How To Rebuild A Diesel Engine. Part 1. Cylinder Head Disassembly And Removal. Twin Turbo Cat C13.
Вставка
- Опубліковано 21 бер 2017
- You can help the Adept Ape Channel for free! Just click the Amazon Affiliate Link and any purchase helps: www.amazon.com/gp/product/B00...
Have you ever wondered how to rebuild a big truck Diesel engine? In this video series an entire engine is going to be inspected, disassembled, repaired, and rebuild. Everything from the oil pan to the valve cover. In part 1 the cylinder head and turbos are going to be removed and inspected for damage. Tune in for the next video which will cover the pistons, cylinder liners, rod, and main bearings. Thank you for watching. - Авто та транспорт
Hello Josh,
Thank you for doing this. I am an owner operator of a dump truck with a C10. Your videos and information have been a tremendous help.
Congratulations on you new addition to your family.
Transitioning from working on tanks to CAT equipment has been a challenge.. Your videos have helped me out so much. Keep posting content. Thanks!
I have rebuilt Cummings and International's but never a cat this will be a great series to learn from thanks for doing it.
Yess, looking forward to the rest.
im glad i stumbled onto your channel! you make some awesome videos!. im not a heavy truck mechanic, i just work on cars and light trucks etc, but i love watching and learning about them anyway. really looking forward to seeing the rest of the rebuild series . keep up the great work!!
+Kyle Veilleux Thanks for commenting and watching the videos 😀
Good videos mate. Props from Australia 🇦🇺
Awesome. Can't wait to see part 2. 😆
3:02 scared the shit out of me
Why?
"Just tap it"
BANG
@@regiskendall9363 fucking too loud
Awesome video, Josh. I'm very excited about this series! Great and informative videos as always.
+Maxx Edwards Thanks for watching. You're an original commenter on this channel too, I guess I'm still doing something right.
@@AdeptApe hi i have a C13 on my 2007 peterbilt 379 short hood truck ran perfect but was restricted at 65 miles an hour from the company i purchased it from so i went to a shop they bumped that up the my RPMS where really high so the suposably got my tire size and diferential and another number multiplied it and came up with 29,000 ish and replaced it for the original 34,000 and something number or there truck rpm got lower and ran good coming out of the shop as soon as i hooked my trailer and i began pulling empty my pyro gauge temp went hot turned the red light on and as soon as i let my foot off the throttle it comes back down PLEASE WHAT can that be the guys at the shop say what they did had nothing to do with the pyro temp PLEASE PLEASE HELP.
Very informative video series; thanks. It would be great to someday see a video on how you deal with timing gear inspection, removal, installation, etc. I'm trying to read how to do this out of my school textbook and getting a head ache due to the way they word everything.
This is one gem of a video.
Hey you left us hanging, could you please finish the series?
Great work this rebuild will be o so good thanks for sharing
+Kerry Gleeson Thanks for watching.
so glad to see that you take great pride in your work and product. I know good mechanics are hard to come by. thanks for the videos. 👍🏽
+jeeptech75 Thanks for watching 'em.
how many years with Cat now?
+jeeptech75 12 this year. Dang, I'd be more than half way to retirement in the military, but there is no way out of Cat, it is a life sentence lol.
like your video `s ,I really enjoy watching them ,thank you
Nice vid adept
Awesome 👍👍
very useful videos Josh, I can't get proper knowledge on how repair these engines here in Pakistan and your videos are very helpful. I aspire to work for cat as a Diesel technician.
+Kamil Mastoor I should have the Piston Pack removal one coming out in the next few days as well so stay tuned.
Sorry for so many grammatical errors. Just saw that you replied.
@@AdeptApe Can you reuse the injector hold down bolts?
would love to have a serious of rebuilding a c12 also would love one on how to install jake brakes for the c12 alot of trucks (like mine ) came without the jakes
Keep it up with the vids!
Good jobs guys
Great video
very nice job.
great vid bud!! TY
+CAT DIESEL POWER Thanks for watching.
