was really happy to upgrade my formula black but now I can throw it away... At least a adapteroption should be possible. :(
I think the answer to that might be: they don't use a normal switch but a Hal sensor. Which needs a at least 3 pins (+5V/-0V/Output).
@@BungeeGum1 I guess there is no adapter on the market that can go from 6 to 2 pins, the only way is maybe soldering.
I Had to took it off, my wife couldn't sleep.
not compatible with my old universal hub, thanks for that. I mean, its just a simple switch right?
Why are they not compatable with the clubsport f1 eSports wheel?
I don’t think the esport version has the 2 sockets needed however I suspect you could convert it to the existing 2pin connector. But I’m only guessing.
The connector is different. If you can replace the good connector yourself go for itv: I have this paddles on my f1 2020 they are great. Much better than paddles from NSH or even the ones from SRM (I was sure the SRMs were the best)
Yeah I just checked and the connector is different
Not compatible with Formula Black / Carbon / F1® Esports... due to their 4 Pin connector decision, ridiculous. Don't know if it's possible to use an adapter for that.
@@HomieFFM well for the eSports the wire is soldered in
Dommage que les frais de port gonfle la facture de 26%
to bad you guys didnt ship to indonesia i want one
If only these worked on the m3 gt2 rim.
Do these fit McLaren GT3?
No
🧐🧐🧐🧐🧐
911 RTR please
the customer/technical support is so bad you can wait weeks for a message to get back.