Adept Ape dam rite pard I love your vids! BTW question for ya in your opinion is it still ok to dump a quart of ATF IN the fuel tank every 4th fill up is how I do it and I know for fact in my history it has helped alot in older cat engines but I'm wondering about this new EPA Crap engines if it will hurt them to do it? thanks
THANK YOU. can you do some volvo d13 2014 main bearings
Hi Adept, love the videos, very helpful. I am working on my C12 now looking for cause of low warm oil pressure. At 7:34 on this video you show an oil plug, what is the story on that plug? Is this something that can come out? My engine acts like it has loose bearings, good pressure cold but when it is warm its down to 35 at 1600 and 15 to 20 at idle, so not good. Main and rod bearing clearances measure out good so looking for other issues now. Thanks!
This pushed me over the edge! Signed up at my community college for diesel technology, and after that hopefully if I'm a natural diesel technician transportation tech. I've been working union since I was 19 time for a change!
+Ricky Gonzalez.O good luck, it can be a really fun job with the right shop and boss.
Great content?
Cheers! 🙏
Just heard about your channel through Stephen Cox and looked you up. Gave you a sub. I used to turn wrenches on trucks but got burned out and got out of it.
+jimgam730 what are you doing for work now, if you don't mind me asking?
working in the cable tv industry as a service tech and it sucks. not sure why I stuck with it so long but I have. thinking now i'm too old to get back into it, almost 60
Could use your help rebuild #1 last November didn’t go so well looks like I have a cracked head already
thx Seth Mcfarlane
how do you keep a good pair of boots in this field and is it okay to use steel toed.
I have a question what if a piston broke pieces all over but engine still rotes with a engine hot temperature code and the block and crankshaft look good and rotate good can I have them checked in chassis's or can't be reused because of overheat thank you?
very nice . Thank you
teach us more!
I did not get the reason why the Head bolts are single-use bolts?
What do you bolt to when lifting a 3406e cylinder head? Which bolts do you use?
Numbers stamped on conrods always on the same side as the cam?
which cat do you work at? We got carolina cat and Gregory poole here in NC
wat is the ring gap and clocking of the rings on a 3406e cat
I did a series on cat motors to there a lot easier in a rebuilding like cummins The cats are a lot easier especially in their overhead design
+The Snap-On Junkie!!! The C13 gets a little complicated on the overhead adjustment, but timing it and everything is easy. We have a young guy at work and he couldn't believe you don't even have to time them during a rebuild.
Adept Ape ha ha that's funny
Do a C-9
Bro, sound correction on the air hammer! lol
High Josh, I have a 6.0 diesel 2003 Ford f250 w/ auto trans. I can't figure out why it keeps blowing my oil cap and cracking it. I did replace the oil pressure Guage. You have any idea?
U think it’s good idea to rebuild the engine at Volvo for 28k???? Pleased answer me please
Hey Josh!!
Hello.
6:55 🤣🤣👍🏽
I have a 1995 3126 he has only two valves what's the different 3 valve 3126 in the block
Gotta love the truck drivers, "that's not how I would do it" great vids man...bailed me out on programming a ecm the other day......how long does a in frame generally take you?
+heavy chevy This one is quoted at 66 hours I believe. It's a Platinum kit so we are doing more than just a standard inframe. Oil pump, water pump, oil cooler, and addition seals and inspection.
Yea platinum is way to go with head being junk and gets you the injectors too.i had a c7 like a week ago come in on hook for no start, I dead headed the transfer pump and found no fuel pressure. ..so pulled huei pump and the gear was held on by 1 thread....just curious if it's a real common thing ? thanks ,don't mean to be a bother
+heavy chevy I like answering questions, kinda the point of the channel. Yes that is a common problem I'd say maybe 1-2 out of 10 HEUI pump failures is the drive nut getting loose.
C12
Can you do a detroit Series 60?
What's the price of labor and parts?
Let the dog be the judge, if my dog likes you than I like you.....so there.
Josh,
I'm looking to buy a boat, and this boat has a pair of 3126 450 HP engines in it.. o
According to the owner, the fuel injector tip broke off on one cylinder and damaged the engine. They are suggesting a new liner, piston and head.
My thought is if I'm going to do that, why not just rebuild the entire engine?
I'm pretty mechanical minded and I've rebuilt several GM 350 & 454 gas motors in the past, but I've never tackled a diesel before. In your opinion, is it something that can be done by a guy like me, or should I leave this to a professional?
Also, what differences are there between the on road engine and the marine engine? I would plan on removing the engine from the boat and do the rebuild in my garage. Any idea of what a full rebuild kit would cost for these engines?
I really enjoy your videos!
Dave
If your going to strip it down that far and have the funds to do the rebuild then do it. Your only going to regret it down the line if you don't and then have an engine fail at sea. The 450HP marine engines are pretty "hard worked" engines as they have upped the HP quite a bit in comparison to the road versions which are usually rated between 190-300 IIRC. The extra HP is because the marine engines are designed to give more power and stability up on the plane at consistant high RPM where the road versions are designed for low down torque. You need the HP in the marine version as its the RPM's that matter not the torque. Actual parts wise they aren't much different. If you have done rebuilds before then go for it yourself and do the rebuild. You will save a tonne of money and learn about the engine along the way so your more capable at handling issues in the water. At the end of the day you have 2 engines so you aren't relying on one completely.
Make how to get into Heavy duty mechanic
Did you go to a school if so were and if not where did you learn how to do this stuff
6:54 Funny!
😍😍
adept ape, do you have any videos about wastegates, and removing the line that go's to it to disable it?
want to know if its safe to do and what to know about it
+Christian Russo I have a boost video that discusses it, but don't have one that I can remember that talks about disconnecting it. Depending on the engine you have it can cause the engine to have a check engine light and derate if you plug it. The wastegate on most of the Cats doesn't really limit the boost by very much though, perhaps a few psi and if you have an older Cat like a 3406E, the extra couple psi won't hurt it most likely. Just do it at your own risk.
its a mbn motor having a low boost problem, looks like the turbo compressor was changed within the last few months but not sure
+Christian Russo I would pinch the wastegate off and see if it makes a difference, if it doesn't then you have most likely a CAC leak, exhaust leak, plugged muffler, or something else going on with it.
thank you, ill try to pinch the line tomorrow and send you a update
you do custom ecm tuning?
+Andy Nguyen Other than Car rerates, no we don't.
+Adept Ape Cat not Car.
Hey adept I heard that CAT is in some trouble legal wise .. you got any comment?
+Johnathen Thompson This sounds like a press conference, ummmm no comment. No I guess the IRS raided some building in Peoria where Cat headquarters is and the reason I'm not sure. Cat has been shrinking slowly since the housing crisis so maybe something was going on with their numbers, but I don't have any idea. I wear a work shirt so they don't tell me anything.
Sorry didn't mean to make it sound like a press conference lol but I really want to work with cat in the future I'm about to graduate from UTI and just wanted to know if it's something I should worry about
I hate having to tell customers about major failures. The look of confusion and anger usually directed at you could probably destroy alderaan.
I didn't hear anything you said over you removing head bolts
+Trucker Chris I should have moved the video background sound lower and you could have heard me better. Just think of it as trying to talk in a shop, air tools ruin it.
Nearly died 03:00
Sir, me fitting c15 engine and c18 please send me drawings
Hi how can i get un touch with you i need HELP PLEASE!!!!!!!!!!
As I said before very good videos continue to upload more videos I learn a lot and I would like to donate send me your email 👌👌👌👏👏👏👏
+jesus torres AdeptApe@yahoo.com on PayPal sir.
U looking for job as a shop manager? 100+ truck company
Getting a bit more comfortable with UA-cam Josh ?
+Dan Dosreis Figured I could go by my first name finally, since people ask a lot what they should call me.
You never completed it.
To be honest,the hat is……emm
Limit the talking sir and finish the mission